Emu that can connect to CCCam?

[khalidomar]

Hello friends,

Is there any cardsharing emu (other than CCcam) that can connect to CCcam CLines? The same way CCcam emu connects to Newcamd (via N: Line) and Camd3 (via L: Line), etc...

Thanks.

[ScenicSat]

Re: Emu that can connect to CCCam?

I heard only incubuscamd and flycccam can conect like client to CCCAM

[kudok]

Re: Emu that can connect to CCCam?

i have a Kathrein UFS 910 and use MGCamd1.35 to connect to Satlovers

best regards
kudok

[faccione]

Re: Emu that can connect to CCCam?

i have a Kathrein UFS 910 and use MGCamd1.35 to connect to Satlovers

best regards
kudok

uh! config file example please ?

[khalidomar]

Re: Emu that can connect to CCCam?

I heard only incubuscamd and flycccam can conect like client to CCCAM

i have a Kathrein UFS 910 and use MGCamd1.35 to connect to Satlovers

best regards
kudok

I guess you guys are referring to plugins that run on a PC, right?
Do you know if any emu software can run on the box itself (DM500s for example) and connect to CCcam CLine?

[faccione]

Re: Emu that can connect to CCCam?

Kathrein UFS 910 is a sat box, AFAIK

[kudok]

Re: Emu that can connect to CCCam?

here is my config, faccione:

#######

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 10 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 01 } root newcs

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 8080

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 30 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 11 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
#########

working since ages

kindest regards
kudok

[ScenicSat]

Re: Emu that can connect to CCCam?

@kudok

i think faccione means the cfg from the mgcamd with the settings to the line to connect...

[Knicko]

Re: Emu that can connect to CCCam?

Hello friends,

Is there any cardsharing emu (other than CCcam) that can connect to CCcam CLines? The same way CCcam emu connects to Newcamd (via N: Line) and Camd3 (via L: Line), etc...

Thanks.

Hi

A very good emulator to connect to CCcam is the scam 3.58

easy to connect.

#================== CCCAM Client ===================
/net/cccam/DM/user=user1
/net/cccam/DM/pass=pass1
/net/cccam/DM/host=192.168.1.26
/net/cccam/DM/serv=12000

greetz Knicko

[seb131]

Re: Emu that can connect to CCCam?

Hi
oscam does, and it support many other protocols. But it is not a CAM, it is a reader which can reshare in another protocol (like newcamd).

[Knicko]

Re: Emu that can connect to CCCam?

scam is very easy to configure to connect to a server.

example to connect to server three on satlover

#================== CCCAM Client ===================
/net/cccam/<name>/user=Free4ever_46EC4D88
/net/cccam/<name>/pass=www.satlover.com
/net/cccam/<name>/host=cccam2.satlover.com
/net/cccam/<name>/serv=5814

or when you connect in homesharing to another server

example:

serverbox IP : 192.168.178.2

In cccam.cfg the f:line

F: sat1 lover1

clientbox:

in scam config:

#================== CCCAM Client ===================
/net/cccam/DM/user=sat1
/net/cccam/DM/pass=lover1
/net/cccam/DM/host=192.168.178.2
/net/cccam/DM/serv=12000

finish. That is all.

greetz Knicko

[satfan]

Re: Emu that can connect to CCCam?

I heard only incubuscamd and flycccam can conect like client to CCCAM

[HelgeSchneider]

Re: Emu that can connect to CCCam?

@khalidomar: maybe you could explain why wont you use cccam and what box you will use

i would prefer mgcamd or oscam
but we can show the advantages or disadvantages only if we know the reason

best regards,
FunThomas