Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Vu+ SOLO Update

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • EUROASTRA
    Experienced Board Member
    • Sep 2010
    • 1198

    #31
    Re: Vu+ SOLO

    Install USB-DTT in Vu +

    spain pdf

    Flashing Your VU+ Duo With A USB Stick

    Easiest method is by USB make sure its formatted to fat32.

    1. Download the USB version of any image.

    2. Unrar and send the vuplus folder to your USB stick. Or in some cases you may need to make a folder named vuplus then inside that folder create another named duo. The send the boot, kernel and root file to the duo folder.

    3. Turn off the power at the back of the VU rear of the VU+ you'll find the switch near the power cable. Insert your USB stick in the front USB port.

    4. Turn back on the power.

    On the front display you'll see reading USB device, this takes a while then you'll see erasing then programming.

    It will then tell you to remove USB and reboot. Reboot with the power switch at the back.
    Attached Files
    Please read the Forum Rules
    Problems and questions in PM! I'll not answer!

    Comment

    • MIDO2010
      Experienced Board Member
      • Sep 2010
      • 1644

      #32
      Re: Vu+ SOLO

      Power of Dream HD+ 2.0 (POD HD+) for Vuo+Solo

      New Update: 31-10-2010

      - Passage des Sandbox Smartpicons en 1.42
      - Ajout des chaines Belges (La une,...)

      _http://hotfile.com/dl/79531955/68e9cf6/solo_usb_upgrade.zip.html

      Comment

      • sonc
        Experienced Board Member
        • Jun 2010
        • 1568

        #33
        Re: Vu+ SOLO

        VIX Team Vu+ Solo Image v1.0 - 01/11/2010

        New VIX Image - v1.0
        31/10/2010 - OE1.6

        Based on Official 5.3 Image

        Enigma: 04-10-2010-experimental.
        Enigma Plugins: 04-10-2010.
        GCC Version: 4.4.3.

        Team VIX Enhancements

        This image has been written based upon bringing similar functionality to the vu+ solo as the vu+ duo. Anyway, here's all the functionality:

        * VIX Solo 1.0 Bootlogos, Radio Logos and Shutdown Logos.
        * Softcam Manager completely re-written to allow users to add any softcams that are not currently available in the plugins server. If a script is not necessary, then you can just copy the binary file over to /usr/softcam/. This will allow you to use the binary. If you need a script, then andy will explain how to do it . Also, with the new softcam manager, softcams will start in the order in which you add them to the autostart. So, if you want oscam and cccam to autostart, if you add cccam first, then oscam, cccam will always start before oscam (basically, pointless ). So, make sure you add them in the correct order!. Also, some users need mgcamd to update entitlements (and other similar cam usage might be required). So now, if you want to stop a cam, the autocam checker will not check for stopped cams. For example, if you stop any autostarted cams, then start mgcamd (or whichever cam is not autostarted) manually, this will stay running until you either manually stop it and start the required cams, or restart your box.
        * VIX Device Manager optimised to work with the solo image.
        * VIX Image Manager - Allows you to take backups of your current image and restore the image.
        * New IPK Installer, just copy your .ipk fle into '/tmp' and goto the menu option.
        * VIX Overscan fix - If the menus do not show correctly on the screen, you can alter the numerical value in the Skin Settings menu, to change the location of the menus/items on screen to show the whole menu.
        * VIX Swap Manager - Works with swap partitions and swap files. If you want to use a partition, you will manually need to create this yourself . For swap files, file sizes are limited to 64mb, as this is plenty for a swap file, and to enable stability with the solo image.
        * RyVIX EPG Grabbers.
        * CrossEPG Grabber - Includes latest image patch to import data without need for a restart.
        * EIT, MHW, FREESAT & VIASAT EPG Download.
        * Cron jobs supported - create the "root" file with the jobs you want to run in '/etc/crond/'
        * Autotimer image integrated in to image. Work has been undertaken to ensure that autotimers search all info to ensure that it picks up all available epg data to catch an event... Seems to be working great :thumbsup:. Also, when you add an item to the autotimer, it will do a scan straight away to add all items to your timers. Finally, scanning for new autotimers will only take place when your machine is in standby mode. option can be turned off in settings.
        * CoolTVGuide Plugin integrated to image - Use epg button to load.
        * CCcam Info - Written specifically for image to help speed up skin loading. This is mainly used for the second info bar .
        * Recorded items list modified to allow moving of items, browsing directories, etc. Works similarly to suomipoeka plugin. Can be selected to load via the recorded items button, or from the tv button.
        * Permanent Timeshift Plugin integrated (Disabled by default, turn on via Timeshift settings).
        * Integrated VirtualZap (long hold of OK button).
        * Integrated EPG Search (yellow button).
        * Update Manger - Use the online updates to update the image to the latest fixes.
        * Wireless LAN Support
        * Smargo Support
        * Panic Button - Goes to channel number 1 in your channel list and clears browsing history


