Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Spiderbox Owners Chat!

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • pan1300
    replied
    Re: Spiderbox Owners Chat!

    hi toby

    I completely agree with you on this (think posted before, but don't remember in which topic it was) - anyhow: my findings were best result with only 1 or 2 lines active - further: I suppose this goes for receivers in general (not only spiderboxes - I even don't have one ).

    ps: this was in combination with an active freeserver of the box itself (don't know how to deactivate this with internet/server on).

    Leave a comment:


  • toby69
    replied
    Re: Spiderbox Owners Chat!

    just thought i would post this, i use a spider7000.

    as we all talking about lines here and there, i found that if you have too many lines, (that was in my box)>8 lines i had.
    problems opening chns, especially hd, cure was that i removed 5 lines, now only using 3, chns now open in seconds.
    so best not to be greedy, too many lines causes a lot of confliction, a couple of good ones is all you require, thats what i found anyway.
    comments welcome.
    toby

    Leave a comment:


  • Mobley3
    replied
    Re: Spiderbox Owners Chat!

    Originally posted by thecrazybandit
    Does anybody know how to enter cw keys in the hd9000 i can enter biss and any other type of keys but i cannot find were to enter cw in any of the setting
    I do not think you can M8, I seem to remember several occasions when this question was asked on the A***t forum and usually the same answer, that it was not possible, wish it was and hopefully someone will find a way.

    Regards Mobley3

    Leave a comment:


  • thecrazybandit
    replied
    Re: Spiderbox Owners Chat!

    Does anybody know how to enter cw keys in the hd9000 i can enter biss and any other type of keys but i cannot find were to enter cw in any of the setting

    Leave a comment:


  • toby69
    replied
    Re: Spiderbox Owners Chat!

    Originally posted by jeanpick
    I am up and running now on premium service, just a small hiccup, but Satlover sorted out. Thanks to Toby69 and others for help.
    --------------------

    no worries jeanpick, thats all were here for, to help good members like yourself.
    lets hope for much more viewing with the spiderbox.
    toby

    Leave a comment:


  • jeanpick
    replied
    Re: Spiderbox Owners Chat!

    I am up and running now on premium service, just a small hiccup, but Satlover sorted out. Thanks to Toby69 and others for help.

    Leave a comment:


  • empb
    replied
    Re: Spiderbox Owners Chat!

    @jeanpick. sure you will be impressed.

    Originally posted by Mobley3
    The Spiderbox 9000 can be used as both Client and Server if you so desire, it has the ability to do both. just be sure not to share any lines from Satlover Forum = Instant Ban.

    Regards Mobley3
    Thanks. Just sussed it, so I can now share my UPC card from Spiderbox to my Topfield (using Fausto/Season Interface for Client on my Toppy) with the Spiderbox Newcamd Server, just as you say have to make sure I have the SatLover servers OFF while I do this as the Satlover server also has 3* CaIDs 0D02 (Crypto), 0D97 (ICE), 1815 (Nagra) for UPC Direct active Very rare I would need 2 (let alone 3 - the toppy has two tuners) channels at the same time from UPC Direct, just good to know I have two card readers I can link to my PC...

    *Possibly More

    Leave a comment:


  • jeanpick
    replied
    Re: Spiderbox Owners Chat!

    Just have to wait now. In meantime I have put another freebie in, but now I am allowed into first hidden block cause of number of posts and they are a big improvement. cheers

    Leave a comment:


  • toby69
    replied
    Re: Spiderbox Owners Chat!

    Originally posted by jeanpick
    cheers Toby69, I have just been looking in premium members and sent a pm to Satlover. I´m not sure about how I get the lines.
    ------------------------------
    satlover should issue you with 2 sets of lines, just enter them in your spiderbox, as you would any other lines you have used previously.

    ---------------
    example only.

    Type :- CCCAM

    Name or IP Address

    Port:- *****

    ID:- probably your username then code

    Password:- www.satlover.com

    this just example, so good luck

    Leave a comment:


  • jeanpick
    replied
    Re: Spiderbox Owners Chat!

    cheers Toby69, I have just been looking in premium members and sent a pm to Satlover. I´m not sure about how I get the lines.

    Leave a comment:


  • toby69
    replied
    Re: Spiderbox Owners Chat!

    Originally posted by jeanpick
    Well, I´ve taken the plunge and as you may see I have my premium members badge, just have to wait now for email to come through with clines. Will let you know how I get on. cheers
    --------------------------

    good for you jeanpick.
    i have 2 servers and i also sometimes have problems, i think you wont be dissapointed with the results you get, nothing is never perfect in this game.

    Leave a comment:


  • jeanpick
    replied
    Re: Spiderbox Owners Chat!

    Well, I´ve taken the plunge and as you may see I have my premium members badge, just have to wait now for email to come through with clines. Will let you know how I get on. cheers

    Leave a comment:


  • thecrazybandit
    replied
    Re: Spiderbox Owners Chat!

    Originally posted by Archmage
    Motor control gives me these options

    store sat position
    goto sat position
    goto 0
    reset position

    BTW I checked my lat & long and they are ok.
    I am using USALS if that helps.

    Could it be the firmware version is wrong? I do remember there was an update which changed the appearance of all the menus.
    Try using diseqc then and see if you can bring it round to 30 west if this works store this position and try using Usals again

    Leave a comment:


  • Mobley3
    replied
    Re: Spiderbox Owners Chat!

    I personally have never used this aspect of the Spiderbox and as you say it is limited to 10 shares but then that is no problem when you just want to keep a close circle of " friends",
    there is also as you so rightly said the problem of abuse.

    Regards Mobley3

    Leave a comment:


  • Archmage
    replied
    Re: Spiderbox Owners Chat!

    Originally posted by thecrazybandit
    Go to menu then installations motor control then limit off this will disable the east and west limits
    Motor control gives me these options

    store sat position
    goto sat position
    goto 0
    reset position

    BTW I checked my lat & long and they are ok.
    I am using USALS if that helps.

    Could it be the firmware version is wrong? I do remember there was an update which changed the appearance of all the menus.

    Leave a comment:

Working...