Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Lnb

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nanor01
    Member
    • Sep 2010
    • 68

    Lnb

    hi I changed my LNB and find that certain frequencies on some satellites variate a lot from full signal to none at all and signal continually fluctuates and yet if I put original lnb back on dish this doesn't happen
    Can anyone help or has anyone any ideas?
  • mahrkpat
    Experienced Board Member
    • Jun 2012
    • 1493

    #2
    Re: Lnb

    Does the LNB sit in exactly the same as the old one if not the focus point of the new LNB
    might be different a little adjusting might be in order also make sure your connection when
    you connect to the new LNB are fitting properly.
    Liked my post then push the sigpic button.

    Comment

    • bakfitty
      Senior Member
      • May 2013
      • 145

      #3
      Re: Lnb

      Originally posted by nanor01
      hi I changed my LNB and find that certain frequencies on some satellites variate a lot from full signal to none at all and signal continually fluctuates and yet if I put original lnb back on dish this doesn't happen
      Can anyone help or has anyone any ideas?
      Maybe the new lnb is faulty or it is a bad quality lnb. A lot depends on the brand of the lnb.

      If my post was useful to you, please push 'thanks' button.

      Comment

      • Satphoenix
        Experienced Board Member
        • Oct 2012
        • 999

        #4
        Re: Lnb

        Originally posted by nanor01
        ...if I put original lnb back on dish this doesn't happen
        ...
        Try it again with your lnb-change.
        If it happens again it sounds like a lnb-failure.
        If possible, send it back to change or money back.
        If you want to make God laugh, tell him your plans!

        Comment

        • Mobley3
          Experienced Board Member
          • Jun 2012
          • 722

          #5
          Re: Lnb

          Originally posted by nanor01
          hi I changed my LNB and find that certain frequencies on some satellites variate a lot from full signal to none at all and signal continually fluctuates and yet if I put original lnb back on dish this doesn't happen
          Can anyone help or has anyone any ideas?
          You need to spend some time focusing the new Lnb. Move it in as far as you can in the mount and check the Quality, then move it out as far as possible and check again, you may find a position in between is the best, also all tests should be done with the Lnb straight up ie. no offset, what Lnb did you buy and what one were you replacing?. you should also make sure that there are no loose strands of braid which could cause a problem.

          Regards Mobley3


          mobley3

          Comment

          • herrr
            Experienced Board Member
            • Jan 2012
            • 1080

            #6
            Re: Lnb

            Did you try to adjust the skew, turning LNB in a proper way?

            Comment

            • kontoni
              Senior Member
              • Aug 2012
              • 152

              #7
              Re: Lnb

              sounds like lnb problem

              if everything works ok with original and not with new probably something is wrong with it.

              Comment

              • gianni253
                Experienced Board Member
                • Nov 2012
                • 903

                #8
                Re: Lnb

                Faulty lnb.
                No doubt.

                Comment

                • easydigital
                  Board Senior Member
                  • Nov 2010
                  • 289

                  #9
                  Re: Lnb

                  A cheap Satfinder meter is more useful but it simply looks at the average strength of all frequencies. It will not tell you if some frequencies are missing. An expensive meter looks at a specific frequency (sometimes more than one) but it will not tell you if some frequencies are missing.

                  Originally posted by nanor01
                  hi I changed my LNB and find that certain frequencies on some satellites variate a lot from full signal to none at all and signal continually fluctuates and yet if I put original lnb back on dish this doesn't happen
                  Can anyone help or has anyone any ideas?
                  helped use "Thanks"

                  Comment

                  • mahrkpat
                    Experienced Board Member
                    • Jun 2012
                    • 1493

                    #10
                    Re: Lnb

                    To all those saying bad LNB I like to say it is not always a hardware problem as me and
                    others have advised the LNB might need adjusting especially if the new one is from a
                    different maker, up to the OP now to tells us which advice is best.
                    Liked my post then push the sigpic button.

                    Comment

                    • Mobley3
                      Experienced Board Member
                      • Jun 2012
                      • 722

                      #11
                      Re: Lnb

                      Originally posted by herrr
                      Did you try to adjust the skew, turning LNB in a proper way?
                      If it is a Motorized Dish there should not be any need for Skew as it is done by the Motor as it turns.

                      Regards Mobley3


                      mobley3

                      Comment

                      • thecrazybandit
                        Experienced Board Member
                        • Jul 2012
                        • 768

                        #12
                        Re: Lnb

                        I normally just centre the lnb up and try small movements each way to get the strongest signal

                        Comment

                        • findeciclo
                          Experienced Board Member
                          • Oct 2010
                          • 1412

                          #13
                          Re: Lnb

                          Probably your new LNB have a signal/noise ratio worst than your old LNB.
                          Or maybe defective or damaged, if you have bought it go to your dealer and tell him your problem. Inverto lnb's are the best, high quality and not so much expensive.
                          Best regards.
                          __________________________________________________
                          sigpic

                          Comment

                          • gianni253
                            Experienced Board Member
                            • Nov 2012
                            • 903

                            #14
                            Re: Lnb

                            Originally posted by nanor01
                            ..... and signal continually fluctuates ...
                            IMHO this symptom that has been reported has nothing to do with a wrong setup/positioning of the lnb

                            Comment

                            • ishtiaq_sb
                              Member
                              • Jul 2013
                              • 44

                              #15
                              Re: Lnb

                              the problem is not in the lnb because when new lnb come in the market it is better than the old one but I think he has loose his dish setting and he is required more labour and time to spent on thisalso cheek u r connctors of dvb and lnb

                              Comment

                              Working...