Signal problem

[bokkie]

Re: Signal problem

That's a good Point. Are you using a premade bouquet or do you do a scan?
try sticking a fresh bouquet in there and see what happens.

[digicon]

Re: Signal problem

DM500s clones are known for not liking long cable runs anything over 35m and you will probably struggle with the signal due to the PSU problems not being adequate for the job in hand

[bokkie]

Re: Signal problem

Is it a long cable run jonnh?
Approximatley how many metres is it?

[jonnh]

Re: Signal problem

Thanks for all answers guys.
The cable nr1 works correct and cable nr2 doesnt. But think I will use my spiderbox with cable nr2 for a while when I gets signal on that.

The cable nr2 is 15m and nr1 is longer, about 20m.

#bokkie no dont think any problem with tuner in the dreamboxes, because both works with signal on cable nr1..
#juekra, yes if I get solve with the problem I will write it here of course!
#vimmers yes have same setup and get signal with both boxes but only with one cable thats the problem.

[vimmers]

Re: Signal problem

1 thing you have secured yourself
is that the small wires do not touch the copper cable

[jonnh]

Re: Signal problem

On the newest cable (1.13mm) there is only few small wires, and they dont touch the copper. But using another box now which I get signal with so maybe I try use and solve the problem with the dreambox signal later/other time
Thanks for all answers guys