        Button Mappings

        * Short Red - Show current event info.
        * Long Red - Show current channel EPG info.
        * Short Green - Timers.
        * Long Green - AutoTimer Timers.
        * Short Yellow - EPG Search.
        * Long Yellow - IMDB Database. < --- Currently not working - read Known Bugs
        * Short Blue - Extensions.
        * Long Blue - Plugins Menu.
        * EPG - Opens the Cool TV EPG plugin


        Known Bugs

        * IMDB Plugin not working correctly - This is a problem with the original plugin, and as soon as an update is posted which fixes this, it will be made available via an online update...
        * Motor moving image does not display - Problem with main driver, reported to VU+.
        * Front VFD display showing the play button at the end of a video unless it is stopped manually - Problem with main driver, reported to VU+.
        * ECM time on second info bar in skin is not currently shown - New version of CCcam needed for OE1.6. (libgcc_s.so fix is unstable).
        * Installing other skins may cause the box to get into an infinite loop. Only skins in the feed are tested and recommended by us. If you want to use other skins, you will need to use OE1.6 skins (i.e. those created for VTI 2.0 or later), and may need adapting for the image (espcially in terms of the CCcam info displaying on the second info bar)...


        Size: 39.33MB
        Download USB Image:
        _www.mediafire.com/file/nbfys9182bb9bny/VIX_V1.0_solo_Team_Image.zip"]http://www.mediafire.com....VIX_V1.0_solo_Team_Image.zip

        Comment

        • mikeydm500s
          Newbie
          • Mar 2010
          • 6

          #34
          SIF Team Enigma2 Extreme Edition

          Italian Team of the SIF have their first picture out ... Solo and Duo VU +!
          You can download the image here:
          _http://enigma2.sifteam.eu/index.php?dir=Enigma2_SifTeam_Extreme_Edition_for_ Vuduo/r89/

          Comment

          • EUROASTRA
            Experienced Board Member
            • Sep 2010
            • 1198

            #35
            Re: Vu+ SOLO

            Black Hole oe1.6 Image for Vuo+Duo


            HTML Code:
            Specifications:
            
            - Based on the new official verion 5.3
            
            -OE 1.6
            
            - New Skin White Hd by Army
            
            - New Boot logo by Army
            
            WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot.
            The image MUST be installed in the flash.
            Black Hole can not support images not installed in the flash.
            
            This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance.
            
            Please note that of all images Black Hole now has the best epg system:
            - Integrated OpenEpg
            - New system epg.dat outside.
            This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space.
            Community members can then download it from our servers.
            This feature provides other benefits such as:
            Increase download speed of EPG
            Download EPG from any channel
            Schedule the download of EPG decoder even during standby
            Users can customize the providers using Add / Remove function
            
            Main functions of the buttons on the remote
            
            OK button = Skin with simple information
            OK button x 2 = Extra Info Skin
            Blue button = Black Hole Blue Panel
            Blue button and then Red button = Black Hole Epg Panel
            Blue button and then Yellow button = System Monitor Panel
            Blue button long press = Extensions
            Yellow button = Time Shift
            Green button = Black Hole Green Panel
            Green button long press = Subservices
            Green button and then Red button = Fast Plugin Setup
            Green button x 2 = Fast Plugin
            Button Red = Start Record
            
