Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Ariva 252 Combo problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kalpikos
    Experienced Board Member
    • Sep 2011
    • 7663

    #16
    Re: Ariva 252 Combo problem

    Hi mate

    Your receiver don't have some led that indicate that is on.
    When you turn on the box you must see after a while on display panel "Ariva tv" and other info.
    If nothing appears , your box maybe is broken.
    I suggest you don't flash it with any firmware because you will probably lost the waranty.
    It's better to contact with the store you bought it and arange a return.
    If You Like My Post..... Please Press the Thanks Button

    Comment

    • Satphoenix
      Experienced Board Member
      • Oct 2012
      • 999

      #17
      Re: Ariva 252 Combo problem

      What I meant is that if the rs232-flash tool (with nullmodem-cable!) from the ariva homepage gets connection, the electical power is ok and the failure seems to be in the firmware.
      If not, you're right and there's an electrical failure. In that case: back to the store.

      But (as far as I know) you won't loose waranty if you flash the correct official firmware from ferguson.
      If you want to make God laugh, tell him your plans!

      Comment

      • Jepi
        Newbie
        • Jun 2013
        • 3

        #18
        Re: Ariva 252 Combo problem

        Thank you all.

        The box has been sent back, hopefully it will get replaced with a "working properly" one.

        I didn't try to refresh the firmware, though. It very likely had a problem with the power supply.

        Okay then, thanks again friends!

        Comment

        Working...