need a working config example for 0963 Sky card?

[SatWaveDude]

Can someone post a working oscam.server config examle for 0963 Sky card?

[reader]
label                         = reader-1
description                   = sky_uk
protocol                      = smartreader
device                        = 001:003
services                      = sky_uk
smargopatch                   = 1
caid                          = 0963
detect                        = cd
mhz                           = [COLOR="Red"]???[/COLOR]
ident                         = [COLOR="Red"]??????[/COLOR]
group                         = 1
emmcache                      = [COLOR="Red"]?,?,?[/COLOR]
auprovid                      = [COLOR="red"]??????[/COLOR]
ratelimitecm                  = 4
ratelimitseconds              = 10

Above you see what I have at the moment but not shure about the RED collored sections.

I have discovered that the [B]card MHz[/B] and [B]oscam MHz[/B] must be set for properbly detecting:

mhz = [COLOR="Red"]343[/COLOR]
cardmhz = [COLOR="red"]357[/COLOR] 

Otherwise my card wil not be detect by oscam.

If your card is running with another speed please tell.

[brogan]

Re: need a working config example for 0963 Sky card?

indent 0963:000000

this is in my self built server works fine.

[reader]
label = skyuk
protocol = pcsc
device = 0
cacheex = 1
caid = 0963
ecmwhitelist = 0963:16,27,2B,2E,34,36,3B,3D,3E,41,42,44,45,47,4B, 4E,4F,50,51,53,54,56,57,58,59,5D,5E,5F,60,61,62,63 ,64,65,66,67,68,69,6A,6B,6C,6D,6E,6F,70,71,72,73,7 4,75,76,77,78,79,7A,7B,7C,7D,7E,7F,80,82,84,85,89, 8B,8F,99,9B,9C,9F,A2,A8,AC,AD,AE,B0,B4,B7
detect = cd
mhz = 600
cardmhz = 375
ident = 0963:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
lb_weight = 101
dropbadcws = 1

these settings update the card

[SatWaveDude]

Re: need a working config example for 0963 Sky card?

Thank you so much brogan.

Wich channel do I have to tune in to receive emm's from?

[gianni253]

Re: need a working config example for 0963 Sky card?

.... these settings update the card

@SatWaveDude
Remember that in order to update you must enable dvbapi and also enable update for the user.
Any channel should work.
Bye

[SatWaveDude]

Re: need a working config example for 0963 Sky card?

I do not use dvbapi since it's an debian server and not an receiver.

[gianni253]

Re: need a working config example for 0963 Sky card?

I do not use dvbapi since it's an debian server and not an receiver.

It makes no difference ... you need dvbapi to update !

[bonilla]

Re: need a working config example for 0963 Sky card?

If it helps , here you have the syntax

Syntax
S: [device] [PMT file name]
P: [CAID]:[provider ID]:[service ID]:[ECM PID]:[CHID] continue
I: [CAID]:[provider ID]:[service ID]:[ECM PID]:[CHID] ignore
J: [CAID]:[provider ID]:[service ID]:[ECM PID] join
A: ::[service ID]:[PMT PID]:[provider ID]:[ECM PID] dummy
X: [CAID]:[provider ID]:[service ID]:[ECM PID] demux
D: [CAID]:[provider ID]:[service ID]:[ECM PID] delay
L: [CAID]:[provider ID]:[service ID]:[ECM PID] ECM length (hexa)
M: [CAID]:[provider ID]:[service ID]:[ECM PID] target CAID:[target provider ID]
S = set DVB API device name and PMT File name (valid for STAPI only!)
P = set priority, recommended for pay-per-view services/EMMs (use carefull!)
[continue] = 1 # proceed with priority, recomended for pay-per-view services
= # [blank] none (default)
I = set ignore
J = joined CAID[:]joined provider ID[:]joined ECM PID join to another ECM PID
A = set a dummy ECM request with CAID FFFF for services with a constant CW shown as unencrypted service
X = add decoding on an extra demux index on the same CA device (Multi ECM) (not support on all STBs)
D = set delay in milli seconds writing CWs
L = set ECM length in hexa
M = mapping

[tedy58]

Re: need a working config example for 0963 Sky card?

