Problem in 10892 H

[Jerry2020]

Hello all
I have a problem with the transponder 10892 H 27500 on Nilesat and on most other satellites.
On nilesat, I can receive all channels except this one. On other satellites, this transponder or close ones are very weak. Though I don't have problems with other transponders, and the dish is 180cm.
I can't figure out the reason.
Any help would be appreciated.

[skytec]

Re: Problem in 10892 H

Did you try exchanged LNB for another one ??

[zoran89]

Re: Problem in 10892 H

He could change LNB it is not expensive but it 99% will not solve his problem. 90% is not even this but try anyway, make some distance betwin sattelit cable and electrical wires, sometimes electromgnetic can distrupt some freqency.

[Jerry2020]

Re: Problem in 10892 H

Did you try exchanged LNB for another one ??

Yes, I changed it and exactly the same problem

[Jerry2020]

Re: Problem in 10892 H

He could change LNB it is not expensive but it 99% will not solve his problem. 90% is not even this but try anyway, make some distance betwin sattelit cable and electrical wires, sometimes electromgnetic can distrupt some freqency.

I tried to take directly from the dish and I had the same problem.
Anyway, should the shield stop interference, and I think electricity is 50/60 Hz which shouldn't interfere with the much higher frequencies of satellites, right?

[powerman]

Re: Problem in 10892 H

i think this TP sometimes have problem

[skytec]

Re: Problem in 10892 H

I tried to take directly from the dish and I had the same problem.
Anyway, should the shield stop interference, and I think electricity is 50/60 Hz which shouldn't interfere with the much higher frequencies of satellites, right?

This is very strange. Could be a problem in the receiver? Maybe some internal interference in tuner ... Try a different receiver?

[Jerry2020]

Re: Problem in 10892 H

i think this TP sometimes have problem

Could you explain more please, it is either weak or no signal on all satellites.

[Flostafa]

Re: Problem in 10892 H

do you have a universal LNB or a very old LNB? The old lnbs dont support the high band, so this could be the problem...

[zoran89]

Re: Problem in 10892 H

He have problem with low band not high band, and it is onli one frequenci so LNB is working properly.

[Jerry2020]

Re: Problem in 10892 H

do you have a universal LNB or a very old LNB? The old lnbs dont support the high band, so this could be the problem...

I have a universal lnb, all other tp's work except this damned one and those very close to it.
I even changed the lnb and the same problem was there.

[peremacedonia]

Re: Problem in 10892 H

Its transponder problem your lnb or wires its ok
u may try to move antena up down left right
1-2 mm to get strong signal

[Jerry2020]

Re: Problem in 10892 H

Its transponder problem your lnb or wires its ok
u may try to move antena up down left right
1-2 mm to get strong signal

I have a motor, and I tried to move east and west, with no success.
But it is the same satellite, other tp's have high signal, only this very weak.

[zoran89]

Re: Problem in 10892 H

It must be that something interfering on this freqenci, I have some masseur and when I turn on him picture on TV start flashing.

[Jerry2020]

Re: Problem in 10892 H

It must be that something interfering on this freqenci, I have some masseur and when I turn on him picture on TV start flashing.

Sorry, I can't understand