Hello,
I have this hardware problem on my DM800HD.
Before starting this thread i looked for post reporting my same problem, but no result.
The problem is:
When I Switch on my DM, it happens that appear the message "Failed Sintony".
How did i Fix it? I simply move the cable to the LNB dish.
I followed lot of forum, and according to them I changed lot of parameter in DM.
I also opened the DM and changed some capacitors into the tuner. I also checked the solder near the connectors.
No result, and the problems is still present.
Some guys could say: Hey this is a little problem, just touch the cable when switching on the DM.
But with this problem I cannot set the timer.
Does sombody had experienced this problem and found the way to fix it?
I have this hardware problem on my DM800HD.
Before starting this thread i looked for post reporting my same problem, but no result.
The problem is:
When I Switch on my DM, it happens that appear the message "Failed Sintony".
How did i Fix it? I simply move the cable to the LNB dish.
I followed lot of forum, and according to them I changed lot of parameter in DM.
I also opened the DM and changed some capacitors into the tuner. I also checked the solder near the connectors.
No result, and the problems is still present.
Some guys could say: Hey this is a little problem, just touch the cable when switching on the DM.
But with this problem I cannot set the timer.
Does sombody had experienced this problem and found the way to fix it?
Comment