Many Freezers with Tevii S464

[jochen7575]

Hello,
I have two tv-cards in my PC
a Skystar 2 (works fine)
a Tevii S464 works with HD but make problems with SD. Many freezers also with free channel.
I have the newest driver intalled and built up a new XP-system. With windows 7 the same problems but quite a little bit better.

Do you have any solution?
Is there ist a possibility to set the Skystar for SD-Channels and the Tevii only for HD-Channels?

[pat3]

Re: Many Freezers with Tevii S464

do you use the same renderes and decoders for the sd channels?

how is the cpu usage on freezes?

[jochen7575]

Re: Many Freezers with Tevii S464

I use ffdshow for sd.
I switched to cyberlink codec and it is better but not good.
The cpu usage on sd is between 15 and 40 %

On HD the cpu usage is between 75 and 99 % but there almost no freezers!


The codec could be the reason.
Which is the best for me?

[pat3]

Re: Many Freezers with Tevii S464

Hello,
Is there ist a possibility to set the Skystar for SD-Channels and the Tevii only for HD-Channels?

You have to activate both cards and when you select a hd-channel it should switch to Tevii. For SD try channel Group.
Try Options - Hardware - Channel Group.

[jochen7575]

Re: Many Freezers with Tevii S464

Thanks a lot.

But I can't find Options Hardware Channel Group?
Sorry I am a newbie with dvbviewer...

[pat3]

Re: Many Freezers with Tevii S464

The codec could be the reason.
Which is the best for me?

try dscaler, for me it works perfect and deactivate ffdshow ...

Thanks a lot.

press thanks button to thank so

[jochen7575]

Re: Many Freezers with Tevii S464

Ok thanks for the help I will try dscaler.
Sorry but now you see my thanks ;-)

[pat3]

Re: Many Freezers with Tevii S464

Thanks a lot.

But I can't find Options Hardware Channel Group?
Sorry I am a newbie with dvbviewer...

Settings (ALT+S) -> Options -> Hardware -> Channel Group

[jochen7575]

Re: Many Freezers with Tevii S464

I use version
DVB Viewer Pro V4.8.1.0
At the hardware menu I see the two tv-cards and on the left side Channel Group
There some letters from a to h
How can I pair this letters with a channel group?

[pat3]

Re: Many Freezers with Tevii S464

Look at Channel -> Channel Editor and under network you can choose A,B or C.

[jochen7575]

Re: Many Freezers with Tevii S464

OK this means that I group all the channels for one card in some spezific groups and the other for example hd-channels in another group and set them via options hardware group channel.
The tv card switch then by switching the channel over another group?

[zulqar]

Re: Many Freezers with Tevii S464

I also have SkyStar USB 1.1 old card so can i use both this way?