Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Next 2000 series overview

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • >>px
    Member
    • Jun 2010
    • 77

    Next 2000 series overview

    On super- yu Plusta Emu

    next menu by pressing the remote control inputs We find part of the new control input section or back by pressing the red key point in asking the password, enter 1234 .Please enter the open section of the Emu cas yu
    At the end of this process in this section CAS A new menu that is added.
    that is added.Please enter the open section of the Emu cas yu
    Then at the bottom SAVE by pressing save and exit.
  • >>px
    Member
    • Jun 2010
    • 77

    #2
    Re: Next 2000 series overview

    To go back to factory settings

    the device back to factory settings if you want to master the code 1208 or 8503

    Comment

    • >>px
      Member
      • Jun 2010
      • 77

      #3
      Re: Next 2000 series overview

      Illustrated Instructions for Using SpiderShare Program

      Hi ,

      this expression, the RS232 cable between PC and device team, pc'ninde internet connection has been described as being considered ,


      SUPER SERIES
      Next YE 2000 FTA USB PLUS
      Next YE 2000 SUPER PLUS
      Next YE 2000 SUPER X PLUS
      Next YE 2000 CX SUPER PLUS
      Next YE 2000 CIS SUPER PLUS
      Next YE 2000 PLUS SUPER DPCIS
      Next Ye 2000 hdtv

      X SERIES
      Next YE 2000 PLUS X
      Next YE 2000 CI PLUS X
      Next YE 2000 CIS PLUS X
      Next YE 2500 DPCI PLUS X
      INF SERIES
      Next YE 2000 PLUS
      Next YE 2000 CI PLUS
      Next YE 2500 DPCI PLUS


      narrative links
      __________________________________________________ __
      Downloands links
      ---------------
      http://hotfile.com/dl/53886815/48717ca/mages.rar.html

      Comment

      • >>px
        Member
        • Jun 2010
        • 77

        #4
        Re: Next 2000 series overview

        Instructions for use Sharemax Program

        Dear friends ,

        The following expression, RS232 cable to your device and your computer is connected to the computer that has built an internet connection is described by counting .


        First , install new software on your device ,

        Note : The following modular supports my alat .



        SUPER SERIES
        Next YE 2000 FTA USB PLUS
        Next YE 2000 SUPER PLUS
        Next YE 2000 SUPER X PLUS
        Next YE 2000 CX SUPER PLUS
        Next YE 2000 CIS SUPER PLUS
        Next YE 2000 PLUS SUPER DPCIS
        X SERIES
        Next YE 2000 PLUS X
        Next YE 2000 CI PLUS X
        Next YE 2000 CIS PLUS X
        Next YE 2500 DPCI PLUS X
        INF SERIES
        Next YE 2000 PLUS
        Next YE 2000 CI PLUS
        Next YE 2500 DPCI PLUS

        narrative links

        __________________________________________________ __
        Downloands links
        http://hotfile.com/dl/53889416/50c29ef/Images.rar.html

        Comment

        • >>px
          Member
          • Jun 2010
          • 77

          #5
          Re: Next 2000 series overview

          Next Super Plus Software Throws :

          Stblink 1.6 opens ( the device will be on standby )

          Com port cable pluslarda other cable used is the same 8000-9000

          Editorde com port Press the Select button on the left after comunuzu connect get the device to communicate with the editor , press

          SW Down pop-up screen , press normal status After a press are you sure to continue asks yes yes Press the drop-down menu to be taken to select the software and send back finished, turn off the device has finished


          narrative links
          __________________________________________________ __
          Downloands links
          http://hotfile.com/dl/53892090/1f5737e/images.rar.html[/B]

          Comment

          • >>px
            Member
            • Jun 2010
            • 77

            #6
            Re: Next 2000 series overview

            From FLASH MEMORY FOR THE NEXT SUPER PLUS SOFTWARE & KEY & CHANNEL EXPRESSION in FILES to upload

            observing as I flash memory key files or installing software bilmyen a lot of my friends there , zipten files , to remove even the ever bilmiyen friends there , where I of this incident simply want to tell you , who already know it ,

            this expression, you have a flash drive and plugged into the computer's USB port on your computer, WinZip or WinRAR (compression programs) that are installed can be considered are discussed .

            If your device does not recognize the flash drive formatted as fat32 can create one.
            IMPORTANT: The device, loaded up filaş usb memory devices do not remove , the device .

