VU+ Uno tuner signal strenght in the box is not very sensitive

[easydigital]

Because of this, Vu+ UNO is equipped with an advanced interchangeable tunning system, that is, you will be able to change your DVB-S2 turner to a hybrid

IS THERE a more sensitive pluggable DVB-S2 tuners which give more S/N sensitive to try ?

[lassang01]

Re: VU+ Uno tuner signal strenght in the box is not very sensitive

run the FPGA upgrade and you will get better signal in you vu+ uno
here is a tutorial how to do it:
http://www2.vuplus.com/images/manuals/uno_flash_upgrade_v1.1.pdf

[m404]

Re: VU+ Uno tuner signal strenght in the box is not very sensitive

indeed, i cannot agree with the statement of it not being sensitive enough (i'm aware the OP probably isn't even around, but others may read it :P ).

sure, it's not DX feedhunter material (then again, only a handful of receivers are) ... but it's definitely much better than the average receiver (i have it hooked to my t90, where i have and had hooked alot of other receivers, and it is capable of receiving problematic feeds like the 28.2e UK spotbeam or the 0.8w nordic spotbeam much better than other receivers).

FPGA upgrade is mandatory (although by now there shouldn't be many Uno around without it).

[digicon]

Re: VU+ Uno tuner signal strenght in the box is not very sensitive

I own both a Vu Uno and a DrHD F15 which is a Dxer's box and although the Uno cannot match the F15 for tuner sensitivity it is still very good, There was another update for the FPGA upgrade that came out in october for the Ultimo and Uno so many people could have missed this update.