Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

LT6 Images for DM800

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • aaba
    Banned
    • Jun 2010
    • 1807

    LT6 Images for DM800

    First update of LT6½.

    We have followed changes in OE 1.6 with new Linux
    kernel and Enigma2 updates.
    Some tiny changes to our LT External EPG is also included.


    Openembedded
    OE 1.6

    Drivers:
    dm7025 20101011
    dm800,dm8000 20101013
    dm500hd 20101015


    Secondstage:
    dm800,dm8000,dm7025 #76
    dm500hd #80

    Enigma2:
    20101020 Experimental

    LT revision:
    3433

    NOTE 1!
    If you have the device connected during boot then it will be mounted by
    /etc/fstab and in such case mountpoints below will be used.
    This is for your harddisc and if you choose to use LT Link Manager or LT EPG
    Cachelink Manager with CF or USB Stick.

    Hotplug, devices you insert when Enigma2 is running, is handled by autofs
    and all thoose devices are mounted at /autofs and use the devicename from
    /dev like /autofs/sda1

    dm8000
    /dev/hdda1 /media/hdd auto defaults
    0 0
    /dev/card_sd1 /media/sd auto defaults
    0 0
    /dev/card_cf1 /media/cf auto defaults
    0 0
    /dev/card_sm1 /media/sm auto defaults
    0 0
    /dev/card_ms1 /media/ms auto defaults
    0 0
    /dev/usb_lower1 /media/usb auto defaults
    0 0
    /dev/usb_upper1 /media/usb1 auto defaults
    0 0
    /dev/usb_front1 /media/usb2 auto defaults
    0 0
    /dev/usb_internal1 /media/usb3 auto defaults
    0 0

    dm800
    /dev/hdda1 /media/hdd auto defaults
    0 0
    /dev/usb_lower1 /media/usb auto defaults
    0 0
    /dev/usb_upper1 /media/usb1 auto defaults
    0 0

    dm500hd
    /dev/hdda1 /media/hdd auto defaults
    0 0
    /dev/usb_internal1 /media/usb auto defaults
    0 0
    /dev/usb_external1 /media/usb1 auto defaults
    0 0

    dm7025 (do not use USB on dm7025)
    /dev/sda1 /media/hdd auto defaults
    0 0
    /dev/sdc1 /media/cf auto defaults
    0 0


    If you rebuild your dm500hd to activate USB we recommend that you add some
    kind of over-current protection since otherwise you can destroy your box!
    LT Team takes no responsibility for your box if you modify it!!!!


    NOTE 2!
    Since this is image is based on LT7's code the LT Link Manager controlfile
    is not lt6links.cfg anymore it is now lt7links.cfg


Working...