Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Backup Image for Vu+ Uno

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • krimozak
    Experienced Board Member
    • Mar 2010
    • 4336

    #16
    Re: Backup Image for Vu+ Uno

    BlackHole Vu+ Uno 1.6.7 beta2 backup @isayuksel


    E2_CCcam_2.3.0_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.

    CCcam.cfg file / etc folder is located under the. Server uses this knowledge to the file server need not to enter.

    CCcam 2.3.0 emu Backupda selected as active.

    CCcam.cfg enter a file server

    E2_Mgcamd_138_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.

    2.0 Manual has been established as the BTK glass. btkcam.cfg file / usr / k.eys below. Server information must be entered here. B-line are not included.

    N, O, and key update installer we also deal with the establishment of:

    Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

    Code:
    Export MALLOC_CHECK_ = 0
    ipkg install-force-overwrite / tmp / Hacksat *
    give the command.
    If the installation fails again, try to give the following command:

    Code:
    ipkg update
    Once installed, the update of k ey are doing.

    Kurulumlarımızı our config and do the other.

    If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Addons Manager> Addons Download Manager> Skins section of Black Hole E2 image can come in different skins.


    Download
    -http://www.mediafire.com/?whyy96o38bmntjy
    .
    .

    If You Like My Post... Press button sigpic to Keep it alive

    Comment

    • krimozak
      Experienced Board Member
      • Mar 2010
      • 4336

      #17
      Re: Backup Image for Vu+ Uno

      Turkuaz Team Mod BlackHole 1.7.0 Vu+ Uno


      Installation and initial settings::

      First, download the latest version of the new image for usb installing cihazımıza: (1) Vu + Duo with the image of a USB install is

      After installation to be done after the installation settings:: (2) Vu + Duo initial setup settings

      Quote:



      Seçilidi HDMI.
      1080i is selected.
      Language Turkish is selected.
      DHCP on the network.

      Where You can call this channel channel list or we can install ready. If you want to call channel tuner settings before you have to do.

      To search for detailed information about the channel: (4) Vu + Duo channel search and bookmark create

      We check the network settings using.

      Menu> Setup> System> Network section of the "Network hardware settings" kumandamızın come on "OK" button is pressed.

      Under the section for the current settings to take note of the IP address. (Channel settings will need to install me in the value of the rope.)

      If the link I gave on the network setup problem can examine this topic: Vu + wired / wireless network setup and test procedure

      Now we can install Settingimizi Channel: 4 different methods to throw the Channel List (Contacts).

      Quote:



      VU + Plus HDTV Channel Setting on the setting of the current channel is loaded.
      (December 26, 2011 4 Satellite: Turksat, Hotbird, Astra 19.2 and EutelsatW3. Hellassat In addition, Eurobird9, EutelsatW2 and Astra (Sirius) 4.8 has been added satellites. Added lists as old satellites.)
      @ Galaxy2002

      Channel setting is sure to reboot after installing the device.

      Menu> Setup> Satellite Configuration> Settings section came Tuner Tuner configuration.

      Quote:



      A tuner: (Simple) DiSEq A / B / C / D: 42 ° / 13 / ° 7 ° / 19.2 °
      Tuner B: (advanced) DisegC 1.1: 42 ° / 13 / ° 7 ° / 19.2 ° / 39 ° / 9 ° / 4.8 ° / 16 °

      Note: You will notice after installing the first channel tuner ayarlamızı have made our list. Thus, because of the possible names of different satellites, satellite broadcasts, which may be taken in setting, we have prevented errors.

      Add-on (plugin) installs are doing:

      Menu => Add-ons come to the section Kumandamızın Red button (Add-ons) is pressed. Updating the software catalog for a while after their stay at the screen a message that the system will be a list of plugins into categories. When you press the OK button on your remote control, point to the categories of any plug-ins will be listed in that category. Here you set up off olanalar ekelentilerdir installed. You want to install (or you want to remove), add-ons by checking the set up here (or remove).

      Quote:



      Add-on manager;
      PermanentClock under the System category,
      Setpasswd under the System category (the password is assigned),
      StartUpService under the System category (Channel D),
      VlcPlayer under the Software category,
      SimpleRSS under the category of Multi-media (not active),
      VirtualZap under the category of Multi-media (press and hold the arrow key),
      Multi-media category was established under the Weatheer Plugin.

      Install (or uninstall) after the end of the process to restart istemedğimiz tamamalandığı and a window will pop up on the question. "Yes" by pressing the OK button on the Kumandamızın while providing our device to restart.

      In line with our desire to do other simple config for:

      Quote:



      Menu> Setup> System> Audio / Video settings
      4:3 content is as follows: Just Scale
      > 16:9 content is as follows: Just after the green key to Scale (OK) acknowledge.
      Menu> Setup> System> Time zone: (GMT +02:00) Athens, Istanbul, Minsk
      After setting up the Green Key (OK) We acknowledge with.
      Menu> Setup> System> Customize section of the user's experience as an expert in changing the Green Key (OK) We acknowledge with.

      Determination of the initial channel:

      Quote:



      Channel List, while the point of the channel you want to begin the startup.

