CCcam Freezing Problems Explained

[sonc]

Re: CCcam Freezing Problems Explained

Yes it can.....you only need a few good ones. This works better than having lots of poor ones.

[stewie]

Re: CCcam Freezing Problems Explained

i change image and now i have less freezing from satlover server

Would you share which image you are using now?

[peremacedonia]

Re: CCcam Freezing Problems Explained

I was using Pli image but after change in Gemini it is less freezing.Pli is good image but for sharing i think Gemini is better.

[joebrincat14]

Re: CCcam Freezing Problems Explained

I am new to card sharing and have no local cards however I already have good peers. How can I properly set my cccam.cfg file for best performance?

Thanks

[sabota]

Re: CCcam Freezing Problems Explained

I am new to card sharing and have no local cards however I already have good peers. How can I properly set my cccam.cfg file for best performance?

Thanks

CAID IGNORE FILE : /var/etc/CCcam.ignore
LOG WARNINGS : /tmp/warnings.txt
SERVER LISTEN PORT: *****
WEBINFO USERNAME : ******
WEBINFO PASSWORD : ******
F: frend password 3 0 0 { 0:0:1 }
C: frend.dns 12000 frend1 password1 no { 0:0:3 }
add in var/etc
cccam prio
cccam ignore list

[green_sat]

Re: CCcam Freezing Problems Explained

Does anyone have good example ofthese file scccam.channelinfo, cccam.prio and cccam.providers files.

I am only want to use the sly 28.2... settings.

and many thanks for all the different answers... I am alot clearer about the content of my cfg file.
I will clean it and retry... thank you again.

[tonybod]

Re: CCcam Freezing Problems Explained

Does anyone have good example ofthese file scccam.channelinfo, cccam.prio and cccam.providers files.

I am only want to use the sly 28.2... settings.

and many thanks for all the different answers... I am alot clearer about the content of my cfg file.
I will clean it and retry... thank you again.

There has been work on one optimised for satlover here.

http://www.satlover.com/forum/cccam/15220-cccam-prio-optimized-for-satlover.html

Hope it helps.

[odysseas1991]

Re: CCcam Freezing Problems Explained

When you say the term "freezing", do you mean the channel freezes or the whole box, thus requiring a restart? Because on my latest patched tm5402HD connected to a C line from the free server simply as a test, I find that going onto a scrambled channel that it CAN decrypt, it shows a brief picture then freezes the whole box and I need to switch it on and off from the mains. I hope this is purely a server issue and not an error on my end. I hope someone could clarify...

[tonybod]

Re: CCcam Freezing Problems Explained

When you say the term "freezing", do you mean the channel freezes or the whole box, thus requiring a restart? Because on my latest patched tm5402HD connected to a C line from the free server simply as a test, I find that going onto a scrambled channel that it CAN decrypt, it shows a brief picture then freezes the whole box and I need to switch it on and off from the mains. I hope this is purely a server issue and not an error on my end. I hope someone could clarify...

Channel freezes. If the box is freezing I would suggest it is a problem with the box as if everyone's box were freezing, nobody would be using the C lines.

Do you have the latest version of cccam running? And has ****** shown up any relevant freeze problem for your receiver?

[odysseas1991]

Re: CCcam Freezing Problems Explained

Ah right, I understand now. I am not entirely sure what the latest version of the ccam is because all I have done is patched it using a phantompatch from the "download center" website designed for technomate for my model. I key in 8281 on screen and continue... How would I check for the latest one, and hence how would I install it...Im assuming via usb? Just checking now, I am running the 103p and I just noticed that there is a 104p available. Is the ccam included in this phantompatch? Im sorry for these amatuer questions, this is new to me and I am trying to learn so I really do appreciate the help you are giving!

And yes, I specifically searched ****** using many different search queries but couldnt find a similiar problem.