Can someone post a working oscam.server config examle for 0963 Sky card?

[reader]
label                         = reader-1
description                   = sky_uk
protocol                      = smartreader
device                        = 001:003
services                      = sky_uk
smargopatch                   = 1
caid                          = 0963
detect                        = cd
mhz                           = [COLOR="Red"]???[/COLOR]
ident                         = [COLOR="Red"]??????[/COLOR]
group                         = 1
emmcache                      = [COLOR="Red"]?,?,?[/COLOR]
auprovid                      = [COLOR="red"]??????[/COLOR]
ratelimitecm                  = 4
ratelimitseconds              = 10

Above you see what I have at the moment but not shure about the RED collored sections.

I have discovered that the [B]card MHz[/B] and [B]oscam MHz[/B] must be set for properbly detecting:

mhz = [COLOR="Red"]343[/COLOR]
cardmhz = [COLOR="red"]357[/COLOR] 

Otherwise my card wil not be detect by oscam.

If your card is running with another speed please tell.

Hi m8 it works perfect with this config of reader with phoenix interface

 [reader]
label                         = Reader1
description                   = sky_uk
protocol                      = mouse
device                        = /dev/ttyUSB0
pincode                       = ***X
caid                          = 0963
boxid                         = ******XX
detect                        = cd
mhz                           = 1000
cardmhz                       = 357
ident                         = 0963:000000
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-g                    = 1

I have tried in DM800 MHz = 372 Cardmhz = 372 and it worked perfect too.

[SatWaveDude]

Re: need a working config example for 0963 Sky card?

if you run oscam on your receiver you have to use dvbapi but if you run oscam on a PC (non-receiver) you dont have to use dvbapi.

The MHz may be different for Sat-receiver or PC.
Only the card MHz stays the same for both.

I use the Smargo Smartcard Plus reader v1.7 and found out that the card only detects correctly with: MHz 343 and Card MHz 357

[SatWaveDude]

Re: need a working config example for 0963 Sky card?

The strange thing is when it reports error init card I higher the card mhz value to 500 or 600 and pause/restart the reader and then it detects the card.

Well I have played around with the settings and found out that these always inits the card when restarting oscam.

[reader]
label                         = smargo-4
description                   = BSkyB
protocol                      = smartreader
device                        = 001:006
services                      = bskyb
smargopatch                   = 1
caid                          = 0963
ecmwhitelist                  = 0963:B3,B4,B7,3B,3E,42,44,45,47,4B,4E,4F,50,53,54,56,5F,6A,6C,61,62,64,65,66,67,68,69,6A,6B,6C,6D,6E,6F,70,71,72,73,74,76,77,78,79,7A,7C,7D,7E,80,82,85,8B,89,9A
detect                        = cd
mhz                           = 800
cardmhz                       = 480
ident                         = 0963:000000
group                         = 1
emmcache                      = 1,3,2
blockemm-unknown              = 1
blockemm-g                    = 1
saveemm-u                     = 1
saveemm-s                     = 1
lb_weight                     = 150
disablecrccws                 = 1
cccreshare                    = 2

The card is detecting correctly but still no lucky to see any entitlements

[mirny]

Re: need a working config example for 0963 Sky card?

it will be worse with slyuk cards
then any config will help you

[m404]

Re: need a working config example for 0963 Sky card?

It makes no difference ... you need dvbapi to update !

whut, no.

DVBapi is only required to receive the PMT stream (what you get from an LNB on a SatDish, for example) ... if you use a receiver as client, and tell it to forward EMMs to the server, where the card is connected to / read on , then that server does NOT require DVBapi to write EMMs to the card. In fact, if the server isn't connected to any DVB source (Dish, Cable, Terrestrial), then enabling DVBapi on that server is utterly pointless.

[SatWaveDude]

Re: need a working config example for 0963 Sky card?

Hi m404,

Yes exacly!

DVBAPI is not required on a Oscam server if Oscam installed on a non-receiver platform.