Next 2000 series overview

[>>px]

On super- yu Plusta Emu

next menu by pressing the remote control inputs We find part of the new control input section or back by pressing the red key point in asking the password, enter 1234 .Please enter the open section of the Emu cas yu
At the end of this process in this section CAS A new menu that is added.
that is added.Please enter the open section of the Emu cas yu
Then at the bottom SAVE by pressing save and exit.

[>>px]

Re: Next 2000 series overview

To go back to factory settings

the device back to factory settings if you want to master the code 1208 or 8503

[>>px]

Re: Next 2000 series overview

Illustrated Instructions for Using SpiderShare Program

Hi ,

this expression, the RS232 cable between PC and device team, pc'ninde internet connection has been described as being considered ,


SUPER SERIES
Next YE 2000 FTA USB PLUS
Next YE 2000 SUPER PLUS
Next YE 2000 SUPER X PLUS
Next YE 2000 CX SUPER PLUS
Next YE 2000 CIS SUPER PLUS
Next YE 2000 PLUS SUPER DPCIS
Next Ye 2000 hdtv

X SERIES
Next YE 2000 PLUS X
Next YE 2000 CI PLUS X
Next YE 2000 CIS PLUS X
Next YE 2500 DPCI PLUS X
INF SERIES
Next YE 2000 PLUS
Next YE 2000 CI PLUS
Next YE 2500 DPCI PLUS

narrative links
__________________________________________________ __
Downloands links
---------------
http://hotfile.com/dl/53886815/48717ca/mages.rar.html

[>>px]

Re: Next 2000 series overview

Instructions for use Sharemax Program

Dear friends ,

The following expression, RS232 cable to your device and your computer is connected to the computer that has built an internet connection is described by counting .


First , install new software on your device ,

Note : The following modular supports my alat .



SUPER SERIES
Next YE 2000 FTA USB PLUS
Next YE 2000 SUPER PLUS
Next YE 2000 SUPER X PLUS
Next YE 2000 CX SUPER PLUS
Next YE 2000 CIS SUPER PLUS
Next YE 2000 PLUS SUPER DPCIS
X SERIES
Next YE 2000 PLUS X
Next YE 2000 CI PLUS X
Next YE 2000 CIS PLUS X
Next YE 2500 DPCI PLUS X
INF SERIES
Next YE 2000 PLUS
Next YE 2000 CI PLUS
Next YE 2500 DPCI PLUS

narrative links
__________________________________________________ __
Downloands links
http://hotfile.com/dl/53889416/50c29ef/Images.rar.html

[>>px]

Re: Next 2000 series overview

Next Super Plus Software Throws :

Stblink 1.6 opens ( the device will be on standby )

Com port cable pluslarda other cable used is the same 8000-9000

Editorde com port Press the Select button on the left after comunuzu connect get the device to communicate with the editor , press

SW Down pop-up screen , press normal status After a press are you sure to continue asks yes yes Press the drop-down menu to be taken to select the software and send back finished, turn off the device has finished

narrative links
__________________________________________________ __
Downloands links
http://hotfile.com/dl/53892090/1f5737e/images.rar.html[/B]

[>>px]

Re: Next 2000 series overview

From FLASH MEMORY FOR THE NEXT SUPER PLUS SOFTWARE & KEY & CHANNEL EXPRESSION in FILES to upload

observing as I flash memory key files or installing software bilmyen a lot of my friends there , zipten files , to remove even the ever bilmiyen friends there , where I of this incident simply want to tell you , who already know it ,

this expression, you have a flash drive and plugged into the computer's USB port on your computer, WinZip or WinRAR (compression programs) that are installed can be considered are discussed .

If your device does not recognize the flash drive formatted as fat32 can create one.
IMPORTANT: The device, loaded up filaş usb memory devices do not remove , the device .

