begining with local

[blaska]

Hi,
I'm obout to start as a server without a local card.
I'm familiar with cccam only as a client.
Do I need anything else besides Cccam? I mean is cccam capable of reading and share or do I need something like newcs or sbox for the reading card part?

thanx a lot.

[tonybod]

Re: begining with local

I've moved this thread to the VU section as you will need someone from there to reply. The answer will be different for every box (on my receiver I need to run newcs as well as cccam).

In short, if cccam can read the card on your receiver, you will not need to do anything else apart from redirect a port on your router to the port on your receiver.

[blaska]

Re: begining with local

Ok, thank u Tony.
Lets see What other vu dúo owners say.

[uttnls]

Re: begining with local

Hi,
I'm obout to start as a server with a local card and a Vu duo.
I'm familiar with cccam only as a client.
Do I need anything else besides Cccam? I mean is cccam capable of reading and share or do I need something like newcs or sbox for the reading card part?

thanx a lot.

It depends of your card, some of them can be readed using only oscam or newcs.

And yes CCcam can read some type of cards.

Also keep in mind that if you intend to have lots of users then you should consider a linux PC in conjunction with cardreaders

[blaska]

Re: begining with local

my Intention is To form a group of 10/15 peers.

[uttnls]

Re: begining with local

my Intention is To form a group of 10/15 peers and My card is a v10 spanish D+

For that you'll need to use oscam or newcs, i recomand oscam

You won't be able to read a N3 card with cccam, also keep in mind that for that specific card you'll need t RSA and BK from the reciver firmware.

Good luck

[blaska]

Re: begining with local

I think you are wrong. There are 2 types of D+ cards V10 and rom180
For the Rom180 N3 you need BK and RSA as you said.
For v10 I don't need it cos is a seca card (I think)

Bad news is I can get HD chanels with V10

Tarjetas soportadas por CCcam

Tarjetas leídas por CCcam DIRECTAMENTE:

- AKTA (ex Max-Tv) (Romania, on 4,8°, Viaccess [which version??]) card works in CCcam on DM500 but doesn't make AU.
- ABS-CBN (Irdeto2, CAID 0604 ACS605)
- AlJazeera Sport (Irdeto, CAID 603, ACS 606)
- AyngaranTV (viaccess)
- ART international (North Africa, viaccess 2.6, 500:21110)
- ART 7W (Irdeto, CAID 604, ACS 505)
- ArenaSat Cryptoworks (Problems with Youghtprotection Code)
- Bulsatcom (Irdeto2 Caid 604 ACS 605)
- BSkyB (UK, NDS2 - blue card, read directly on DM 500, 7000, 7020 and 7025 and now also DM800 and 600)
- BHTV (16E, viaccess)
- Bis TV ( viaccess France )
- Canal Digitaal (Netherlands, Seca 3 v10)
- Canalsat + TPS (France, viaccess 3.0, CAID 0038)
- Canal+ (France, Viaccess 3.0)
- Canal+ Maghreb ( Maghreb, viaccess 500:41140)
- Cyfra+ (Poland, Seca3 v10)
- DeepamTV (viaccess)
- Digital+ tunneled Seca (aka v10)
- Digiturk (Cryptworks? )
- DigiTurk 7E (Cryptoworks, REV5, CAID d00)
- Digiturk (Irdeto2 Caid 604 ACS 605 work ok - new v5.7 card acs608 is NOT working on ANY cardsharing)
- Digitalb (Albania, Conax CAS5 and CAS7, HD channels use CAS7 only and do NOT work with any CS sw)
- Dolce TV (Romania, NDS)
- Dorcel / FreexTV / Xdream (Viaccess)
- Focussat (Romania, Conax) at 0,8W, make AU
- Hayat TV (13E, viaccess)
- HRT (Viaccess 3.0)
- HTB (Russia, works ok with both CCcam version 10 and 11)
- ITV Partner (Cryptoworks card bios rev 3)
- JSC Sport (North Africa, viaccess 3.0, 500:30700)
- KabelDeutschland (Germany, Nagra3, Rom?)
- Kabelkiosk (Conax)
- Martens (Conax)
- Meo (Portugal, Seca3 V10)
- MCT (Viaccess version?)
- MCT (Irdeto version?)
- MTV Unlimited (Conax version?)
- Nova (Irdeto version?)
- Orbit 26W (Irdeto, CAID 668, ACS 606)
- ORF (Cryptoworks, REV3)
- Premiere (Germany, Nagra3, Rom 181)
- Premiere (Germany, NDS, V13)
- Private Spice (Viaccess version?)
- Private Spice (Irdeto version?)
- Raduga TV (Russia 75E, Irdeto2 v5.7 ACS608)
- RTvi (Russia 13E, viaccess [which version??])
- Svt Europa 9E (Viaccess)
- SRG (Viaccess 2.6)
- *** On Tv (Viaccess version?)
- *** On Tv (Irdeto version?)
- ***View (Viaccess version?)
- ***View (Irdeto version?)
- ***View (Conax version?)
- SkyLink 23,5E (Cryptoworks Rev6, CAID D03)
- Sky Italia (Italy, NDS 2, CAID 0919)
- Sky Italy (Italy, NDS3, CAID 093B works directly on cccam as of version 2.1.0)
- Showtime 7W (Irdeto, CAID 604, ACS 605 - new card v5.7 NOT working in sharing)
- Telesat (Belgium - Seca 2 - CAID 100:6d)
- TotalTV ( Serbia, Nds )
- TV Vlaanderen (Belgium, Seca 3 v10)
- Viasat 5E (Scandinavia, NDS2, CAID 90F - new card NDS3 does not work in sharing yet. HD channels also don't work in sharing.)


Tarjetas que trabajan con CCcam solo si las lee via NewCS:

- BskyB (UK, NDS3 - new white card - CAID 0963 - works only with newcs version 1.66)
- D+ (Spain, N3, Rom 180)
- DigiTV (Romania, N3, Rom 142?)
- NTV+ (Russia, Viaccess 2.6?)
- Polsat (Poland, N3, Rom 142?)
- RUV (Iceland 0b01)
- Tring (Albania,Conax)
- Tntsat(France, viaccess3, 30b00 (19))
- Zon Tv Cabo (Portugal, N3, Rom 142)

Tarjetas que NO trabajan en sharing:

- Cabovisao Portugal HD & SD - Conax CAS7
- Digitalb Albania HD - Conax CAS7
- Digiturk Turkey - Irdeto v5.7
- Showtime - Irdeto v5.7
- Viasat Scandinavia HD - NDS
- Boom TV Romania - NDS
- Vision TV Ukraine - NDS

[uttnls]

Re: begining with local

Very good, then the only thing to worry is about if a vu duo will be stable with 15-20 clients.

Also what type of internet do you have, i suppose is ADSL, at which upload speed ?

[User1]

Re: begining with local

I don't think newcs works on the Vu+ anyway...

I've found depending on what card you want to use depends on the Cam you will required.

So far not had much probelms with Oscam in getting cards to read.