      Press the Menu key.

      The drop-down options, press the OK button on your remote control set-point as the stratup service.

      When you restart your device to open the channel you want.

      If you want to cancel this process so if you want the latest on what channel you turned off the opening of the channel;

      While the Channel List, press the Menu key.

      Service options in the drop-down option on startup, reset, press the OK button on your remote control to come.

      Quote:




      set as the startup service: Channel D


      We can install some plugins that are not BH Panel Addons Manager add-on manager. For this purpose;

      Press the green and yellow, respectively Kumandamızın BH Addons Manager and select the rear panel, we come back. Here, while the kumandamızın Addons Download Manager by pressing OK on the pop-up is in Chapter Black Hole Image Plugins can be loaded by pressing the OK button on the plug-ins arrive kumandamızın. While we want to establish a plug-in on this too, and then the OK button is pressed kumandamızın. Brief explanations about the plugin will display the info. Here, the green button (Download) to whether we want to do with the download and installation information about the problem buşlunduğu kumandamızın on the screen, yes, press OK to carry out the installation.


      Quote:



      DreamExplorer 7.3, Enhanced Movie Center v3.0.0, v4.2 Sherlock WebMedia was 5.0.

      As described above, you can install the Apple Trailer v1.0 addons Mangere. This extension is not Backupta. Must have on your hdd for this extension to work. During the installation of the folders is the hdd. This causes the addons panel or the / tmp directory needs to be established.

      Whenever you install plugins as external. Ipk file via ftp / tmp directory on your remote control before you roll the green, then yellow and then drop-down menu, press the "Manual Install Ipk packges" on your remote control, point to the "OK" button. You will see that you want to install the ipk file. Kumandamızın was selected even though the "OK" button you can install.

      Quote:



      turkuazpanel_0.3.5_mipsel.ipk established.

      Quote:



      Nstreamplayer was 0.3 plugin.

      Quote:



      enigma2-plugin-systemplugins-bouquetsprotection_0.1_all.ipk established

      Quote:



      ShowClock established. exit, press the key long-term.

      Quote:



      BitrateWiewer established.

      Quote:



      file was edited on nStreamPlayer. @ Dursundursun

      Quote:



      enigma2-plugin-extensions-subtitleplayer_3.10_mipsel.ipk established.

      Quote:



      r0_beta2 buyukbangpanel_1.1-founded.

      Quote:



      tunisiasat-addons-manager_3.0 was downloaded.

      Our device after restarting;

      Quote:



      Menu => Plugins => tunisiasat come first as an e-addons-manager_3.0 livefootball (3.4b), and then the plugins tunisiasat "Netradioturk_2.6-b" + "Netraditurk satation 2.7", and finally under the CCcam Info plugin V1. 3c was

      Emu are doing the installation:

      E2_CCcam_2.3.0_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.

      CCcam.cfg file / etc folder is located under the. Server uses this knowledge to the file server need not to enter.

      CCcam 2.3.0 emu Backupda selected as active.

      CCcam.cfg enter a file server

      E2_Mgcamd_138_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.

      Mgcamd_1.37_E2_bh.tgz download file such as / tmp folder, send the bottom. Black Hole in the Addons Manager (This section kumandamızın green and yellow to highlight the key is pressed), pointing to the Manual Install Bh packges kumandamızın We press the OK button. While on our file by pressing the OK button again kumandamızın and yes also on the menu, and select OK uşuna do the installation.

      2.0 Manual has been established as the BTK glass. btkcam.cfg file / usr / k.eys below. Server information must be entered here. B-line are not included.

      N, O, and key update installer we also deal with the establishment of:

      Hacksat-k e y-downloader-e2_1.1-30102010_mipsel.ipk file via ftp download / tmp folder after sending telnette;

      Code:

      Export MALLOC_CHECK_ = 0
      ipkg install-force-overwrite / tmp / Hacksat *

      give the command.
      If the installation fails again, try to give the following command:

      Code:

      ipkg update

      Once installed, the update of k ey are doing.

      Kurulumlarımızı our config and do the other.

      If you want to install the skin on your remote control before you press the green and then yellow. Black Hole Addons Manager> Addons Download Manager> Skins section of Black Hole E2 image can come in different skins.

      Quote:



      EleganceHDR_BH1.6x_VU_V2 interface is loaded. Is not active.

      I gave the following link if you want to change the threads by taking advantage of funding bootlogo and radio:

      Vu + bootlogo replacement program, use of ready-bootlogolar ...

      Quote:



      Değişrtirildi bootlogo and radio fund ...


      If you want to download picon file. Current HD Picon Turksat-W3 (Licher Pils +) Download a copy of the subject picon. Remove the folder or folders that you downloaded zipten / usr/share/enigma2 / picon folder if you have placed in the directory, or create picon folder named after the file permission 755 should be submitted within this folder.



      DOWNLOAD USB

      -http://www.mediafire.com/?4z3zr9qqn51g0gl
      .
      .

      If You Like My Post... Press button sigpic to Keep it alive

      Comment

      Working...