Multifeed 19.2E+23.5E+28,2E+39E?

[kalpikos]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

I have a 1.20 cm motor dish set at 28E with solo2&uno so after read in your posts Multifeed is faster so I try in to setup LNB's for 13-19 4.8E and 08w use in a Camera Stand....

Dear easydigital
I think that you will have a problem if you do this.

If your dish has center 28.2E then you can put lnb to get 19E or even 13E but you will loose many, many transporters.
The signal will be very bad.

On the other hand, 0.8W can't be received in this project. Is too far.

You can use 2 diferend dishes as I said in my post above.
One for 28.2E and what other satelite you want,
and one dish for 19E, 13, 0.8W.

Also I suggest you do not use "camera stand" but a special mount for multifeeds.

Best regards

[easydigital]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

Hiya kalpikos and mirny
Thank you for your comments this is a work in progress I will report back with my findings..I do know that 28 degrees is a big distance 4 multi feed just hope they my favorites channels.

[gianni253]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

My location is central Bulgaria, with 80 cm.offset dish ,and currently I using 19+23 multifeed and working perfect.Is it possible to try to extend to 39E?For me important is 23.5E and 39E ,but I have 4 LNB and diseq 4/1 and want to include free LNB for 19 and 28E.Is anybody tried that?

My 2 cents personal report:
from Italy, covering 4 sats from 4.8E to 39.0E (34° excursion) with a Fracarro Penta 80 and a DIY bracket system: 4.8E, 13.0E, 19.2E, 39.0E (Bulsatcom)
The dish is pointed to 16°E so I think I could add some feeds up to 7.0W.
Bulsatcom F1 beam is just the same for Italy and Bulgaria, so I think you will have no problems if your target is Bulsatcom.
Your setup would be "easier" than mine.

[iliyavet]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

Hello.
I have a another question.
Please look the first picture on my post 9 here (this with my currently multifeed-from 13E till 39E)
So....i thinking to buy up to 4 more lnb to extend my multifeed.Currently my outer lnb's is left-13E and right-39E ,and I have a good signal to watch programs on them.Can be seen i have a free space to put 1 or 2 lnb's on right side between 23.5E and 39E(eventually for 28.2E,1 more lnb right to 39E-for 42E,and on left side on 13E.
The question is:Is it possible to get signal outer of my left and right lnb with my 80 cm offset dish? Is anybody made this?
Regards

[mirny]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

get multibeam dish e85, it's not too expensive


range is 48 degrees, so it is absolutelly sufficient
difference between this dish and offset dish is
that it's like you have 85cm dish on all sats.

[gianni253]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

Hello.
I have a another question.
Please look the first picture on my post 9 here (this with my currently multifeed-from 13E till 39E)
So....i thinking to buy up to 4 more lnb to extend my multifeed.Currently my outer lnb's is left-13E and right-39E ,and I have a good signal to watch programs on them.Can be seen i have a free space to put 1 or 2 lnb's on right side between 23.5E and 39E(eventually for 28.2E,1 more lnb right to 39E-for 42E,and on left side on 13E.
The question is:Is it possible to get signal outer of my left and right lnb with my 80 cm offset dish? Is anybody made this?
Regards

I think you can do it but you must optimize lnb's positioning: you have all lnbs on a straight bracket and this is not correct because they should follow a curved line (the outer, the higher)

[Satphoenix]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

...they should follow a curved line (the outer, the higher)

I agree.

My outer lnb (42°) is significant higher than the other ones. I do not believe that I receive a signal with the dish from mirni. The best solution is a holder for each lnb to adjust it for optimum.

[kalpikos]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

Dear iliyavet

I think you can easily add a lnb for 42E but no more.
The quality of your signal will be very poor.

Why you dont buy a second dish?

[zoran89]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

If he do the job good, then he should have very good signal evan on 42E
This is only 11 degrees from the centre to both side.

[kalpikos]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

If he do the job good, then he should have very good signal evan on 42E
This is only 11 degrees from the centre to both side.

I think that you have misunderstood something...

His dish is centered at 23.5E so until 42E ... (42-23.5=18.5)

18.5 cm for a 80cm dish .... I think it's a big distance

Of course he may have signal, but it will be very poor.

[zoran89]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

I know but there is no reason why he cant make 28,2E his center.

He is from BG so he will have better signal on 39E and it is more logical to make 28.2E center satellite if he want this 5 satellites.

[pat3]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

for best signal try motorized dish (about 1 second from 23 - 39 East) you gonna love it ...

[easydigital]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

28.2E is not my center point need use that for the uk spot beam, I try in to setup Multifeed LNB's for 13-19 4.8E and 08w with"camera stand"with Multifeed mounts. As you probably know this will not restrict the motorized dish movement for these satellites...

Dear easydigital
I think that you will have a problem if you do this.

If your dish has center 28.2E then you can put lnb to get 19E or even 13E but you will loose many, many transporters.
The signal will be very bad.

On the other hand, 0.8W can't be received in this project. Is too far.

You can use 2 diferend dishes as I said in my post above.
One for 28.2E and what other satelite you want,
and one dish for 19E, 13, 0.8W.

Also I suggest you do not use "camera stand" but a special mount for multifeeds.

Best regards

[zoran89]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

for best signal try motorized dish (about 1 second from 23 - 39 East) you gonna love it ...

There is absolutly no way that motor drive dish from 16 degresse in 1 sec, maybe some very fast motor can in 5sec, but most of them need abouth 10sec.

[iliyavet]

Re: Multifeed 19.2E+23.5E+28,2E+39E?

I know but there is no reason why he cant make 28,2E his center.

He is from BG so he will have better signal on 39E and it is more logical to make 28.2E center satellite if he want this 5 satellites.

Hello.This evening i will try to change my multifeed.Before do this i will ask you for advice's : Like i said my current multifeed is 13-19-23-39 =26 degrees(80 cm offset) and working well.
Yes I am from Bulgaria,thats way i want to watching max. possible Bulgarian channels . At this moment i have 4 LNB -but i want to change satellites.
I want to set 23.5E(because of satellitebg),39E(bulsatcom),45E(vivacom) and last lnb i want to put it eventually for 28E. -(23-28-39-45 = 22 degrees(I think-i can recieve better signal) (you can see my dish and lnb how is now on my post 9 here)
So...my friends how to get and will I get good signal in this future configuration with my hardware,because now on 13E my signal is poor-half of transponders i have not a signal?I think to put on center lnb for 28?
Also :what about s***ng on 45E - have ,or not?
Best Regards