Vu+ SOLO Update

[EUROASTRA]

With this high-end open-source Linux HDTV PVR receiver they can be both high resolution and conventional television set to receive.
DVB-S2 and Cartridges, 2x Common Interface, 1x Conax Card Reader u.XCrypt, EPG, LAN ...

Digital HDTV Satellite Receiver PVR Ready
Open-source Linux operating system (Enigma2)
2 x CI slot, 1x Conax Cardreader,
Standby Power Consumption 0.5 watts

- Open-source Linux operating system (Enigma2)
- Broadcom Mips Processor 333 Mhz
- DVB-S2 Tuner
- MPEG2 / H.264 Hardware decoding (DVB compliant)
- 2 x CI slot (Alpha Crypt, Cryptoworks, Viaccess, Seca, Conax, ...)
- 1x Smartcard reader (Conax Embedded)
- 2 x USB2.0 Back
- 10/100 Mbit Ethernet Interface
- 1 x V.24/RS232
- 1 x HDMI port
- 1 x Scart
- 1 x YPrPb
- 1 x S / PDIF optical digital audio transmission ()
- 1 x RCA Video
- 2 x RCA Audio (L / R)
- Channel-change time <1 seconds
- MP3 player and JPEG picture viewer
-) Plugin support (JPEG, MP3, XVID ...
- EPG (electronic program guide)
- Support of Bouquet lists
- Multi language OSD, Skin - Support
- Fully automatic, manual channel search
- Teletext
- DiSEqC 1.o, 1.1 and 1.2
- Power consumption working / standby 35W/0.5 Watt

_http://archive.vuplus.com/download_5.1/
_http://archive.vuplus.com/download_5.1a/

_http://img94.imageshack.us/img94/2227/nuovo1u.gif

[EUROASTRA]

Re: Vu+ SOLO

Bootlogo changed.
- Choose language was Turkish.
- LNB Input: Diseq A / B / C / D - Turksat / Hotbird / w3
- Enable the Use Multiple Bouquets: yes
- Information Bar Timeout Duration: 3 seconds
- Time Zone: GMT +2 "New York"
- Interface: DMConcinnity-HD & Elgato-HD
- The Telnet and FTP password: "vusolo" was set. Telnetten "passwd" command to the device's password, be sure to give
change.
- Startup Service plug-in be installed at boot time settings for the proper functioning of the D channel is configured in the future.
- Request a password for the webinterface plugin activated.
- Videomode plug-in device "Audio and Video settings," DVI-Justscale and transparency is set up.
- CCcam 2.1.3 installed, your own cfg file via FTP / etc folder at the bottom and you can use.
- @ Galaxy2002'nin prepared by setting the motor was installed.
- Transparent HD Picon package has been installed.
- Added Paulikeymap.
- Added My**** Player.
_http://rapidshare.com/#!download|837|414033080|vusolo_backup_pro_dufa_nf i_20082010.zip|44457
_http://rapidshare.com/#!download|456|414035082|vusolo_backup_pro_dufa_us b_20082010.zip|44458

[EUROASTRA]

Re: Vu+ SOLO

All Skins for VU+Duo

dTV-HD-Reloaded_für_VTI_Image_1.0

HDTV-HD Reloaded for vu + duo have some time on the last Infobar and

- Added Crypt-Info in Infobar
- ECM Info
- Info bar with satellite and transponder information

Simply FTP to the box ipk to / tmp

install by VTI Panel -> ipk / tar.gz installer

or install via telnet:

ipkg install / tmp / *. ipk

[EUROASTRA]

Re: Vu+ SOLO

Vu plus link support:
_http://www.vuplus-support.com/

[sonc]

Re: Vu+ SOLO

If your German is not too good (like mine ), then there is also a forum in English:

_http://www.vuplus-support.co.uk/

[EUROASTRA]

Vu plus - duo

Skin: Magic-EHD (Extreme-HD) Vs 2.53 by VU+NL, based on Magic_HD Vs 1.14 but now in "real-HD"

[EUROASTRA]

Re: Vu+ SOLO

VU-DUO Toolbox
_http://www.multiupload.com/RS_FWN1UK7EGP/
_http://www.multiupload.com/MU_FWN1UK7EGP/

