Enigma 2 will be the new Azbox firmware (only info here no files)

[ZoxPa]

Re: Enigma 2 will be the new Azbox firmware

Yes I now that facts, i have one Azbox Elite, and I use all that features (DVB-T,1080p,4:2:2,multimedia center., *******), but price in my country is 320€ and that is not small price for as.

[satman72]

Re: Enigma 2 will be the new Azbox firmware

Yes I now that facts, i have one Azbox Elite, and I use all that features (DVB-T,1080p,4:2:2,multimedia center., *******), but price in my country is 320€ and that is not small price for as.

I think this is price for Premium+, here in Italy prices are 230 euros for Elite and 330 euros for Premium+ model.

[grindus]

Re: AzBox © Firmware

CCcam and Mgcamd for Azbox the plugin can start / stop / restart / cam info / autostart / desable autostart

Installation
Can manually via telnet but also with management software>> Install local extensions>> Internal flash
Copy one by one file in / (that is the root of the image) to say totalcommander
Upon installation, delete files or install in the order written down
and then delete one by one.

The order of installation

1.enigma2-plugin-extensions-userscripts_2.4-r4_mipsel.ipk
2.enigma2-plugin-CAMD-mgcamd.1.35a_2.4-r1_mipsel.ipk
3.enigma2-plugin-CAMD-cccam.2.1.4_2.4-r0_mipsel.ipk
4.napravi folder / var / etc for your CCcam files

Restart box

5.Otidji the Main menu Plugins-User Scripts User-execute script from / usr / script
there can do anything for the emu
start / stop / restart / cam info / autostart / desable autostart

For Mgcamd course should you put in your config files if you use to CCcam gbox or CS in / var / keys

6.A this is very important to put the emu radio mg_cfg for AzBox with everything needed for CCcam Gbox or configuration

# Box type
# 00 Autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox / mips
# 08 entered / kathrein
# 09 entered / ipbox
# 11 entered / openbox
B: {06}

So you have to make any necessary changes to your way of use in all files for Mgcamd 1.35
It seems to me that Mgcamd now works better than the AzBox CCcam but it takes longer to test.

[satman72]

Re: Enigma 2 will be the new Azbox firmware

Enigma 2 1.0.25 by The_Ripper & Team
ONLY FOR ELITE AND PREMIUM


What is new?

fixed HD channels
CA added

Before to load E2 point the dish on desidered sat, it don't manage motors and switch.
If you've old E2 installed before to load this version load back any original firmware.
If You have Full HD TV , You can set resolution by editing bootup file located in :

/etc/init.d

Find line :

# Elite and Premium

below You will see line insmode ...

and replace existing insmode line with this one :



insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip SiI9030 0 14 15 100 0"

Wireless for Premium and Premium+

Download archive attached to my post, unzip it, and transfer whole folder wlan by FTP to /tmp folder on Your receiver

Connect to Your receiver by telnet and execute this commands :

mkdir -p /etc/Wireless/RT61STA

cd /tmp

cp /tmp/wlan/rt2561.bin /etc/Wireless/RT61STA/

cp /tmp/wlan/rt2561s.bin /etc/Wireless/RT61STA/

cp /tmp/wlan/rt2661.bin /etc/Wireless/RT61STA/

cp /tmp/wlan/rt61sta.dat /etc/Wireless/RT61STA/rt61sta.dat

dos2unix /etc/Wireless/RT61STA/rt61sta.dat

cd /lib/modules/2.6.22.19-19-the_ripper/kernel/

mkdir drivers

cd drivers

mkdir net

cd net

mkdir wireless

cp /tmp/wlan/rt61.ko /lib/modules/2.6.22.19-19-the_ripper/kernel/drivers/net/wireless

insmod rt61.ko

cd /tmp

wget http://oozoon-dreamboxupdate.de/open...-r5_mipsel.ipk

ipkg install wireless-tools_29-r5_mipsel.ipk ( If error appear dont worry )

ifconfig ra0 192.168.1.22 up ( my gateway is 192.168.1.1, so i put ifconfig ra0 192.168.1.22 up )