            Addons
            
            Green button and then Yellow button takes you to:-
            Dedicated server for BlackHole addons
            Download and install additional packages from the Black Hole server
            
            Infobar / OSD
            
            Analog Clock Enigma2
            Channel orbital location
            
            Advanced Tuner Info: Sr Freq Pol Fec
            Signal SNR, BER
            Infobar picons
            
            Characteristics of BlackHole Panels
            Blue Panel
            Extra Settings
            
            Black Hole Cron Manager (Manage schedules)
            OSD Settings (OSD configuration)
            Manager Kernel Modules (Kernel module operator)
            Inadyn Settings (Configure Inadyn)
            Swap File Settings (Configure File Swap)
            Hard Disk Settings (Configure Hard Drive)
            Black Hole Mount Wizard (Mount points)
            OpenVPN Panel ( OpenVPN Panel)
            Samba / CIFS Panel ( Samba Panel)
            NFS Server Panel ( NFS server Panel)
            Telnet Panel ( Telnet Panel)
            FTP Panel ( FTP Panel)
            Usb Tuner Panel
            
            Info Panel
            1 - E2 Setting (Enigma2 configurations)
            2 - Service Information (information system)
            3 - About (info)
            Memory (Memory)
            Space (capacity)
            CPU (processor)
            Process (process)
            
            EPG Panel
            Global settings (global settings EPG)
            Setting Provider (ISP settings)
            
            Green Panel
            
            Fast Plugin Setup (Configure quick access to your favourite plugin)
            
            Fast Plugin (Access your favourite plugin)
            
            Addons (added)
            Addons Download Manager (Manager for package downloading)
            Installation manual packages (Manual installation of Black Hole packages)
            Manual Install IPK packages (Manual installation of IPK packages)
            Addons Uninstall Panel (Uninstalled packages)
            Black Hole Statistics (See connections, top downloads and more)
            
            
            Credits
            Thanks to the group of Beta Testers.
            Thanks to Rytec for providing us with the server with all epg.dat files.
            Thanks to MaxZ4 for Integrated EPG loader.
            Thanks to Llukkino (VDR-Italy) for the source code of OpenTV.
            Thanks to Reinh@rd for the file satellites.xml.
            DOWNLOAD NFI IMAGE
            _http://www.sendspace.com/file/o1zzpc
            _http://www.megaupload.com/?d=YFXUNFP1
            Attached Files
            Please read the Forum Rules
            Problems and questions in PM! I'll not answer!

            Comment

            • EUROASTRA
              Experienced Board Member
              • Sep 2010
              • 1198

              #36
              Re: Vu+ SOLO Update

              SifTeam_Enigma2_Extreme Image for Vuo+Duo
              VU+ Duo Images

              _http://www.megaupload.com/?d=FARJDJUD
              Please read the Forum Rules
              Problems and questions in PM! I'll not answer!

              Comment

              • sonc
                Experienced Board Member
                • Jun 2010
                • 1568

                #37
                Re: Vu+ SOLO Update

                BlackHole Vu+ Solo v. 1.3.6 - oe 1.6

                *** This is the version for the SOLO - the version above posted by Euroastra is for the DUO ***

                Specifications:

                - Based on the new official version 5.3

                -OE 1.6

                - New Skin White Hd by Army

                - New Boot logo by Army

                - Driver updated to 20101008

                WARNING: This Image has the latest drivers and CAN NOT be installed in multiboot.
                The image MUST be installed in the flash.
                Black Hole can not support images not installed in the flash.

                This latest version of the Black Hole series has been entirely rewritten and improved in the code for maximum stability and performance.

