Problem in 10892 H

[odysseas1991]

Re: Problem in 10892 H

Interesting, I was reading about a similar problem on another forum where this exact transponder would not pick up on hotbird. Many people said that it was a LNB problem, in that it wasn't in its range, while the problem was solved. The solution was apparently the cable... Il pm you the link it thats ok...
Have a look, although its not on nilesat it might help. Another suggestion is slighltly tweaking the frequency in the transponder input screen?

Other than that Im not sure what else it could be... Gd luck and post the solution when you have found it.

[uttnls]

Re: Problem in 10892 H

Odysseas1991 you could be banned for that link

[uttnls]

Re: Problem in 10892 H

I have wireless router. I unplugged it, but with the same result. But I think other people in the building have wireless routers. Could this affect the dish?

On this particular transponder there are many people that also were using DECT phones and they reported signal issues.

That's why i was almost 100% sure that a DECT phone is the problem or something based on Wireless

[Jerry2020]

Re: Problem in 10892 H

Interesting, I was reading about a similar problem on another forum where this exact transponder would not pick up on hotbird. Many people said that it was a LNB problem, in that it wasn't in its range, while the problem was solved. The solution was apparently the cable... Il pm you the link it thats ok...
Have a look, although its not on nilesat it might help. Another suggestion is slighltly tweaking the frequency in the transponder input screen?

Other than that Im not sure what else it could be... Gd luck and post the solution when you have found it.

Thanks, I saw it before since I looked a lot for soution but in vain.
I tried disconnecting the cable and take directly from the dish to the box with the same result.

I don't have a wireless phone, but I don't know if anyone in the building have one.

I tried close freqs but got the same result.

On HB, the channels were working but the signal level was remarkably weaker than other frequencies.

There seems to be no solution.

[powerman]

Re: Problem in 10892 H

if you change location of your dish might be effective.

[Jerry2020]

Re: Problem in 10892 H

if you change location of your dish might be effective.

This is very hard
Many people live in the building, and the roof is crowded with dishes

[uttnls]

Re: Problem in 10892 H

Thanks, I saw it before since I looked a lot for soution but in vain.
I tried disconnecting the cable and take directly from the dish to the box with the same result.

I don't have a wireless phone, but I don't know if anyone in the building have one.

I tried close freqs but got the same result.

On HB, the channels were working but the signal level was remarkably weaker than other frequencies.

There seems to be no solution.

Do you have other box to try it, you could ask a friend or something just for testing to see what signal you have with other boxes

[Jerry2020]

Re: Problem in 10892 H

Do you have other box to try it, you could ask a friend or something just for testing to see what signal you have with other boxes

Yes, I tried 2 others, with the same result.

[powerman]

Re: Problem in 10892 H

This is very hard
Many people live in the building, and the roof is crowded with dishes

If its possible change location 1 or 2 meter and try again

[uttnls]

Re: Problem in 10892 H

Yes, I tried 2 others, with the same result.

Then it looks like a problem from the dish alignment or LNB.

Ask a neighbor to let you connect to his antena and see if the signal is better (you said that in your roof are lot's of dishes why don't ask a neghbor to let you connect for test to his antena, and better swap the dishes and you'll see how his reciver works on your's antena)

If its possible change location 1 or 2 meter and try again

Not necesarly it could also try to move it under one meter for begining for tests, and see if the signal is better

[powerman]

Re: Problem in 10892 H

some area in the roof have microwave and sometimes effective on signals i have experience about it when i change location of my dish in my roof i could take signals better

[peremacedonia]

Re: Problem in 10892 H

Waves may be very frustrating.In my work place it was car plates readers and when somebodey want to open trunk or door or to start car with remote it is inposible.Both work on same freq.and it very funny to watch from side

[Jerry2020]

Re: Problem in 10892 H

I tested the transponder on another dish on the same roof. There was a very weak signal.

[vimmers]

Re: Problem in 10892 H

have u tried to change the satellites.xml file

[Jerry2020]

Re: Problem in 10892 H

I entered the frequency directly, I even tried other receivers, but in vain.