Openbox S10HD

[mrfarnhigh]

Re: Openbox S10HD

can't set up a smart card any ideas?

[autO0]

Re: Openbox S10HD

Yesterday I paste cline in notepad and save a file name ccam.cfg.
Update from usb & manage..
It is showing some server. I have connect one it was offline..
Now connect 2nd server than my box on & feeze no display on tv... for 2-3 min..
After than we do power off of box and restart . But box not show power on ( No power led nither signal led , No display no picture on tv..

What is is this..
Pl. confirm.

[pan1300]

Re: Openbox S10HD

hi autO0

first of all: never use more than 1 cline from the same satlover server at the same time (forum rule to avoid ban)!
If you have more usefull posts, you'll get access to better clines and servers.

second: although I don't know this box, but isn't there some kind of recovery tool or procedure (often with serial RS232 nullmodem cable)? Best to give it a search here or on the internet if you don't find something ...

[mahrkpat]

Re: Openbox S10HD

Please go to this for what to do:

http://www.satlover.eu/forum/openbox-hd/45224-how-to-recover-a-dead-openbox-skybox.html

You will also need firware go here:

http://www.satlover.eu/forum/openbox-hd/36023-openbox-sw-emu-firm.html

Another tip when you create Cccam.cfg using notepad then remember to use
the all files option when saving if you don't do this you will end up with a .txt file
(eg Cccam.cfg.txt) instead of a .cfg file.

Good Luck.

[KVF1966]

Re: Openbox S10HD

Hi autO0.
The first time you try to use cline from the server http://www.satlover.eu or before they took cline from other servers, not http://www.satlover.eu and if you had everything you worked without freezing?

[autO0]

Re: Openbox S10HD

I choose recovery from RS232 Null Modem Cable.. But It is showing error" Set Stb Memory error". Click back to try again..
Even my Dump also not installing..
Any idea....?

[KVF1966]

Re: Openbox S10HD

And you can scan any transporder with FTA channels, your receiver plays, but probably in your tuner problem with flash memory and here will help restore the JTAG.

[autO0]

Re: Openbox S10HD

Thanks info..
But There are no any Jtag in Openbox s10..
There no power led and and signal led Blink. No Display on board also..
I tried many firmware but nothing happened..

[mahrkpat]

Re: Openbox S10HD

I choose recovery from RS232 Null Modem Cable.. But It is showing error" Set Stb Memory error". Click back to try again..
Even my Dump also not installing..
Any idea....?

You get the " Set Stb Memory error" when your pc can't communicate with the
stb (set top box).

Are you following the steps correctly?
Are you sure you are using a Null Modem Cable and not just a serial cable?
Are you using proper com port or are you using the usb to RS2332 adapter?
If you use usb to RS2332 adapter then sometimes you have to time the switch
on of your box at different intervals before it is recognised after you get
the message, "Snychronising STB" "Please reset target"

[autO0]

Re: Openbox S10HD

COM PORT-1 IS CONNECT AS SHOW IN DEVICE MANAGER..
CONNECT RS232 SR CABLE..
FIRST MESSAGE :Snychronising STB" "Please reset target"
THAN SECOND MESSAGE: Set Stb Memory error , CLICK BACK AND TRY AGAIN..
RS232- FEMALE TO FEMALE CONNECTOR..

[pan1300]

Re: Openbox S10HD

hi autO0

some tips (learned it the hard way after days of misery and googling ...):
- as mahrkpat said: try to avoid usb to serial adapter
- make sure you have a crossed cable (handshake can help, but is normally not necessary)
- if possible: check or try to know the speed of the com-port of your box (sometimes is written down in the manual - specs) and set this same speed in your pc-laptop

It's good possible you need to try over and over again ; also the moment of switching the receiver on can be important.

Good luck!

[mahrkpat]

Re: Openbox S10HD

COM PORT-1 IS CONNECT AS SHOW IN DEVICE MANAGER..
CONNECT RS232 SR CABLE..
FIRST MESSAGE :Snychronising STB" "Please reset target"
THAN SECOND MESSAGE: Set Stb Memory error , CLICK BACK AND TRY AGAIN..
RS232- FEMALE TO FEMALE CONNECTOR..

If everything is correct with set up have you ticked on include boot loader after
you have navigated to your firmware here is a pdf showing it I had to zip it.

[autO0]

Re: Openbox S10HD

Many -Many Thanks to all of you..

I Will confirm soon as receive good result..

[mahrkpat]

Re: Openbox S10HD

Good luck autO0 and a couple of tips for the future backup your settings and
if firmware works leave it alone (don't fix what is not broken) and lastly install
stb lan tool for the openbox makes it easier to update channel lists and clines.

[autO0]

Re: Openbox S10HD

Successfully Upgrade software but no Power display..
I have checked power supply, It is ok from power board to mother board & display board..
But no any Display on the board..

I this there is a some big problem ..

It is in warranty conditions.So I am making a plan to send this back to Shipper..

What you think..
Pl. give me some idea for Full flash Powerful STB Box..

Thanks