iwlist ra0 scanning ( this will list available networks in your range )

output will be something like this :

root@AZBox:/tmp# iwlist ra0 scanning
ra0 Scan completed :
Cell 01 - Address: 00:0C:21:16D:2A
Mode:Managed ESSID:"HomeLan"
Channel:6
Encryption keyn
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 6 Mb/s; 9 Mb/s
11 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s
Quality:82/100 Signal level:-57 dBm Noise level:-111 dBm
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
iwconfig ra0 essid HomeLan

iwconfig ra0 mode Managed

iwconfig ra0 channel 6 ( as my network broadcast on channel 6, in Your case choose what is appropriate for Your network ).

iwconfig ra0 key s:mywpakey (mywpakey will be your network key ).


Result is when i ping it from my pc :

MickeySa:~ mickey$ ping 192.168.1.22
PING 192.168.1.22 (192.168.1.22): 56 data bytes
64 bytes from 192.168.1.22: icmp_seq=0 ttl=64 time=5.569 ms
64 bytes from 192.168.1.22: icmp_seq=1 ttl=64 time=3.591 ms
64 bytes from 192.168.1.22: icmp_seq=2 ttl=64 time=1.501 ms
64 bytes from 192.168.1.22: icmp_seq=3 ttl=64 time=1.637 ms
64 bytes from 192.168.1.22: icmp_seq=4 ttl=64 time=1.649 ms
64 bytes from 192.168.1.22: icmp_seq=5 ttl=64 time=1.738 ms
64 bytes from 192.168.1.22: icmp_seq=6 ttl=64 time=1.533 ms
64 bytes from 192.168.1.22: icmp_seq=7 ttl=64 time=1.795 ms
64 bytes from 192.168.1.22: icmp_seq=8 ttl=64 time=1.754 ms
64 bytes from 192.168.1.22: icmp_seq=9 ttl=64 time=1.649 ms

I DONT SUGGEST TO LOAD THIS FIRMWARE IF YOU'RE NOT ABLE TO BUILD A SERIAL INTERFACE TO RESTORE YOUR BOX IN CASE YOUR FLASH WILL FAIL!
SO DON'T ASK TO ME HELP THEN! IF YOU LOAD THIS FW YOU DO IT UNDER YOUR RESPONSABILITY


I've removed there is new version look down!

[ZoxPa]

Re: Enigma 2 will be the new Azbox firmware

Here you can find files for E2 for Azbox:
_http://www.azbox-enigma.eu/

[satman72]

Re: Enigma 2 will be the new Azbox firmware

Dear friends,

Enigma v1.0.26 by the_ripper and team

What is new :

DiseQc FIX ( 1.0 , 1.1 , 1.2 manual and USALS )

DVB-S2 FIX

Integrated BlackShadow2 Skin from Matrix10 ( thanks to Matrix10 ).

WARNING USE AZUP 1.1 ENCLOSED INTO THIS VERSION NOT THE PREVIOUS!

_http://www.azbox-enigma.eu/upload/E2_AZBox_1.0.26.rar

[MIDO2010]

Re: Enigma 2 will be the new Azbox firmware

Enigma 2 v1.0.27

Devices suitable for flashing : Elite and Premium

What is new :

- DiseQc FIX ( 1.0 , 1.1 , 1.2 Manual and USALS too )

- DVB-S2 FIX

- Integrated BlackShadow2 skin by Matrix10

- Fixed boot error

Download

http://www.azbox-enigma.eu/upload/E2_AZBox_1.0.27.rar

[bledi07]

Re: Enigma 2 will be the new Azbox firmware

Things are looking really good for Azbox HD owners. Well done to the team that is working for Enigma2 for Azbox receiver.

[satman72]

Re: Enigma 2 will be the new Azbox firmware

Annunced for tonight another Enigma 2 release those are news:

Thanks to the sattomy, now MKV is running perfectly, without any problems.

DTS over HDMI also work perfect.

Terminator salvation 1080p.mkv

Titles from MKV, also OK.

MickeySa

What is new :

- Fix for no signal on DVB-S2 tuner for some users

- Multimedia fix for various formats by sattomy


Stay tuned.