a lots of BER on some transponder

[spanky_1209]

Re: a lots of BER on some transponder

i found out that i got only BER on vertical transponder, all horizontal channel working great

so its a tuner problem ??

Do you maybe have a second satellite reciver installed on the same LNB. I have this situation in my home and if I am not turning off the second reciver I have problems watching H or V programms (depending on what channel I leave the second reciver on).

[digicon]

Re: a lots of BER on some transponder

was thinking of buying a clone but not now, only a suggestion, try it on a friends set up if no probs with his, then you know box is wrong but if other box on your set up working ok, then problem most deff faulty box i think. good luck

Mate dont rule out the clones i get them all the time if a customer specifically asks for one and i have a DM800se my self in the office and its perfectly fine runs just like the original.

[nush]

Re: a lots of BER on some transponder

same here, mine runs well, ive had db500s clone, my mate uses it now, no problems at all with it.
i now have db800 hd pro, same again no problem with it apart from some images dont always function as i would like, but thats software not the box.

[sqazilou]

Re: a lots of BER on some transponder

what would you suggest instead of my clone i am thinking about buying an openbox what about that ?

[marantz]

Re: a lots of BER on some transponder

did you check the lnb and the cables. maybe it needs better signal than dm600.

[sqazilou]

Re: a lots of BER on some transponder

did you check the lnb and the cables. maybe it needs better signal than dm600.

i checked with another dm500 it worked great

Hi All, its all due to clone box, the tuner quality is not good. Brother figure out the tuner specs underneath your box, and compare with other one. As far as I understand box is faulty.

can i change the tuner alone ??

[whinpo]

Re: a lots of BER on some transponder

you can change the tuner, I think it costs around 60-70$...

[sqazilou]

Re: a lots of BER on some transponder

you can change the tuner, I think it costs around 60-70$...

i think its better to buy a new one, not a clone this time !

[yselim]

Re: a lots of BER on some transponder

i have a problem similar to yours. but when I change the channnel and reopen it a few times it gives 0 ber errors. I guess that my problem source is my switch. are you using a switch? or directly using only one dish-lnb

[BM300]

Re: a lots of BER on some transponder

i have a problem similar to yours. but when I change the channnel and reopen it a few times it gives 0 ber errors. I guess that my problem source is my switch. are you using a switch? or directly using only one dish-lnb

I had switching problem with diseqc.
Here is how I got it to work:

Configuration Mode = advanced

Satellite = Hotbird 13E (Change satellite name here)*
Voltage mode = Polarization
Tone mode = Band
LNB = LNB 8 (Change LNB 1-8)*
DiSEqC mode = 1.1
Toneburst = None
Committed DiSEqC command = none
Fast DiSEqC = no
Sequence repeat = yes
Command order = uncommitted, committed, toneburst
Uncommitted DiSEqC command = Input 8 ( Change LNB 1-8)*
DiSEqC repeats = none
LOF = Universal LNB
Increased voltage = yes - for long cables
Polarity = Auto
Tone Amplitude = 800mV