Upload Speeds

[odysseas1991]

Quick question, what is the minimum required upload speed to run a c line without affecting it by freezing and stuttering? I have a speed of 0.33kb upload and 6mb download but find that no matter what server from any site I use, even in the most off peak hours, I can not recieve a channel which lasts for more than 2-3 minutes without stopping or freezing. Is this just the server (becuase it is free) or my upload and download speed? For example, it will decrypt the channel for about 1 minute on average, then go black and say scrambled channel...What causes the stopping on the decryption and what are the average speeds everyone has?

[zoran89]

Re: Upload Speeds

It is enought these 0,33kb, to you what matter is ping.

[skytec]

Re: Upload Speeds

.... I have a speed of 0.33kb upload and 6mb download .....

Are you sure ??
I would say more like 330 KB and it is perfectly acceptable ...

[odysseas1991]

Re: Upload Speeds

Yes skytec, you are correct, it was meant to be 0.33mb... So it seems that its the server then that gives poor channel quality. Zoran89, my ping is 25ms which I think is quite good, so it seems its the server. Do you know if the server 1,2 and 4 run smoothly without skipping or freezing, because I dont seem to have found a single server on the internet that runs smoothly for more than 2 minutes...It seems I am going to buy the premium server soon...

[vimmers]

Re: Upload Speeds

the higher u come in postcount the free server runs more smoothly

[ivorbegun]

Re: Upload Speeds

could also be version of cam i can get a lot less freezing on older versions of cccam my box doesn't like 220 and 221 but 211-214 run fine

[odysseas1991]

Re: Upload Speeds

Thats my problem, my TM box has all the CCCAM built in so all I do is press IP or 8280 and go from there. Iv come to the conclusion from testing that it is just the different servers, it seems that the satlover server 3 does something somehow more than other servers do to trigger off the crash, never mind it is only for testing purposes.

[ivorbegun]

Re: Upload Speeds

i know that there is a phantom patch for this model not sure if it updates the cccam as i have the 600
have you tried a newcamd server on it to see if it is the cam

[odysseas1991]

Re: Upload Speeds

This is what im not sure about... Can you explain to me what the difference between the CAM and CCCAM is and why it would change freezing? Im new to this cardsharing business and Im trying to pick up and learn the technicalities. I did notice that a newcam specifies a certain port to certain package but im still not sure what the difference really is...

[ivorbegun]

Re: Upload Speeds

they are 2 different protocols its worth trying a newcamd server from the freeservers on other sites bit of the fourm if it works ok its not your internet connection or the box dont crash

[ivorbegun]

Re: Upload Speeds

there is a new patch for your model i will pm u the dl site if you need it

[odysseas1991]

Re: Upload Speeds

Ok, I will try it, are the newcamd's more stable servers and have less freezing or react the same like a CCCAM depending on server traffic? And thank you for the link to the patch, I will update it now!

[ivorbegun]

Re: Upload Speeds

they are the same in with stability but if you got a problem with cccam on the box it might be better to use newcamd untill you find a faster server (50 posts on here im led to belive gets you a better server) im sorry i dont have a local card for you to test but you could always ask in ccam exchange servers

[kursum1]

Re: Upload Speeds

the free servers are usually overloaded. too many people are connecting to them, even if you have low ping to the server, there will be freezing on the channels.
maybe the servers here that require bigger post count are better, since fewer people will connect to them.

[odysseas1991]

Re: Upload Speeds

Ivorbegun, iv just tested various newcamd's and although the channels run more smoothly than CCCAM's the box still crashes sometimes when changing between channels so to me it seems like its an error in my box. The crashing happens less though depending on which server, which is the only variable that I think makes me think it might be a busy server, other than that, I give up on trying to find a solution.

Kursum, I have tried many different servers, even when the port numbers are updated in various times, even in the middle of the night where there can surely be not alot of people online to overload it. But yes, your right in the crashing is reduced on more stable servers.