If you would like a kit during loading devices , memory chips , do not pull the plug out , the installation will continue.

narrative links
__________________________________________________ __
Downloands links
http://hotfile.com/dl/53893938/478c667/imagess.rar.html

[>>px]

Re: Next 2000 series overview

SetEdit 918 Next 2000 Super Plus Channel Editing Editor
__________________________________________________ __
Downloands links
http://hotfile.com/dl/53895618/bbfe0...it918.zip.html

[>>px]

Re: Next 2000 series overview

6014 Truman and Acamd arrows next ccam

c line regulation of expression
Open file with new text document and cardclient bottom are examples to ,
note:{(#)no} cccamn : 192.168.7.54:12000:0 / 0000/0000 : username assword
cccamn : 192.168.7.54:12000:0 / 0000/0000 : username assword

narrative links
__________________________________________________
Downloands links
http://hotfile.com/dl/53900590/c95df80/images.rar.html

[>>px]

Re: Next 2000 series overview

NEXT X PLUS SERIES SOFTWARE INSTALLATION INSTRUCTIONS Picture
Note:Have been illustrated to read the instructions before you install the software later
Note: The software is loaded on the screen before END after - OFF Remove the installation process will display OK .
Device software is not installed for a long time to pull the plug when the plug when you install new software on the screen 330 Do not worry about looks successfully loaded the software shows Tvi'ye plugging language separate Satellite election DiSEqC setting Channel And to finish scanning .

narrative links
http://hotfile.com/dl/53903892/f9bcf...t1ol3.rar.html

Please wake up to our X -series devices have four separate sections , we select the device
1 = Next YE - 2000XCI Plus / CI -entry module
2 = Next YE - 2000XCIS Plus / Embedded modules
3 = Next YE - 2000x Plus 3 = / FATA
4 = Next YE - 2500XDPCI Plus / CI -entry module

__________________________________________________
Downloands links

http://hotfile.com/dl/53903590/3b3bc..._User.zip.html

[>>px]

Re: Next 2000 series overview

NEXT YE - 2000 DOBRATECH RS232 Serial Port with Software Update

This method according to update via USB data rate due to slower .
Requirements :
RS232 serial port computer 1AD
RS232 Cross cable 1AD
Next YE - 2000 Dobratech 1AD
Programs:
STB Link 3.0
Update Software

- RS232 serial port of your computer connects to the device .
- The front-panel audio -( left ) by pressing the power plug in the device .
- the first installed on the front panel to write the bootloader version .
- The front panel DNLD WAIT ... Do not write until you pull your hands .
- STB Open Link 3.0 .
- the device you are connecting the RS232 COM port 1 ~ 4 button to select the COM tab.
- To establish a connection to the device and click CONNECT
- SW DOWN button to update your software .
- Select Boot Mode'unu .
- Select the software you want to download . ( Here loader , allinone , Apple can download files .
- The STB Link program and install the device on the front panel displays the installation process ...
- OK on the front panel of the device , STB Link program was completed in REBOOT and wait until the warning area .
- on the back of the device from the power switch off and on again.
- The software has been updated .
- Select Menu > Device Information> Device Version enter about caring . (Blank looks the Menu > Login Ayaraları > Red Key > Key in 1234 to try again.

narrative links
__________________________________________________
Downloands links
http://hotfile.com/dl/53906147/9078add/images.rar.html

[>>px]

Re: Next 2000 series overview

Next YE - 2000 DOBRATECH sharing account access via USB Cards

Next YE - 2000 satellite receiver DOBRATECH Newcamd sharing and CCcamd card systems are supported .

You can control your accounts manually install the card , such as sharing files you create can easily install it on your USB memory .
Below are examples of Softcam file .
Newcamd Accounts Login
Newcamd [ hesapno ] [ url / ip ] [ başlangıçport ] [ bitişport ] [ username] [ code] [ deskey ]
Examples :
Newcamd a user password digium.net 12 000 12 010 5 2 000 5 01 02 03 04 05 06 07 08 09 10 11 12 13 14

Sign CCcamd Accounts
cccam [ hesapno ] [ url / ip ] [Port ] 00 000 [ username] [password ] 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Examples :
cccam 2 12 000 00 000 digium.net user password 00 00 00 00 00 00 00 00 00 00 00 00 00 00

* Newcamd link is in first priority level , respectively CCcamd connections will be tried later .

[>>px]

Re: Next 2000 series overview

Next YE - 2000 DOBRATECH Channel USB to backup

USB Flash Drive you can easily get a backup of your files with the channel .

- Channel to take a backup of your control , press AV + .- Plug your USB memory device you .