                Please note that of all images Black Hole now has the best epg system:
                - Integrated OpenEpg
                - New system epg.dat outside.
                This last feature gives the possibility to various forums or communities to create their favorite EPG data files and load them into a web space.
                Community members can then download it from our servers.
                This feature provides other benefits such as:
                Increase download speed of EPG
                Download EPG from any channel
                Schedule the download of EPG decoder even during standby
                Users can customize the providers using Add / Remove function

                Main functions of the buttons on the remote

                OK button = Skin with simple information
                OK button x 2 = Extra Info Skin
                Blue button = Black Hole Blue Panel
                Blue button and then Red button = Black Hole Epg Panel
                Blue button and then Yellow button = System Monitor Panel
                Blue button long press = Extensions
                Yellow button = Time Shift
                Green button = Black Hole Green Panel
                Green button long press = Subservices
                Green button and then Red button = Fast Plugin Setup
                Green button x 2 = Fast Plugin
                Button Red = Start Record

                Addons

                Green button and then Yellow button takes you to:-
                Dedicated server for BlackHole addons
                Download and install additional packages from the Black Hole server

                Infobar / OSD

                Analog Clock Enigma2
                Channel orbital location

                Advanced Tuner Info: Sr Freq Pol Fec
                Signal SNR, BER
                Infobar picons

                Characteristics of BlackHole Panels
                Blue Panel
                Extra Settings

                Black Hole Cron Manager (Manage schedules)
                OSD Settings (OSD configuration)
                Manager Kernel Modules (Kernel module operator)
                Inadyn Settings (Configure Inadyn)
                Swap File Settings (Configure File Swap)
                Hard Disk Settings (Configure Hard Drive)
                Black Hole Mount Wizard (Mount points)
                OpenVPN Panel ( OpenVPN Panel)
                Samba / CIFS Panel ( Samba Panel)
                NFS Server Panel ( NFS server Panel)
                Telnet Panel ( Telnet Panel)
                FTP Panel ( FTP Panel)

                Info Panel
                1 - E2 Setting (Enigma2 configurations)
                2 - Service Information (information system)
                3 - About (info)
                Memory (Memory)
                Space (capacity)
                CPU (processor)
                Process (process)

                EPG Panel
                Global settings (global settings EPG)
                Setting Provider (ISP settings)

                Green Panel

                Fast Plugin Setup (Configure quick access to your favourite plugin)

                Fast Plugin (Access your favourite plugin)

                Addons (added)
                Addons Download Manager (Manager for package downloading)
                Installation manual packages (Manual installation of Black Hole packages)
                Manual Install IPK packages (Manual installation of IPK packages)
                Addons Uninstall Panel (Uninstalled packages)
                Black Hole Statistics (See connections, top downloads and more)

                Credits
                Thanks to the group of Beta Testers.
                Thanks to Rytec for providing us with the server with all epg.dat files.
                Thanks to MaxZ4 for Integrated EPG loader.
                Thanks to Llukkino (VDR-Italy) for the source code of OpenTV.
                Thanks to Reinh@rd for the file satellites.xml.

                DISCLAIMER

                THE BLACK HOLE IMAGE IS BASED ON THE OFFICIAL FIRMWARE PULBISHED BY VU+ AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.


                THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY EMULATOR, ****, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.


                LASTLY, THE BLACK HOLE IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR IILEGAL PURPOSES SUCH AS CARD SHARING.

                LICENSE (TERM OF USE)

                THE BLACK HOLE IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.

                ANY CHANGES OR ADDITIONS TO BLACK HOLE IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE IN CONFLICT WITH THIS LICENSE.


                Size 36.7MB

                Download USB image:
                _http://www.mediafire.com/file/dicjy2cgzy88vcq/BlackHole_VUSOLO_13A_USB.zip

                Comment

                • gregorii
                  Premium Member
                  • Jun 2010
                  • 951

                  #38
                  Re: Vu+ SOLO Update

                  BlackHole Vu+ Solo v. 1.3.7 - oe 1.6

                  WHAT'S NEW?

                  - Added wifi support
                  - NEW: color terminal
                  - fixed: Midnight Commander consolle file manager
                  - fixed crash bug in System Info

                  DOWNLOAD NFI IMAGE
                  _http://hotfile.com/dl/80668492/064e194/BlackHole_VUSOLO_137_NFI.zip.html


                  DOWNLOAD USB VERSION
                  _http://hotfile.com/dl/80671944/9ad41da/BlackHole_VUSOLO_137_USB.zip.html
                  Attached Files

                  Comment

                  • EUROASTRA
                    Experienced Board Member
                    • Sep 2010
                    • 1198