            If you would like a kit during loading devices , memory chips , do not pull the plug out , the installation will continue.


            narrative links
            __________________________________________________ __
            Downloands links
            http://hotfile.com/dl/53893938/478c667/imagess.rar.html

            Comment

            • >>px
              Member
              • Jun 2010
              • 77

              #7
              Re: Next 2000 series overview

              SetEdit 918 Next 2000 Super Plus Channel Editing Editor
              __________________________________________________ __
              Downloands links
              http://hotfile.com/dl/53895618/bbfe0...it918.zip.html

              Comment

              • >>px
                Member
                • Jun 2010
                • 77

                #8
                Re: Next 2000 series overview

                6014 Truman and Acamd arrows next ccam

                c line regulation of expression
                Open file with new text document and cardclient bottom are examples to ,

                note:{(#)no} cccamn : 192.168.7.54:12000:0 / 0000/0000 : username assword
                cccamn : 192.168.7.54:12000:0 / 0000/0000 : username assword


                narrative links
                __________________________________________________
                Downloands links
                http://hotfile.com/dl/53900590/c95df80/images.rar.html

                Comment

                • >>px
                  Member
                  • Jun 2010
                  • 77

                  #9
                  Re: Next 2000 series overview

                  NEXT X PLUS SERIES SOFTWARE INSTALLATION INSTRUCTIONS Picture
                  Note:Have been illustrated to read the instructions before you install the software later
                  Note: The software is loaded on the screen before END after - OFF Remove the installation process will display OK .
                  Device software is not installed for a long time to pull the plug when the plug when you install new software on the screen 330 Do not worry about looks successfully loaded the software shows Tvi'ye plugging language separate Satellite election DiSEqC setting Channel And to finish scanning .


                  narrative links
                  http://hotfile.com/dl/53903892/f9bcf...t1ol3.rar.html


                  Please wake up to our X -series devices have four separate sections , we select the device
                  1 = Next YE - 2000XCI Plus / CI -entry module
                  2 = Next YE - 2000XCIS Plus / Embedded modules
                  3 = Next YE - 2000x Plus 3 = / FATA
                  4 = Next YE - 2500XDPCI Plus / CI -entry module


                  __________________________________________________
                  Downloands links

                  http://hotfile.com/dl/53903590/3b3bc..._User.zip.html

                  Comment

                  • >>px
                    Member
                    • Jun 2010
                    • 77

                    #10
                    Re: Next 2000 series overview

                    NEXT YE - 2000 DOBRATECH RS232 Serial Port with Software Update

                    This method according to update via USB data rate due to slower .
                    Requirements :
                    RS232 serial port computer 1AD
                    RS232 Cross cable 1AD
                    Next YE - 2000 Dobratech 1AD
                    Programs:
                    STB Link 3.0
                    Update Software

                    - RS232 serial port of your computer connects to the device .
                    - The front-panel audio -( left ) by pressing the power plug in the device .
                    - the first installed on the front panel to write the bootloader version .
                    - The front panel DNLD WAIT ... Do not write until you pull your hands .
                    - STB Open Link 3.0 .
                    - the device you are connecting the RS232 COM port 1 ~ 4 button to select the COM tab.
                    - To establish a connection to the device and click CONNECT
                    - SW DOWN button to update your software .
                    - Select Boot Mode'unu .
                    - Select the software you want to download . ( Here loader , allinone , Apple can download files .
                    - The STB Link program and install the device on the front panel displays the installation process ...
                    - OK on the front panel of the device , STB Link program was completed in REBOOT and wait until the warning area .
                    - on the back of the device from the power switch off and on again.
                    - The software has been updated .
                    - Select Menu > Device Information> Device Version enter about caring . (Blank looks the Menu > Login Ayaraları > Red Key > Key in 1234 to try again.


                    narrative links
                    __________________________________________________
                    Downloands links
                    http://hotfile.com/dl/53906147/9078add/images.rar.html

                    Comment

                    • >>px
                      Member
                      • Jun 2010
                      • 77

                      #11
                      Re: Next 2000 series overview

                      Next YE - 2000 DOBRATECH sharing account access via USB Cards

                      Next YE - 2000 satellite receiver DOBRATECH Newcamd sharing and CCcamd card systems are supported .

                      You can control your accounts manually install the card , such as sharing files you create can easily install it on your USB memory .
                      Below are examples of Softcam file .
                      Newcamd Accounts Login
                      Newcamd [ hesapno ] [ url / ip ] [ başlangıçport ] [ bitişport ] [ username] [ code] [ deskey ]
                      Examples :
                      Newcamd a user password digium.net 12 000 12 010 5 2 000 5 01 02 03 04 05 06 07 08 09 10 11 12 13 14

                      Sign CCcamd Accounts
                      cccam [ hesapno ] [ url / ip ] [Port ] 00 000 [ username] [password ] 00 00 00 00 00 00 00 00 00 00 00 00 00 00

                      Examples :
                      cccam 2 12 000 00 000 digium.net user password 00 00 00 00 00 00 00 00 00 00 00 00 00 00

                      * Newcamd link is in first priority level , respectively CCcamd connections will be tried later .