- Menu > File Selector to enter the section .
- bottom right of your control you can achieve with the shortcut key .
- If you 're using multiple sources , press Command I to select the desired source .
- Channel your backup is taken .
- Remove your USB memory device by turning off your remote control , the channel has been successfully backup .
images links
__________________________________________________
Downloands links
http://hotfile.com/dl/53907203/0d72622/images.rar.html

[>>px]

Re: Next 2000 series overview

SOFTWARE 2000 SERİES

Next Super Plus 01/07/2010 Via2 Software

Hotbird absat astrada csat biss package and throw in some channels mtv open.Software emureset after the key note .
Update 1 - TP s
2 - biss emu absat and csat Added
3 -Tntsat card fix

SOFTWARE DOWNLOADS LİNKS
__________________________________

http://hotfile.com/dl/54228986/2a261ca/NEXT_YE_2000_QPlus_QNFM129.44_300610_TK0C0N0_pz.zip.html

http://hotfile.com/dl/54229116/6f21b2a/NEXT_YE-2000_CIS_SUPER_PLUS_QNEC129.44_300610_TK2C1N0_pz.zip.html

http://hotfile.com/dl/54229206/6186f22/NEXT_YE-2000_CX_SUPER_NET_QNEC129.44_300610_TK0C1N0_pz.zip.html

http://hotfile.com/dl/54229299/eac7c0e/NEXT_YE-2000_CX_SUPER_PLUS_QNEC129.44_300610_TK0C1N0_pz.zip.html

http://hotfile.com/dl/54229450/059a387/NEXT_YE-2000_DPCIS_SUPER_PLUS_QNEC129.44_300610_TK3C1N0_pz.zip.html

[>>px]

Re: Next 2000 series overview

Gbox for 2000 series .

www.dyndns.org or www no - ip.org tan .
benimdns.no - ip.org you get from , for example .
You must specify an 8 -digit password, for example, get yours 11,111,111 .
UDP port as your modem, the other is a process to open .
If you do not know how to open ports from the modem Here Select your modem , see the explanation and picture .
And disable the modem must be selected from the frewall ..
There is no need to open port USB modems you can use any port number .
You 're open for example port number is 5000 .
Gbox sharing, Sharemax program is used .
To make the necessary settings in the folder SGbox Sharemax cwshare.cfg file in the folder with the mouse right- click and select Open With from the pop-up notpad .

Notpad opens .

setting information required to be marked with the location is written.
The W line to the end of the URL, do you write the same here as local ip .
Local IP in the lower right corner of the screen , right-click the network icon from the status

Click in support comes across the screen .

We are continuing to make the settings .

As the M line in the picture below aldığınıs dns address and password that you set

For example M: { benimdns.no - ip.org { 11111111 } } We write the line .
D line, respectively, dns address of the person you share your portunuz , its ports, and sharing its code is written that the levels
For example, D : { frıends1.no - ip.org { 5000 3450 { 22,222,222 { A5 A5 } } } } We write the line

We are in Notpad save changes and exit .
According to him if we get multiple people sharing the D -line can increase the number of sub- sub- write .
We run Gboxcontrol.exe yi .

We take our dns address to match IP addresses gboxcontrol program would use a nice feature . (You do not want to use your computer, you need to install dns updater program .

If the person is online and we share in our setting is a future problem or cards .

In this way we have been involved in sharing . Our devices are connected to each other during Sharemax program . Device and the computer are connected to each other, with RS232 cable . The menu options at a special com port Gbox HSIC u keep going

HSIC in Sharemax Gbox mode must be selected .
We expect to open a channel opened . If we take a person or persons sharing the channel will open if you have the appropriate card .
__________________________________________
images links
DOWNLOADS
________________

http://hotfile.com/dl/54242238/af427f0/Desktop.rar.html

[>>px]

Re: Next 2000 series overview

THE PASSWORD AND XPLUS And Control for
Description
EXPLANATION FOR CONTROL

1 ) EMC To turn off the device and control point information , press the arrow keys on the remote then press the red button on the bottom screen will be opened in the password field . Code section with the buttons on the remote control 1234 and then type EXIT key and exit.

2 ) If the device EMC' lu is not closed , or if the pressure against the control over the menu button the following .

3 ) Menu CI point system OK press

4 ) From there , select the site you want to enter such as encryption, tps ( Multivision ) to select Viaccess section below

5 ) Again, here SERIES ID for the France 0x007c00 point line and press the arrow keys ,

6 ) We want to change the point of the line and the red ( noun) press , the following

7 ) From here , change passwords , use figures for the control EMC With the software for active channels while you are watching yellow button to enter the password screen will come directly .

images liks
DOWNLOADS
_________________________

http://hotfile.com/dl/54244088/81563f1/images.rar.html