Dolly Buster

[jochen7575]

Re: Dolly Buster

It works with the Skystar on the transponder 11200 but not with the tevii

So this is not a big problem, but it should work with the tevii on all hotbird transponders

[rasanansa]

Re: Dolly Buster

with dvbviewer on pc I can't receive dolly buster channel on Hotbird
Hotbird 13
Frequency 11200 Mhz
Vertikal
SR: 27.500
FEC 5/6

the search option find nothing on this transponder.
Any idea?

Do you have a motorised dish?
Try rotating your lnb. Might have the wrong skew.

[rizwan]

Re: Dolly Buster

Any reason using two cards same time ?

[jochen7575]

Re: Dolly Buster

Both TV-Cards are switched to the same diseq-switch, so the signal quality must be the same

[vimmers]

Re: Dolly Buster

it must be the same as using 2 receivers they can't work together on the same switch well yes they can but they must stay on the same transponder
so if 1 of your cards stay on 1 transponder and the other on another
u can only see from 1 cards

[rizwan]

Re: Dolly Buster

Just remove one card and then try this freq.

[jochen7575]

Re: Dolly Buster

Ok I try it tomorrow. I become a new DVD-burner who must built in...

Thanks

[jochen7575]

Re: Dolly Buster

I build one after another card out and in so that I have only one card built in at the moment and the problem stay with the tevii

[vimmers]

Re: Dolly Buster

also if u use cable direct to lnb

[jochen7575]

Re: Dolly Buster

I have a multiswitch with 10 outgoing points.

5 conected satellite receivers works fine and one pc card.

One card (the tevii) make problems with one hotbird transponder.
Sorry it make no sense to change something at this equipment.

I changed the outgoing port at the multiswitch, but it didn't work on the 11200MHZ

[vimmers]

Re: Dolly Buster

no ofcourse not
it was just for testing the tevii card