Has any one got this to work with VIX 2.1?
I can't change the path in Recording Paths.
Thanks.
I modded mine with two quite fans internally connected to the scart on pins 8 and 21 so the fans turn off in stand by mode.
I also took out the modem and eSATA connector and the CPU fan.
It was much cooler and quieter.
But had to remove them put a hdd in, which was a tight fit.
You could try using the scrat to control your external USB fan by cutting off the USB and wiring into the scart, but it does supply more than 5v (USB). Test carefully!
I can't change the path in Recording Paths.
Thanks.
I modded mine with two quite fans internally connected to the scart on pins 8 and 21 so the fans turn off in stand by mode.
I also took out the modem and eSATA connector and the CPU fan.
It was much cooler and quieter.
But had to remove them put a hdd in, which was a tight fit.
You could try using the scrat to control your external USB fan by cutting off the USB and wiring into the scart, but it does supply more than 5v (USB). Test carefully!
Comment