                    #39
                    Re: Vu+ SOLO Update

                    Power of Dream HD+ 2.0 (POD HD+) for Vuo+Solo


                    08/11/2010

                    - Added support for mhw-epg
                    - Enigma2 version 30/11/2010
                    - Enigma2 skins version 30/11/2010
                    - Enigma2 plugins version 30/11/2010

                    List enigma2 :_http://git.opendreambox.org/?p=enigma2.git;a=log;h=refs/heads/experimental

                    Listopendreambox-1.6 : _http://git.opendreambox.org/?p=openembedded.git;a=log;h=refs/heads/opendreambox-1.6

                    solo_usb_upgrade 08-11-2010.zip _http://hotfile.com/dl/81083856/ce734f7/solo_usb_upgrade.zip.html
                    Please read the Forum Rules
                    Problems and questions in PM! I'll not answer!

                    Comment

                    • EUROASTRA
                      Experienced Board Member
                      • Sep 2010
                      • 1198

                      #40
                      Re: Vu+ SOLO Update

                      Power of Dream HD+ 2.0 (POD HD+) for Vuo+Solo

                      09/11/2011

                      Update card manager:

                      - Fixed French CSAT HD on VIA cards
                      - Fixed French TNTSAT SD
                      - Fixed French TNTSAT HD

                      Download _http://hotfile.com/dl/81403605/89bcd36/solo_usb_upgrade.zip.html
                      Please read the Forum Rules
                      Problems and questions in PM! I'll not answer!

                      Comment

                      • runmo
                        Experienced Board Member
                        • Jun 2010
                        • 6123

                        #41
                        Re: Vu+ SOLO Update

                        BlackHole Vu+ Solo v. 1.3.8 Multiboot

                        WHAT'S NEW?


                        - New Embedded MeoBoot x Vuplus version 0.99

                        - MeoBoot devices Usb & Hdd

                        -Fixed bug in Device Panel Usb Formatting



                        WARNING BEFORE TO INSTALL MEOBOOT ON USB DEVICE YOU HAVE TO:
                        1) FORMAT USB STICK IN BH DEVICE PANEL
                        2) MAP USB STICK IN BH DEVICE PANEL


                        About MeoBoot


                        What is MeoBoot:
                        MeoBoot is very light Multiboot tool for Enigma 2 images.


                        System requirements:

                        This version of MeoBoot is exclusive for Vu+ machine with Usb pen Drives.
                        MeoBoot only accepts devices formatted in Linux ext filesystem and this to ensure the best performance in Vu+ native environment.


                        Operation:

                        MeoBoot is very simple and intuitive. The plugin includes an Help button, explaining where to upload images before install and how to remove it.


                        To install MeoBoot into your VU+ Solo:

                        1) Insert your USB stick in VU + Solo
                        2) From your receiver go to the plugins list
                        3) Green button for devices
                        4) Red button to install it and after restarting the plugin


                        To install an image in Multiboot with MeoBoot:

                        WARNING: YOU CAN INSTALL IMAGES IN MULTIBOOT IN .NFI FORMAT
                        1) Upload th image file ***x.nfi in: /media/ meoboot/MbootUpload /
                        9) Red button to install the image
                        10) Wait a few minutes until the procedure will be complete and your Vu+ Duo will be autamatically reboot.

                        Warning Multiboot on Vu+ Solo could be very slow because of Usb drivers. We hope that Vuplus will solve soon this issue.

                        downloadlink : _http://www.vuplus-support.co.uk/showthread.php?3681-BlackHole-Vu-Solo-v.-1.3.8-Multiboot&p=26552#post26552

                        regards
                        runmo

                        Comment

                        • EUROASTRA
                          Experienced Board Member
                          • Sep 2010
                          • 1198

                          #42
                          Re: Vu+ SOLO Update

                          solo_usb_upgrade
                          Updating of the administrator of card in 2.09

                          --------------
                          Release 2.08
                          --------------
                          => Fixed ***

                          --------------
                          Release 2.09
                          --------------
                          => Fixed some compatibility bugs for PPC platforms and *** support
                          => Changed VIA EMM operations. Hope this will help for some people experiencing trouble with updates

                          Download _http://hotfile.com/dl/81687507/18a890d/solo_usb_upgrade.zip.html
                          Please read the Forum Rules
                          Problems and questions in PM! I'll not answer!

