Tweet
Dreamset 2.30
First configure your settings in the Parameters section.
For Enigma2 dreamboxes, select firmware "Enigma 2 ver 4" in the sttings.
Then download the actual channels of the ream using the transfer icon. Save the result, and start editing. And send back the result.
You can also upload directly pre-defined list of course
Dreamset
Dreamset is a settings editor for digital satellite receivers running Enigma 1, Enigma 2 and Neutrino Plus firmwares like DreamBox. Triple Dragon receivers are also supported.
You can use Dreamset to edit Settings of the following formats:
● Enigma-1
● Enigma-2(Satellite/Cable/Terrestrial)
● Neutrino NPlus
● Triple Dragon
Also Dreamset can open and import settings of the following formats:
● DGStation/Relook 200s/400s (dat)
● Nokia 9800s/9902s Files (m98)
● LyngSat script files (dat)
● SatcoDx(sdx)
● DVB (dvb)
● Humax (hnf)
Dreamset offers a user friendly interface with a plethora of usefull operations which make settings modification easier.
● Add,Change,Delete bouquets and favorite lists
● Reorganize services in bouquets and favorite lists
● Add,Change,Delete services,transponders,satellites
● Flexible User Interface, multiple selection and Drag & Drop.
● User defined Sorting of services in a list/bouquet and other sorting operations.
● Multilanguage support for names(Unicode Support).
● Markers support.
● Clipboard Copy/Paste of lists,services,channels,transponders (you can copy.paste from one Dreamset to another)
● Import Favorite Lists from other settings like DreamBox,Nokia 9800,Humax.
● Convert settings to other supported formats.
● Multilanguage User Interface support.
● DreamBox configuration editor (advanced).
● Custom telnet and http commands.
● Dreamset can minimized to tray, right cklick to Dreamset Icon popups a menu with basic operations.
● Multibox Configuration, you can define more then one box and switch between them at once.
● Signal monitor and DiseqC motor control from dreamset (dreambox plugin is installed in your box) only for Enigma 1 and Neutrino
You can use Dreamset to edit Settings of the following formats:
● Enigma-1
● Enigma-2(Satellite/Cable/Terrestrial)
● Neutrino NPlus
● Triple Dragon
Also Dreamset can open and import settings of the following formats:
● DGStation/Relook 200s/400s (dat)
● Nokia 9800s/9902s Files (m98)
● LyngSat script files (dat)
● SatcoDx(sdx)
● DVB (dvb)
● Humax (hnf)
Dreamset offers a user friendly interface with a plethora of usefull operations which make settings modification easier.
● Add,Change,Delete bouquets and favorite lists
● Reorganize services in bouquets and favorite lists
● Add,Change,Delete services,transponders,satellites
● Flexible User Interface, multiple selection and Drag & Drop.
● User defined Sorting of services in a list/bouquet and other sorting operations.
● Multilanguage support for names(Unicode Support).
● Markers support.
● Clipboard Copy/Paste of lists,services,channels,transponders (you can copy.paste from one Dreamset to another)
● Import Favorite Lists from other settings like DreamBox,Nokia 9800,Humax.
● Convert settings to other supported formats.
● Multilanguage User Interface support.
● DreamBox configuration editor (advanced).
● Custom telnet and http commands.
● Dreamset can minimized to tray, right cklick to Dreamset Icon popups a menu with basic operations.
● Multibox Configuration, you can define more then one box and switch between them at once.
● Signal monitor and DiseqC motor control from dreamset (dreambox plugin is installed in your box) only for Enigma 1 and Neutrino
For Enigma2 dreamboxes, select firmware "Enigma 2 ver 4" in the sttings.
Then download the actual channels of the ream using the transfer icon. Save the result, and start editing. And send back the result.
You can also upload directly pre-defined list of course
Dreamset
Comment