When i power on my dm500s it hangs and only the green light comes on with no display and sometimes no light comes on.is it an image problem?
Alert: Don't Use Hotmail Email Accounts for registration
Collapse
Before Access to all Forums and Trial accounts you must need to activate your account Email address
DM500 help
Collapse
X
-
Re: DM500 help
Yes it was the power supply repaired it yesterday, it had a burnt out capacitor.i opened the power supply because i could hear a weird sound in the supply,saw the burst capacitor 16 volts 1000uf changed it and my box is working fine.cannon_29
DM 500sComment
-
Re: DM500 help
I am happy that your problem solved.
How often do you face power cut (electricity) problem in your area?
because i had similar problem.... power adapter - off , dm - repairedIf You Like My Post..... Please Press the Thanks ButtonComment
-
Re: DM500 help
My area had high low voltage for 3 days which resulted in this happening,as the power supply is sealed i had to cut it open to repair it now i have taped it up so if i have a problem again i can easily check my power supply.cannon_29
DM 500sComment
-
Re: DM500 help
i found my old power adapter and Voltage is measured about 4,5-5V
I think that should be 12V
I will try to fix it as you did but.... how to open this box???
hammer?If You Like My Post..... Please Press the Thanks ButtonComment
-
Re: DM500 help
I used a sharp blade knife to open the supply,you will see a line around the box cut on that line,also the power supply will still give you 12v if the capacitor is burnt out but it does not give you 2 amps which is needed for the box.12v 2amps.cannon_29
DM 500sComment
-
Re: DM500 help
Or is it easier to buy a new one?Comment
-
Re: DM500 help
I have bought a new one but you now ...
a second adapter is always useful and generally I like fixing things...
Finally, I opened (cracked) the box no there is nothing to seem burnt.
I think that i can't fix it
anyway....thanks for your advicesIf You Like My Post..... Please Press the Thanks ButtonComment
Comment