spiderbox 7000

[cammy72]

hi

just got a spiderbox 7000 , can someone please point me in the direction of a tutorial too add a cline into it , i know you can do it through usb but what should the cfg file look like ?

i have been using dreambox for a while , you just upload it through ftp
is the spiderbox a lot harder to work with?

thanks for your time
Andy

[cannydo]

Re: spiderbox 7000

Have a read here m8 http://www.satlover.com/forum/card-s...ight=spiderbox

[toby69]

Re: spiderbox 7000

welcome to the site cammy72, cannydo (hi canny) has pointed you in the right direction, if you do a bit of searching throu the english section (threads) you will find a lot of help for spiderbox as there was a mass exodous a short while ago of spiderbox users, i myself still use what you using.
good luck
toby69

[cammy72]

Re: spiderbox 7000

thanks mate , got it connected but now it doesn't show hd channels without a "scrambled" message coming up on the screen.
you might get a minute or so then it sort os freezes and comes up with "scrambled channel"
any ideas mate

Andy

[toby69]

Re: spiderbox 7000

is that with the free lines here, check free servers page, if you do little more posting get better lines.

[cammy72]

Re: spiderbox 7000

the line i get is a paid for line , has been good on dreambox for about a yr now mate , done a sw update and cant get the hidden menu to come back on the network menu , can see me going back to dreambox

[digicon]

Re: spiderbox 7000

Probably the first thing to look at is the firmware as i saw a release for the 7000,9000,9900 from the 29/03/2010 so that would be my first mission to upgrade the firmware to see of it makes the Cams more stable.

Also i believe that Newcamd is a lot more stable on the spider than what Cccam is, That could also be worth a try.

[cammy72]

Re: spiderbox 7000

done the upgrade but i think i have deleted all the settings from the box now
can anyone point me in the direction of a tutorial to set it up from scratch (new cccam) or just point me towards the bin!!

Andy

[redhezuk]

Re: spiderbox 7000

the line i get is a paid for line , has been good on dreambox for about a yr now mate , done a sw update and cant get the hidden menu to come back on the network menu , can see me going back to dreambox

I assume you are trying 1111 in the network menu to get the hidden menu. If that isn't working then flash back to a previous version of the software. I've not heard of anyone else having this problem though? Let us know how you get on as we are here to help where we can :-)

The only real difference you should notice between the dreambox and spiderbox is the lack of control over the elements withing the {} i.e. limiting the number of hops. Other than that if the provider is good on your dreambox it should work the same on the spiderbox. There is a perception that Newcamd is better than cccam on the spiderbox but I don't necessarily agree with this as it really depends on the quality of the provider. I've had great cccam lines that work better than some newcamd lines. Although my main provider is newcamd at present and generally works great!

[toby69]

Re: spiderbox 7000

simply box spider is, when you say deleted all settings, do not do factory reset.

[redhezuk]

Re: spiderbox 7000

done the upgrade but i think i have deleted all the settings from the box now
can anyone point me in the direction of a tutorial to set it up from scratch (new cccam) or just point me towards the bin!!

Andy

If you do a factory reset you delete all your settings. You have to ensure you backup all your settings before doing a factory reset. This is done by pressing the green button in the usb menu to back up your channel list.

If you have lost everything without a backup then I would suggest you download Billybits latest channel list see the Spiderbox HD Upgrade thread:

http://www.satlover.com/forum/208358-post148.html

Then download the latest patch

Then do the following

1,menu network turn back on ,press 1111 to expand other options.
2,load the Billybits channel data back on enter your long/latitude if using USALS (you do this by entering the usb menu and selecting the unzipped channel list from your usb drive/stick).
3,goto key edit turn ucas back on.
4,load softcam (you do this by going into the usb menu and selecting the softcam file from your usb drive/stick).

The latest softcam is located here:

http://www.satlover.com/forum/210445-post152.html

To then enter your cline do the following:

a. go to network and switch ethernet off if it is on.
b. Open client set up type CCCAM
c. Input the ip address from test line
d. Input port number
e. ID from test line
f. password from test line
g. apply

When viewing a channel press info twice and it will tell you which line connects.

Let us know how you get on after that.

[cammy72]

Re: spiderbox 7000

everytime i try and open the extended menu by pressing 1111 it does nothing mate

[sataday]

Re: spiderbox 7000

Just to clarify one point on the above.
Load latest patch and then factory reset again before loading channel list.

[toby69]

Re: spiderbox 7000

so when you press menu, network, turn on, then press 1111, nothing happens, sounds like you need to load latest firmwareHD patches March 2012

- Digiturk 7.0E CCcam ID corrected.
- Easier to set up a recording manually as now you can choose from your favourites rather than having to select a channel from the full channel list.

Usual update process applies:

1,back up channel data udb only[menu/usb green button].
2,factory reset.
3,load todays patch S/W only.
4,factory reset.
5,menu network turn back on ,press 1111 to expand other options.
6,load your channel data back on enter your long/latitude if needed.
7,goto key edit turn ucas back on.
8,load softcam.

Download Links:

7000 - _http://www.sendspace.com/file/zoo3d6

[cammy72]

Re: spiderbox 7000

so when you press menu, network, turn on, then press 1111, nothing happens, sounds like you need to load latest firmwareHD patches March 2012

- Digiturk 7.0E CCcam ID corrected.
- Easier to set up a recording manually as now you can choose from your favourites rather than having to select a channel from the full channel list.

Usual update process applies:

1,back up channel data udb only[menu/usb green button].
2,factory reset.
3,load todays patch S/W only.
4,factory reset.
5,menu network turn back on ,press 1111 to expand other options.
6,load your channel data back on enter your long/latitude if needed.
7,goto key edit turn ucas back on.
8,load softcam.

Download Links:

7000 - _http://www.sendspace.com/file/zoo3d6

thanks mate , thats got the extended menu back , now if you have time could you post or point me in the direction of what i need for 28.2 set up on a c-line...so i dont make a @rse of it again

thanks very much for the help so far guys

If you do a factory reset you delete all your settings. You have to ensure you backup all your settings before doing a factory reset. This is done by pressing the green button in the usb menu to back up your channel list.

If you have lost everything without a backup then I would suggest you download Billybits latest channel list see the Spiderbox HD Upgrade thread:

http://www.satlover.com/forum/208358-post148.html

Then download the latest patch

Then do the following

1,menu network turn back on ,press 1111 to expand other options.
2,load the Billybits channel data back on enter your long/latitude if using USALS (you do this by entering the usb menu and selecting the unzipped channel list from your usb drive/stick).
3,goto key edit turn ucas back on.
4,load softcam (you do this by going into the usb menu and selecting the softcam file from your usb drive/stick).

The latest softcam is located here:

http://www.satlover.com/forum/210445-post152.html

To then enter your cline do the following:

a. go to network and switch ethernet off if it is on.
b. Open client set up type CCCAM
c. Input the ip address from test line
d. Input port number
e. ID from test line
f. password from test line
g. apply

When viewing a channel press info twice and it will tell you which line connects.

Let us know how you get on after that.

done this mate but it still wont open channels , didnt use billys channel list as it was for a motorised system and my dish is just fixed to 28.2 with a c-line.
would i need to install cccam2.1.2 again or anything like that after i reset all settings ? my c-line is still showing but i cant get any channels to open up . i can get bbc and itv channels but nothing else

also when i press info twice it doesn't show what line its connecting through , something not quite right just yet