Tweet
GUIDE TO MOTORISED DISH SETUP DM800 TUNER FOR USALS
Image Used -Blackhole V0.12
If your using DiSEqC 1.2 you will have to set-up the dish positions manually. If your using USALS it should be automatic.
Here's the USALS procedure that I used.
First make sure the dish is correctly aligned on a satellite, eg Astra 28.2E
Press Menu
Set Up
goto
Service Searching
Tuner Configuration
Choose Tuner ALPS BSBE2 (DVB-S2) - Press OK
Now for my configuration***8230;***8230;..
Configuration Mode: Advanced
Satellite : Astra 2A/2B/2D/Eurobird 1 (28.2e)
Change LNB to LNB 1
Priority : Auto
LOF: Universal LNB
Voltage Mode: Polarization
Increased voltage: yes
Tone Mode: band
DiSEqC Mode: 1.2
Toneburst: None
Committed DiSEqC: None
Fast DiSEqC : no
Sequence repeat : no
Command order : committed toneburst
Uncomitted DiSEqC command : None
DiSEqC repeats : none
Longitude: Set this to the correct Longitude for your area.
To find the correct longitude settings for your area go to the following website
In the "Find a Map" box at the top left of the page, enter your post code.
Select your country in the drop down box below it and click on the "Find" button.
This will display a map on the screen and below the map at the bottom right you
will see your Latitude information, example below for Postcode district:NE39 1
Lat:54:55:09N (54.91913)
Lon:1:44:55W (-1.74859)
So in this example in the Dreambox menu you'd set
Longitude: 001.748
West
Latitude : 54:550
North
Use USALS for this Sat: Yes
PRESS OK TO SAVE
Once this is set up on one satellite its easy to sort the rest.
Go back into reception settings
Highlight satellite and choose the satellite you want
The example here shows Hellas on 39.0E
Now select LNB and right to LNB 1
This will fill in the configuration with your previously set configuration
PRESS OK TO SAVE
then scroll back up to satellite
scroll left or right to another satellite
goto lnb scroll right this will automatically set that satellite up
keep repeating this on all satellites needed
Image Used -Blackhole V0.12
If your using DiSEqC 1.2 you will have to set-up the dish positions manually. If your using USALS it should be automatic.
Here's the USALS procedure that I used.
First make sure the dish is correctly aligned on a satellite, eg Astra 28.2E
Press Menu
Set Up
goto
Service Searching
Tuner Configuration
Choose Tuner ALPS BSBE2 (DVB-S2) - Press OK
Now for my configuration***8230;***8230;..
Configuration Mode: Advanced
Satellite : Astra 2A/2B/2D/Eurobird 1 (28.2e)
Change LNB to LNB 1
Priority : Auto
LOF: Universal LNB
Voltage Mode: Polarization
Increased voltage: yes
Tone Mode: band
DiSEqC Mode: 1.2
Toneburst: None
Committed DiSEqC: None
Fast DiSEqC : no
Sequence repeat : no
Command order : committed toneburst
Uncomitted DiSEqC command : None
DiSEqC repeats : none
Longitude: Set this to the correct Longitude for your area.
To find the correct longitude settings for your area go to the following website
In the "Find a Map" box at the top left of the page, enter your post code.
Select your country in the drop down box below it and click on the "Find" button.
This will display a map on the screen and below the map at the bottom right you
will see your Latitude information, example below for Postcode district:NE39 1
Lat:54:55:09N (54.91913)
Lon:1:44:55W (-1.74859)
So in this example in the Dreambox menu you'd set
Longitude: 001.748
West
Latitude : 54:550
North
Use USALS for this Sat: Yes
PRESS OK TO SAVE
Once this is set up on one satellite its easy to sort the rest.
Go back into reception settings
Highlight satellite and choose the satellite you want
The example here shows Hellas on 39.0E
Now select LNB and right to LNB 1
This will fill in the configuration with your previously set configuration
PRESS OK TO SAVE
then scroll back up to satellite
scroll left or right to another satellite
goto lnb scroll right this will automatically set that satellite up
keep repeating this on all satellites needed