                      Comment

                      • >>px
                        Member
                        • Jun 2010
                        • 77

                        #12
                        Re: Next 2000 series overview

                        Next YE - 2000 DOBRATECH Channel USB to backup

                        USB Flash Drive you can easily get a backup of your files with the channel .

                        - Channel to take a backup of your control , press AV + .- Plug your USB memory device you .

                        - Menu > File Selector to enter the section .
                        - bottom right of your control you can achieve with the shortcut key .
                        - If you 're using multiple sources , press Command I to select the desired source .
                        - Channel your backup is taken .
                        - Remove your USB memory device by turning off your remote control , the channel has been successfully backup .

                        images links
                        __________________________________________________
                        Downloands links
                        http://hotfile.com/dl/53907203/0d72622/images.rar.html

                        Comment

                        • >>px
                          Member
                          • Jun 2010
                          • 77

                          #13
                          Re: Next 2000 series overview

                          SOFTWARE 2000 SERİES

                          Next Super Plus 01/07/2010 Via2 Software

                          Hotbird absat astrada csat biss package and throw in some channels mtv open.Software emureset after the key note .
                          Update 1 - TP s
                          2 - biss emu absat and csat Added
                          3 -Tntsat card fix


                          SOFTWARE DOWNLOADS LİNKS
                          __________________________________








                          Comment

                          • >>px
                            Member
                            • Jun 2010
                            • 77

                            #14
                            Re: Next 2000 series overview

                            Gbox for 2000 series .

                            www.dyndns.org or www no - ip.org tan .
                            benimdns.no - ip.org you get from , for example .
                            You must specify an 8 -digit password, for example, get yours 11,111,111 .
                            UDP port as your modem, the other is a process to open .
                            If you do not know how to open ports from the modem Here Select your modem , see the explanation and picture .
                            And disable the modem must be selected from the frewall ..
                            There is no need to open port USB modems you can use any port number .
                            You 're open for example port number is 5000 .
                            Gbox sharing, Sharemax program is used .
                            To make the necessary settings in the folder SGbox Sharemax cwshare.cfg file in the folder with the mouse right- click and select Open With from the pop-up notpad .

                            Notpad opens .

                            setting information required to be marked with the location is written.
                            The W line to the end of the URL, do you write the same here as local ip .
                            Local IP in the lower right corner of the screen , right-click the network icon from the status

                            Click in support comes across the screen .

                            We are continuing to make the settings .

                            As the M line in the picture below aldığınıs dns address and password that you set

                            For example M: { benimdns.no - ip.org { 11111111 } } We write the line .
                            D line, respectively, dns address of the person you share your portunuz , its ports, and sharing its code is written that the levels
                            For example, D : { frıends1.no - ip.org { 5000 3450 { 22,222,222 { A5 A5 } } } } We write the line

                            We are in Notpad save changes and exit .
                            According to him if we get multiple people sharing the D -line can increase the number of sub- sub- write .
                            We run Gboxcontrol.exe yi .

                            We take our dns address to match IP addresses gboxcontrol program would use a nice feature . (You do not want to use your computer, you need to install dns updater program .

                            If the person is online and we share in our setting is a future problem or cards .

                            In this way we have been involved in sharing . Our devices are connected to each other during Sharemax program . Device and the computer are connected to each other, with RS232 cable . The menu options at a special com port Gbox HSIC u keep going

                            HSIC in Sharemax Gbox mode must be selected .
                            We expect to open a channel opened . If we take a person or persons sharing the channel will open if you have the appropriate card .

                            __________________________________________
                            images links
                            DOWNLOADS

                            ________________

                            Comment

                            • >>px
                              Member
                              • Jun 2010
                              • 77

                              #15
                              Re: Next 2000 series overview

                              THE PASSWORD AND XPLUS And Control for
                              Description
                              EXPLANATION FOR CONTROL


                              1 ) EMC To turn off the device and control point information , press the arrow keys on the remote then press the red button on the bottom screen will be opened in the password field . Code section with the buttons on the remote control 1234 and then type EXIT key and exit.

                              2 ) If the device EMC' lu is not closed , or if the pressure against the control over the menu button the following .

                              3 ) Menu CI point system OK press

                              4 ) From there , select the site you want to enter such as encryption, tps ( Multivision ) to select Viaccess section below

                              5 ) Again, here SERIES ID for the France 0x007c00 point line and press the arrow keys ,

                              6 ) We want to change the point of the line and the red ( noun) press , the following

                              7 ) From here , change passwords , use figures for the control EMC With the software for active channels while you are watching yellow button to enter the password screen will come directly .


                              images liks
                              DOWNLOADS

                              _________________________

                              Comment

                              Working...