[EUROASTRA]

Re: Vu+ SOLO

dreamset 229
easy channel editor works great with vu+

[EUROASTRA]

Re: Vu+ SOLO

TooLVu+ Version 1.0

This program includes several tools for Vu+

Usage:
1) run program (toolVU.exe)
2) Choose the tool

tool included :

- DreamLogo Generator
- DreamBox Edit
- VuSettings Backup
- e2skinner
- Vu Util
- DreamMaker
- Putty
- Filezilla

note:This tool is portable, can be used from a USB stick

[EUROASTRA]

Re: Vu+ SOLO

dreambox control center

connect to vu+ with ftp and telnet.
go to telnet type passwd (yes in telnet type passwd not password)
type new password and press enter.
and to confirm type new password again and enter.
remember your new password.

[EUROASTRA]

Re: Vu+ SOLO

Tutorial for meoboot using Barry Allen that work smoothly

For those interested in meoboots for OE 1.6 images here is a short guide. Hope it will be of help.

1/ in flash (internal Flash) install AAF_HOT_SUMMER_V2_final version

Usb. in the usual manner using the front usb port.
2/ once installed. Switch off Vu+from back using the power button.
3/ Get a usb stick and format it using the hp format utiliy to FAT 32.
4/ While Vu+ is still switched off, insert the formatted usb stick in the

lowest usb port in the back of your Vu+.
5/ Power on Vu+ using again the power button in the back of Vu+.
6/ After a while the AAF_HOT_SUMMER_V2 will appear on your screen.
7/ Go to to Add on Manager and under plugins install Barry Allen Version

5.1.15.
8/ After completion of installation of Barry Allen, Use dcc296 and go to

/media/hdd/MB_Images
this is in case you donot have neither an internal nor external Hardrive

disks. If you have any one of them then Go to /media/USB/MB_Images.
9/ Once in in MB_Images , Ftp your meoboot image to MB_Images and

give it a CHMOD 755.

10/ Now go to Vu+ > plugins> Barry Allen click it and a screen will appear

go to

(Wizard for images at / MB_Images click it and a screen will appear,

Choose
( Extract nfi image from /MB_Images, Click it another screen appears ,

Here you will select the image which you transferred to MB_Images.

Choose the image and Rename it as you want and the press OK.

the process of extraction or installing will start. Upon completion you will

see the screen of the Flash image.

11/ Now go to plugins > Barry Allen click it> Choose (Wizrd For installed

images) click it> Choose (Select installed image for booting ) click it and

select your Meoboot image and press OK.

12/ Vu+ will reboot automatically and after several minutes your Meoboot

image will appear on screen.
You can repeat the same procedure to install as many images as you like

provided all images are compatabilwith the Flash image,. In this case all

images should be the new versions of VTi 2/Gigant 2 etc. They all must

have OE 1.6 otherwise the system wont work.

Important Notice: Open Pli images do not work with this system because

of O.E compatibility issues.



Regards

[gaivan]

Re: Vu+ SOLO

Guys please make me understand. Vu is as good as DM?
I just want to change my old DM500.
First option is DM800 but looking at these thread I understand that Vu can be the alternative.

[EUROASTRA]

Re: Vu+ SOLO

Guys please make me understand. Vu is as good as DM?
I just want to change my old DM500.
First option is DM800 but looking at these thread I understand that Vu can be the alternative.

To find tons of information.DreamBox fewer yet VU
VU DUO is an alternative since it is meant to be competing with to see if they succeed DREAMBOX.
Remains to be seen if they succeed

[sonc]

Re: Vu+ SOLO

Guys please make me understand. Vu is as good as DM?
I just want to change my old DM500.
First option is DM800 but looking at these thread I understand that Vu can be the alternative.

As well as this thread, there is info on the Duo and Solo here:

http://www.satlover.com......re-vu-duo.html


It is based on enigma2 like the DM so is a good alternative.

Also here:

http://www.satlover.com/..../vu-duo-official-brochure.html

[EUROASTRA]

Re: Vu+ SOLO + DUO

VU+ Duo Addons, Tools and Other files
E2 TRRPlugin v0.1 Beta