oscam and satlover

[bokkie]

Re: oscam and satlover

you dont need to convertor. after you install oscam you found oscam.server and enter server information and user and pass and then save your setting
and after that start emu.

Where did I say you need to use it? I simply asked if he had as it makes it easier for someone new to oscam.
It is also an option to use it, just in case you entered something incorrectly.

[BlueIsMyColor]

Re: oscam and satlover

No, limit is general for all providers.

that's an inconvenient, for me.

When i use oscam i always got a problem: after one hour (more or less) the images freezes and i must change the channel to make that work again. With cccam that does not happens.

[asus7]

Re: oscam and satlover

Here is an example of a working Oscam
[reader]
label=cccam.satlover.com
enable=1
protocol=cccam
device=cccam.satlover.com,***xx
user=******xx_******xx
password=www.satlover.com
cccwantemu=0
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

Hello friends!
With a few tweaks now everything works!
Most likely I forgot some steps ...

Thanks to all

[asus7]

Re: oscam and satlover

Here is an example of a working Oscam
[reader]
label=cccam.satlover.com
enable=1
protocol=cccam
device=cccam.satlover.com,***xx
user=******xx_******xx
password=www.satlover.com
cccwantemu=0
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

Hello friends!
With a few tweaks now everything works!
Most likely I forgot some steps ...

Thanks to all

[ZoxPa]

Re: oscam and satlover

Try to enable option "Decodeforever" in Configuration/dvb-api under web interface of oscam.
Oscam after 3 attempts to decode give up, so if you enable this option above you will force oscam to decode forever.
And how many c-lines do you have under oscam? I have 3 and everything is ok, specialy with latest versions of oscam.

[duhoki]

Re: oscam and satlover

I had same problema s you. After i enabled keepallive= 1 parameter which will hold the connection with the server up, it worked after this. So you might want to try it out.

[BlueIsMyColor]

Re: oscam and satlover

Try to enable option "Decodeforever" in Configuration/dvb-api under web interface of oscam.
Oscam after 3 attempts to decode give up, so if you enable this option above you will force oscam to decode forever.
And how many c-lines do you have under oscam? I have 3 and everything is ok, specialy with latest versions of oscam.

I will give it a try.

I had same problema s you. After i enabled keepallive= 1 parameter which will hold the connection with the server up, it worked after this. So you might want to try it out.

i have tried keep alive enabled but have no luck.

[mirny]

Re: oscam and satlover

one question: is it possible to limit the shares only to hop1 in a specific provider over oscam?

yes it is, set the caid, provid and maxhop parameters in oscam.server

[gianni253]

Re: oscam and satlover

I may be wrong, but after my tests with cccam, oscam and mgcamd (old and new versions of all emus) I have the impression that cccam 2.0.11 is the most stable client for satlover's clines.

[BlueIsMyColor]

Re: oscam and satlover

yes it is, set the caid, provid and maxhop parameters in oscam.server

give me example, please.

I may be wrong, but after my tests with cccam, oscam and mgcamd (old and new versions of all emus) I have the impression that cccam 2.0.11 is the most stable client for satlover's clines.

cccam 2.1.4 was one of the best for me. I will try 2.0.11

[asus7]

Re: oscam and satlover

I may be wrong, but after my tests with cccam, oscam and mgcamd (old and new versions of all emus) I have the impression that cccam 2.0.11 is the most stable client for satlover's clines.

Hello! I agree with you ... even if after solving the problem with the configuration oscam everything runs very well!

[mirny]

Re: oscam and satlover

give me example, please.

[reader]
label = cccamserver1
protocol = cccam
device = something.dyndns.tv,12000
user = user
password = pass
ident = 0100:000068;0500:043800;090F:000000;093E:000000;09 63:000000;09C4:000000;09CD:000000;0B00:000000;0B01 :000000;0D02:0000A0;0D96:000004;1702:000001,000002 ,000003;1803:000000,007001,007101;1880:000000,0020 11,002111,002113;1861:000000
group = 1
cccversion = 2.3.0
cccmaxhops = 2
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0

[BlueIsMyColor]

Re: oscam and satlover

what version of oscam do you suggest to install in dm500s? Always the last one?

[ZoxPa]

Re: oscam and satlover

[reader]
label = cccamserver1
protocol = cccam
device = something.dyndns.tv,12000
user = user
password = pass
ident = 0100:000068;0500:043800;090F:000000;093E:000000;09 63:000000;09C4:000000;09CD:000000;0B00:000000;0B01 :000000;0D02:0000A0;0D96:000004;1702:000001,000002 ,000003;1803:000000,007001,007101;1880:000000,0020 11,002111,002113;1861:000000
group = 1
cccversion = 2.3.0
cccmaxhops = 2
ccckeepalive = 1
cccreshare = 1
cccreconnect = 0

This is share limit for reader( for all caids mentioned, not for one of them how is BlueIsMyColor asked)

[mirny]

Re: oscam and satlover

it's example, he can define whatever he want