problem with CCcam and C line from satlover.com

[roumen]

I cannot make my Dreambox DB500s to work with satlover.com free servers.
I put the row C: cccam.satlover.com 6559 BB4A9719_BD91FD4B www.satlover.com no { 0:0:3 } in CCcam.cfg file in DB500s, but before this check it in cardsharing.info to be sure it is OK.
I start the CCcam web interface and on my PC under the address 192.168.1.1:16001 I can see providers and shares I can see the big list. I also start telnet session to my dreambox and run the command cccam -dv but most of the cases I don't see information for added providers, or cards, even the web interface of CCcam is showing it. Only once I was able to see that cards were added through the telnet and cccam -dv command. But even then I see nothing on my TV.
Where might be the problem? Maybe I am doing something wrong? Shall I remove this "no { 0:0:3 } " at the end of the c line desciption in the CCcam.cfg?
The version of CCcam that I have on my DB500s is 2.2.1 and the image is Geminy 4.71.
Any help is highly appreciated!

[Zmija]

Re: Pproblem with CCcam and C line from satlover.com

After configuring your Cccam.cfg (adding the Cline), reboot your GUI.

The big list with providers is viewable with the file cccam.providers..

One notice: you could beter test your clines by using this program

http://www.satlover.com/forum/dreambox-tools/39330-new-c-n-lines-tester-new.html

[roumen]

Re: Pproblem with CCcam and C line from satlover.com

Thank you Zmija!

After changing CCcam.cfg file I was only restarting the CCcam, but not the GUI. Now I'll try with restarting the Enigma.
Thank you and for the link to the program. I'll try with it.

How is better to put a c line in CCcam.cfg:

C: cccam.satlover.com 6559 5E0D2A2B_3584000C www.satlover.com no { 0:0:3 }

or with:

C: cccam.satlover.com 6559 5E0D2A2B_3584000C www.satlover.com yes

In CCcam FAQ in this forum I saw the second way is recommended.

[microchick]

Re: Pproblem with CCcam and C line from satlover.com

You could simply create a notepad file with the extension cfg Just copy the line from the satlover and paste it in that file. Put it on a USB and then update the file on your box from the USB. The new line should be there. Select the line and then restart the box. Its done!!

[Zmija]

Re: Pproblem with CCcam and C line from satlover.com

See this post:

http://www.satlover.com/forum/cccam/4372-cccam-frequently-asked-questions.html

Post nr 4 or 5 is giving explaination what is recommend. It has to do with the hops and the shares of cards/packages..

keeping "no 0:0:3 etc. should also work

[toby69]

Re: Pproblem with CCcam and C line from satlover.com

some more info here also.

http://www.satlover.com/forum/dreambox-discussion-only/39146-how-add-cline-code-in-dm500s.html

[mirny]

Re: Pproblem with CCcam and C line from satlover.com

no and yes means that, if you want to receive emu or not

[roumen]

Re: Pproblem with CCcam and C line from satlover.com

Thank you guys!
I tried to find a working server with the program (Line Tester.exe) from Gogoli1 that Zmija pointed to me, but it seems that it is difficult to catch a working server from the Server Three list in satlover.com. I check some servers from this list with the program and it is giving me that these are Good lines, then I put these lines in the CCcam.cfg file of my box, restart it and it is not working. Then when I check again the same c lines with the program it was giving me that they are not working (are Bad lines).
I couldn't manage to see a decoded channel through card sharing with using c lines from satlover.com.

I also noticed that when I start CCcam -dv mostly the last line of it says: "no working cam devices, no need to start pmthandler". I suppose this means that the c line is not working? Only once when I started testing I saw with CCcam -dv some more rows, saying that it found irdeto caid and other rows with chid information, but maybe because I didn't know what to watch I didn't see the channels decoded and displayed on my box. You can see it from the two attachments - one is when I saw more rows, and the other is the usual way - when I don't see extra rows in CCcam -dv.
What can I do more to see where is the problem? Might it be I can not find a good c line form the list of Server Three?
Your advices are highly appreciated!

[pan1300]

Re: Pproblem with CCcam and C line from satlover.com

hi

not 100% sure, but right now the clines are already here from I think 15th May, so really overused (and well spread I fear) ; hope we'll get new free clines soon ; I suggest you wait a little bit more, and check with new clines, good possibility it'll work fine then.

[toby69]

Re: Pproblem with CCcam and C line from satlover.com

one big reason why lines are over used is they being posted over the web by traitors to this site, if you look on cline theft thread how many get reported, trouble is there is 40,000 members here and only 2 members reporting.

[pan1300]

Re: Pproblem with CCcam and C line from satlover.com

hi toby69

there you have a point.

For me personally I want to help more here, but insn't so simple (only have a client box, further real newbie on the cccam/DB/VU+ stuff, want to experience and learn more, but time (and the wife!!) is my biggest enemy here).

As test, I just gave it a ******, and after a while I found a traitor, then checked on the traitors site, and he/she was already there...

[runmo]

Re: Pproblem with CCcam and C line from satlover.com

All help is welcome all over the forum, much knowledge or less knowledge we appreciate all usefull well apreciated input from our members. I can only say continue the good work and thank you for the support. About the traitors, whenever you would find name of c-line thief, please report it with as many info as possible (name + not direct link + date of posting). Toby is right the more help for reporting the better for everyone, less overload. The free c-lines should only be used by satlover members.
Thank you again all for the help, it sure makes difference. Traitors aren't/won't stay safe!

regards
runmo

[Zmija]

Re: Pproblem with CCcam and C line from satlover.com

Yeah, I'm alsno not really enough into it like cccam.prio and cccam.providers were some new files i just learned over here. But like runmo said. Every little help to build this community further is welcome.

I'd like to learn more on this board and most of the things are too complicated for me, but I'm trying to understand it.

Ontopic I would say: yes indeed, the free lines are too overloaded, but when you keep active on this board you will get acces to more 'exclusive' lines.. As you can see on 15 usefull posts, 30 posts, 50 posts, 100 posts and so on ..

[pan1300]

Re: Pproblem with CCcam and C line from satlover.com

Ontopic I would say: yes indeed, the free lines are too overloaded, but when you keep active on this board you will get acces to more 'exclusive' lines.. As you can see on 15 usefull posts, 30 posts, 50 posts, 100 posts and so on ..

Theoretically you're right, but - again, only client box -> that could well be the problem - I really didn't see differences between the more exclusive lines of server 4 (eg 15 or 30 posts), nor between the more exclusive lines of server 3 (eg 50 or more), and I did a lot of testing a few weeks ago.

[toby69]

Re: Pproblem with CCcam and C line from satlover.com

i only have non-linux box/client only box, i found that some lines are quite good, as mentioned before lines are always better out of peak veiwing times.