HELP!!! My DM800 don't boot

[felipevianna]

HELP!!! My DM800 don't boot!!!!!!!!!!!!

I just can see the Sun Flowers

I tried install BarryAllen and now my DM800 don't boot again
help !
help !help !
help !
help !
help !

[uttnls]

Re: HELP!!! My DM800 don't boot

First of all if it is clone please look for a proper image with the bomb removed.

Second step is to :

Turn the box on while helding the front power button pushed

You'll see on display an IP adress

Then enter that address in browser and click firmware update

Browse for a good firmware (something that worked before)

Reflash, everything should be OK now

[felipevianna]

Re: HELP!!! My DM800 don't boot

ok ... fine

I see:

If you see this, your box didn't boot to Linux.
Unless you interrupted the boot process, this usually means that you have no valid operating system in flash.
Don't panic! It's not a problem. You can just flash a new version and everything will be fine!
Otherwise, you can boot from network or USB.
If you're about to give up, you might get help at the Dream Multimedia Support board!
Currently there aren't many other features...

You can download your current flash contents (64 MB) here, but please don't expect to be able to flash it back. It's merely a debugging feature.
This device's Serial Number is 76204, and was built on 2010/12/08.

and I download a Flash
and the DM is a clone

then...

help !!!!!

thanks ... I'm in panic ... I bought this device 5 days ago

[uttnls]

Re: HELP!!! My DM800 don't boot

ok ... fine

I see:

If you see this, your box didn't boot to Linux.
Unless you interrupted the boot process, this usually means that you have no valid operating system in flash.
Don't panic! It's not a problem. You can just flash a new version and everything will be fine!
Otherwise, you can boot from network or USB.
If you're about to give up, you might get help at the Dream Multimedia Support board!
Currently there aren't many other features...

You can download your current flash contents (64 MB) here, but please don't expect to be able to flash it back. It's merely a debugging feature.
This device's Serial Number is 76204, and was built on 2010/12/08.

and I download a Flash
and the DM is a clone

then...

help !!!!!

thanks ... I'm in panic ... I bought this device 5 days ago

Just read the above post, do the steps indicated by me and tell me exactly what happens, this should work.

If it is a time bomb then you have to use jtag as far as i know to recover the box

[felipevianna]

Re: HELP!!! My DM800 don't boot

Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you !

I'm sorry... I did the reboot and bacause I'm in panic I did't read the last line in my TV .... "Upload nfi"

I'm now searching for a newest image for DM800 clone sim2.01 boot 76 patched

Thank you very much

[uttnls]

Re: HELP!!! My DM800 don't boot

Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you ! Thank you !

I'm sorry... I did the reboot and bacause I'm in panic I did't read the last line in my TV .... "Upload nfi"

I'm now searching for a newest image for DM800 clone sim2.01 boot 76 patched

Thank you very much

I'm glad to see that everything worked as i expected, hope you've managed the rest

PS : don't forget to visit satlover.com time to time :P

[vimmers]

Re: HELP!!! My DM800 don't boot

u should look in this tread after a image

http://www.satlover.com/forum/dreambox-clones/16734-dm800-clone.html

[uttnls]

Re: HELP!!! My DM800 don't boot

Also for users having problems with "NO CA FOUND SECOND STAGE BOOTLOADER'" or "FILE TO BIG" then you can save your dreambox by using this procedure :

1. connect dreambox to router

2. use crossover cable connect router to laptop / PC

3. open dreamup

4. connect null modem

5. connect power to dreambox while holding silver power button till dreamup has fully loaded

6. find IP of box (i used dcc) mine edded up being a very strang 192.168.1.6

7. put this in dreamup

8. open enforcer

9. load image and flash

[vimmers]

Re: HELP!!! My DM800 don't boot

why have both cable and null modem
a cable should be enough

[uttnls]

Re: HELP!!! My DM800 don't boot

why have both cable and null modem
a cable should be enough

It should but is not, read again more carefully, maybe you'll see the trick.

Tested and it only works in this way and using crossover cable in conjunction with serial

[Fantom]

Re: HELP!!! My DM800 don't boot

Use a null modem cable to connect using the above tips.

sim 2.01 pathed images can we found using the website on the display panel when you boot.

[uttnls]

Re: HELP!!! My DM800 don't boot

Use a null modem cable to connect using the above tips.

sim 2.01 pathed images can we found using the website on the display panel when you boot.

If you don't use the above trick, in the webinterface the process will hang and in the dreamup you'll recive "No CA" message and "File To Big"