                          Comment

                          • lulezim
                            Banned
                            • Mar 2010
                            • 4081

                            #43
                            Re: Vu+ SOLO Update

                            enigma2-plugin-glasssysutil_2.40_mipsel.ipk VU+Duo



                            _http://www.sendspace.com/file/y0av1e

                            Comment

                            • sonc
                              Experienced Board Member
                              • Jun 2010
                              • 1568

                              #44
                              Re: Vu+ SOLO Update

                              Official original image Ver. 5.4

                              This Release Includes:

                              - Fix wrong video size/framerate information
                              - Upgrade Linux DVB API driver to version 5(can be used with latest E2)
                              - Change dvb-core to use v4l-dvb(with additional patch)
                              - Change LED Color at standby(solo)
                              - Support vtuner at solo
                              - Fix vtuner audio/video sync problem
                              - Clean up and fix misc. bugs at vtuner driver
                              - Fix USB transfer problem when both front and rear ports are in use simultaneously (solo)
                              - Disable HDMI hotplug at standby

                              Size: 34.16MB
                              Download USB image:
                              _http://www.mediafire.com/file/cilxrd3aldr8ula/Official_solo_usb_upgrade.zip

                              Comment

                              • EUROASTRA
                                Experienced Board Member
                                • Sep 2010
                                • 1198

                                #45
                                Re: Vu+ SOLO Update

                                AAF OE1.6 V5.4 Image VU+ SOLO

                                HTML Code:
                                Vuplus Experimental
                                
                                
                                Driver update
                                
                                20101008
                                
                                - Fix wrong video size/framerate information
                                
                                20101111
                                
                                - Upgrade Linux DVB API driver to version 5(can be used with latest E2)
                                - Change dvb-core to use v4l-dvb(with additional patch)
                                - Change LED Color at standby(solo)
                                - Support vtuner at solo
                                - Fix vtuner audio/video sync problem
                                - Clean up and fix misc. bugs at vtuner driver
                                - Fix USB transfer problem when both front and rear ports are in use
                                simultaneously (solo)
                                - Disable HDMI hotplug at standby
                                
                                20101118
                                
                                - fix streamproxy
                                
                                
                                AAF:
                                
                                + AAF-Panel
                                + Volume Adjust with AC3 support
                                + BlueKey Action (Default/Softcam/single EPG/multi EPG/graphic EPG/My**** Player/AAF-Panel/other extension)
                                + RedKey Action (Default/AAF-Panel)
                                + GreenKey Action (open Plugin Browser when no subchannels)
                                + Grab (credits to scope34 Vu+ Team)
                                + default skin DMConcinnity-HD (credits to Mister-X)
                                + BrushedAlu-Coolman-Blackmod V2.03 skin (credits to Coolman)
                                + Addon-Manager V2.09
                                + FanControl
                                + WirelessLan
                                + Upnp
                                + Usb-Serial drivers (smargo and others)
                                + Backup/Restore Image (credits to scope34 Vu+ Team)
                                + webremote VU+ picture
                                + My**** fix from 28/08/2010
                                + Rytec EPG
                                + Cool TV Guide V2.1.3 by Coolman
                                + AAF-Spinner
                                + Setup Infobar
                                + YellowKey Action (Audio Selection/Default(Timeshift))
                                + Graphicle AAF-Panel
                                + CrossEPG
                                + epgcache patch
                                + enable MHW EPG
                                + EasyMedia by Vali
                                
                                Euer AAF Team

                                DOWNLOAD NFI VERSION:
                                HTML Code:
                                http://hotfile.com/dl/84529202/3d1d1a7/AAF_OE1.6_V5.4_solo_final.nfi.html
                                DOWNLOAD USB VERSION
                                HTML Code:
                                http://hotfile.com/dl/84529278/2a074eb/AAF_OE1.6_V5.4_solo_final.zip.html
                                Please read the Forum Rules
                                Problems and questions in PM! I'll not answer!

                                Comment

                                Working...