Thanks for your help
Odysseas

[tonybod]

Re: CCcam Freezing Problems Explained

Ah right, I understand now. I am not entirely sure what the latest version of the ccam is because all I have done is patched it using a phantompatch from the "download center" website designed for technomate for my model. I key in 8281 on screen and continue... How would I check for the latest one, and hence how would I install it...Im assuming via usb? Just checking now, I am running the 103p and I just noticed that there is a 104p available. Is the ccam included in this phantompatch? Im sorry for these amatuer questions, this is new to me and I am trying to learn so I really do appreciate the help you are giving!

And yes, I specifically searched ****** using many different search queries but couldnt find a similiar problem.

Thanks for your help
Odysseas

I'd love to offer help, but I've got a Linux box, I'm not familiar at all with your setup.

[odysseas1991]

Re: CCcam Freezing Problems Explained

See, thats the thing, I didnt put any images of any sort, the TM5402HD has CCAM built in, all I did was a phantompatch to enable softcam updates, then I stumbled on the term c line and ended up in this forum. I dont know why, it doesnt matter what I do, once I connect to a server, if i select any scrambled channel that requires the c line to decrypt, it will simply crash the box...nvm, I will try and solve this, and if I find a solution I will post it up.

Thanks

[odysseas1991]

Re: CCcam Freezing Problems Explained

Kopper

I gave the technomate a refresh resinstalling all the original firmware and then put the patches on. Then I used a more stable c line for the hidden section of the server 3 list. It now definately is better, the channels work with minor interruptions (I dont mind since im only using these c lines as a test with intention of buying) It is prone still to the odd crash of the box when changing channel though but a definate improvement nonetheless...

Thanks for your help
Odysseas

[uttnls]

Re: CCcam Freezing Problems Explained

I had this topic in old forum but since most of my topic are gone with the server crash lets start this again .

Freezing - some possible causes
Most people who have been using CCcam servers for some time will have probably experienced freezing at some point.

There are several things that will cause freezing, also remember you have no control over what is happening on the server you are connected to. A lot of the problems come from the other end.

Firstly, when you allocated your router ports, set them for TCP/UDP.
You can test if the ports are opening by going here:

http:// www. amule.org/testport.php

Common causes are:

Your internet connection is slow. Check your ping times and DONT download torrents at the same time when viewing - sharing with CCcam.

The person you are connected to has slow internet connection. By this i mean not only the speed but the response time as well ( witch is more critical than speed itself ) .

You have the same C Line active in more than one receiver
You can't do that. Think it as making a call with several persons to answer in the other side ....

You have two different C lines to two different servers - both supplying the same card.
This can cause problems. Test and find with witch you have the better performance and block the other card.

You are receiving the same card on hop1 & hop2 etc..
Filter the hop2's out.

The server is overloaded at the other end.
The most common cause of them all .An overloaded hop1 server can cause your file to connect to a Hop2 instead - but then keeps trying to get back on the hop1.

Because a guys card shows you hop1 - it does NOT mean it is hop1 - or he even has a card. There are methods of faking this - and a lot out there doing it. Try another server with the same card to compare.

Some hop2's can be faster than some hop1's - filter them out.

Your Ccam config is not optimized.
Look at my other post regarding cccam.cfg

Your dish is not tuned correctly to the sat.

Some people will not accept a connection that is slower than 100ms. If a connection is around 400ms - it is quite possible that person does not have the relevant card.

Certain cards freeze/glitch if the other persons file is not set up correctly.

As mentioned above, you have no control over the set up at the other end. Sometimes you have to try several sources to test for a reliable server.

Also fillter uneeded CAID/Providers, you like to have milions of cards just to be there, then you can say bye bye to performance

[spanky_1209]

Re: CCcam Freezing Problems Explained

True .
NDS for example needs fast ECM times while Viaccess doesnt

I agree with you that ECM takes more time for the NDS, I am currently trying a 48 hours test for CS and the encryption is NDS its freezing every 5-6 sec. but its still watchable.