vu+ duo tools, plugins and add-ons

[runmo]

All about tools, plugins and add-ons for vu+duo can be posted here

[mikine56]

Re: vu+ duo tools, plugins and add-ons

NFI Image Unpacker nfidump

Description:

One of the waste products of the development LowFat yes, the nfidump binary.

This is a single binary with which you can unpack nfi files easy and simple without additional tools, scripts, python ...

. / nfidump imagename.nfi target directory name such command: nfidump blackhole-1.4.4-e-bm750.nfi / media / hdd / test /

In the appendix you find the appropriate IPKs for mipsel and powerpc. Please test, especially the PowerPC version, which is in mipsel LowFat been thoroughly tested.

A 64-bit Linux binary for the Linux PC I have also packed to the case who wants to test how fast one can unpack nfi image on the PC.

On the PC, but can take care of you, because if we as a directory / root and typing is also its own Linux then you overwrite and thus kill.

So always nice normal directories below the best directories where you are now entering a target (and the directory is created equal and must therefore not exist, only if there is already what it will be deleted)

The IPKs install as normal, the PC simply from the binary tar.gz hole and copy in / usr / sbin.

gracias a gutemine

[sonc]

Re: vu+ duo tools, plugins and add-ons

CoolTv Guide Version 2.2.2 by Coolman

[mikine56]

Re: vu+ duo tools, plugins and add-ons

PlanerFS 2.0
Please follow the instructions found in the next post
there are two different calendars are displayed (note the next review), eg second for service-readiness plan (Bouquet-key)
From the Start Screen only events will be displayed in the main file!

ical further additional files are displayed in the calendar (in the folder 'etc / conff' copy), but they can not be edited

christl moving. Holidays may differ from PlanerFS (optional greg. or jul.) are calculated and displayed

iCal files from PlanerFS can be edited externally with ical software

Download function, easy to upgrade an ical file in the directory PlanerFS
(eg from the internet, ****** Calendar, Network / file in a same PlanerFS directory is overwritten)

easier for import / file an appointment of additional

Language Support (. pot in locale), skinbar (already supported by several mods)

Backup / Restore iCal files and settings

My special thanks go to zombies, for the many times has he crashed with my mistakes and confirmed, without him it would have no decent
Presentation given
I am also grateful to all those I have detailed descriptions and error logs helps to find errors

[sonc]

Re: vu+ duo tools, plugins and add-ons

VU+ remote control in web interface

This is for BlackHole image, tested on BH1.4.3 and BH1.4.4.

It replaces the picture of the dreambox webremote with the correct Vu+ webremote and the correct key mappings.

You need to clear the browser cache once the file has been installed to pick up the new image.

Unzip attachment and copy .tgz file to /tmp, and install from Addons menu.

[foriyu]

Re: vu+ duo tools, plugins and add-ons

New Menu Dreambox VU+ Duo & Solo Enigma2





File Type: ipk enigma2-greek-sources-blackhole_mipsel.ipk


File Type: ipk enigma2-greek-sources-crossepg_mipsel.ipk (938 Bytes, Download



File Type: ipk enigma2-plugin-extensions-greeksub_1.0_mipsel.ipk (45.5 KB, 0




File Type: ipk enigma2-plugin-extensions-newmenu_2.0_mipsel.ipk (130.7 KB,

[sonc]

Re: vu+ duo tools, plugins and add-ons

SV********** 3.1

3.1 - Multiple choice on category save (DVBS/S2 and DVBT allowed)
- Check for DVBT Services before LCN Scan

[MIDO2010]

Re: vu+ duo tools, plugins and add-ons

DMConcinnity-HD SR-MOD
Code:

