Vu+ Duo Tuner settings

[lotuselite]

I have a fixed dish with twin lnb. What are the correct settings for setup>service searching>tuner configuration>Tuner A

I have:

Configuration mode - simple
mode - diseqc a/b
Port A: 28.2e etc
Port B - nothing connected
Set Voltage and 22kHz - yes
Send Diseqc only on satellite change - no

Tuner B is set equal to tuner A

This setup is working ok but I'm not sure what Port A and B mean, and if set voltage needs to be yes or no. Thanks in advance for guidance.

[galingo]

Re: Vu+ Duo Tuner settings

[QUOTE=lotuselite;268829]I have a fixed dish with twin lnb. What are the correct settings for setup>service searching>tuner configuration>Tuner A

I have:

Configuration mode - simple
mode - diseqc a/b
Port A: 28.2e etc
Port B - nothing connected
Set Voltage and 22kHz - yes
Send Diseqc only on satellite change - no

Tuner B is set equal to tuner A

This setup is working ok but I'm not sure what Port A and B mean, and if set voltage needs to be yes or no. Thanks in advance for guidance.[/QUOTE]

set voltage and 22 khz - no

if you need only the satellite 28 east, configure the tuner equal.

if you don t use diseqc swich you don t need specify port a or port b.

[lotuselite]

Re: Vu+ Duo Tuner settings

Just found out that if I set mode - single, all the disceq options disappear. Problem solved.