The DMConcinnity-HD Skin will installed in two versions :
- The DMConcinnity-HD Skin from Kerni as find on the OoZooN feed
- My modifications in the subdirectory /SR_mod
- installed Renderer : "DMCHDCaids.py" and "DMCHDMaxTemp.py"
- installed Converter : "DMCHDServiceInfo.py", "DMCHDSmartInfo.py", "DMCHDCaidDisplay.py" and "DMCHDCamdInfo.py"
- LCD / OLED for 800se
- Second Infobar Support
- GP3 Support (GP3 Settings on Infobar has no effekt !)
- Converter DMCHDServiceInfo.py Update !
- PlanerFS

Undepended Cryptdisplay & CamdInfo, works on Startscripts of OoZooN, Merlin-2 or GP3 !

tested on OoZooN, Merlin-2, GP3

Big Thank's to all authors of skins, converter & renderer !

work VTI 2.3 Mister-X

[lulezim]

Re: vu+ duo tools, plugins and add-ons

Backup-BKP Pappaalfio SIF 188 SVN "Avatar" con DLNA
BKP Pappaalfio SIF 188 SVN "Avatar" con DLNA

Network: 192.168.1.99 subnet 255.255.255.0 DNS already configured 
(These network parameters are for all my BKP) 
No user = root Password 
Tuner A: Hotbird-Astra Tuner B: A cascade of tuner 
Setting Vhannibal updated on January 22, 2011 
AV HDMI - Config Expert 

Installation 

Unplug all USB devices 
Flashing 
Before restarting, connect the USB devices including DTT (if compatible with the list) and any reader PCSC. 

Network configuration, the DNS are fine .. 

Install any internal HardDisk: 
TastoBlu> Disks> Partition> Mount> Verification (I left out the formatting that should be done only during the new HD) 

Create swap space (useful for backing up): 
Swap above option> Activate with red button OK 

Now configure the DTT: 
Menu '> Configuration> Channel Search> Configuration Tuner 
C tuner (if not stated is not supported) 
Select OK and the area 
The parameter has no effect on the 5V USB sticks 

With exit back to the menu and select Manual Search 
Select the Tuner C 
Search Type All transponder - Research Network is 

If you want to use the Plugin SV********** that is already installed for the first time you use an editor Setting (I use DreamBoxEdit) and downloaded from the Vudu dreamedit setting in, pass the list of land, reorder the list Vhannibal (or else you used ) in the terrestrial digital packages and ordered things going through the settings on your Vudu. 

Now you can start reading the SV********** VS. configuration, and saved. 

Press the yellow button on the site controlled the premium provider setting and if you need to update, press the download button. 
There comparirŕ the list and choose your Bouquets DTT; 
collegherŕ the plug-in automatically to the site and setting scaricherŕ new digital packages without touching the ground. 

At the end of the run command E2 plugin that allows you to avoid restarting E2. (Handy if you consider that the search for terrestrial channels do not do every day). 

A note, with the setting of Vhannibal (do not know the others), the channel numbers of DTT starts from 201 so if you want to call on 1 channel DTT (I assume you have cleared up with Rai 1, you can directly enter the channel in a mnemonic ). 

I also installed a plugin to Appendix CrossEPG, already installed in the image, which downloads the settings M7Premium than those of heaven that I've already selected in the config. 
I hope you might come in handy. 





Plugin 

Font Magnifier 
Lot Enalotto 
Filebrowser 
OscamInfo (new) 
QuickButton (to configure) 
CCcaminfo 
CronManager 
WebInterface 
PicturePlayer 
SV********** BY Dalraist 
MediaScanner 
TG24 Intercactive 
Direct Goal 12Finestre 
CrossEpg********** 
UPnP - DLNA ClientServer 

All plugins installed are working. 

I have tested and installed the DVD Player that is fine. 
Tested with media player DLNA server connected with music and AVI 

I'm already installed the drivers for the PCSC readers. 


Notes 

Original Panel Sif 
Skin concinnity HD-numbered channels. 

Panel script accessible from Sif panel where you will find all the controls installed to automatically remove the hand and some useful system commands with the addition of more new utilitŕ. 

Please note that all scripts are automatically started with the selection and therefore require no further confirmation. Special attention to scripts that begin with "Remove"! 

I installed the new plugin that will definitely come back very helpful, you will find particularly useful: Oscam.info. 
I translated all the plug-in Italian, read before you start using it (from menu option) "configuration". 


Do not perform updates online only if it is installed on a new Rel Repository

LINK USB
SIZE 55 MB
_http://www.sendspace.com/file/wtoize

LINK NFI
SIZE 55.01 MB
_http://www.sendspace.com/file/xvg2u2

[mikine56]

Re: vu+ duo tools, plugins and add-ons

Schiffe versenken

version0.2

All about tools, plugins and add-ons for vu+duo can be posted here

There is some confusion in the post

[mehdi1981]

Re: vu+ duo tools, plugins and add-ons

SV********** 3.1

3.1
- Multiple choice on category save (DVBS/S2 and DVBT allowed)
- Check for DVBT Services before LCN Scan-

[gregorii]

Re: vu+ duo tools, plugins and add-ons

Webinterface addon update

Here are the suggested minor adjustments, I also made the change in WebTV.

As usual, install the add on, clear your browsercache and eventually use ctrl-F5 to reload the page. Also use ctrl-F5 in the screen Web TV if the screen doesn't load correct.

Have fun

[mikine56]

Re: vu+ duo tools, plugins and add-ons

Vu+_Duo_Solo_Toolbox_Ver._3.1


Beschreibung:
Vu+_Duo_Solo_Toolbox_Ver._3.1
Coole Programme

ccCamToolBox
Dream_Logo_Generator
dreamset231
HP_USB_Disk_Storage_Format_Tool_modified
SettingsMaker1.1
TStoMPEG2_1.11-Beta3
VuDuo_DVB_Module_Updater
VuSettingsBackup_V13
dcce2_120
DreamBoxEdit_without_setup_3.1.0.2
dreamset231x64
Notepad 5.1.1.0
TSDoctor_Beta_Ger
VuCC_V0.2
VuPlus_Solo_DVB_Module_Updater
VuUtil
putty

DOWNLOAD

[mikelo]

Re: vu+ duo tools, plugins and add-ons

Rytec EPG providers for Enigma2
Extract and FTP to /etc

[mikine56]

Re: vu+ duo tools, plugins and add-ons

multiboot cfe v22
goodnight is my first utility in the multiboot-v22-boot-cfe for second flight is utility you will need a USB key is created 10 parity is parity among the 10 fat, fat parity must be made on the first parity, Another will be formatted with the ext3 scrypt be integrated or used my scrypt of paritionnement but is compatible only for usb 1016 cylinder, or should we put the image, and well after formatting the USB key will normally install all alone, he suffice to put an image in / media / hdd / image, has noted that for the image you must download and unzip usb image on the PC and take only the file root_cfe_auto.jffs2 and transferred into / media / hdd / image via ftp, to install the packet must be like her, and at the end reboot your demo

cd /
tar xzf /tmp/multiboot-v22-cfe.tar.gz
sleep 10
/usr/multiboot-cfe/installation-formatage-paritionnement-1016-standard.sh

attention should the USB key is mounted on pearance fat / media/sdb1 if it's not the case must credit the directory manually and installed manually but its depends on the image, I recommend putting off the image in flach, multiboot take only the core that is in parity fat, so the image will have all their independence, except that in this version I have recompiled the kernel for a witch for what is the least possible conflict, j hope that in the next release that the team intégreont the usb drivers in the kernel, as it there will be no need to tinker, I would direct their core if it starts to-day
DOWNLOAD

careful when you put an image in multiboot, verified that the image is complete, otherwise the demo will remain on the console boot, and must be removed manually or parity approx flach reboot manually with a null modem cable

readme multiboot-cfe-v2.2
back to the penultimate nucleus of the team vtie (vti-vu.gz) the image working again with this kernel
 I suprimé image gigant Percier and they are replaced by the extreme sifteam-and todo-dream