Set up cline

[digicon]

Re: Set up cline

[QUOTE=mickr;215320]this the line I added to the CCcam.cfg file
C: cccam.satlover.com 10559 51EDB2CC_5469F3D8 www.satlover.com no { 0:0:3 }
This is what shows up when I press show servers button
cccam.satlover.com 10559 51EDB2CC_5469F3D8 www.satlover.com no { 0:0:3 }
then when I press show clients
the screen pops up but is blank

Mickr[/QUOTE]



When you press show clients that is correct because you have no clients you are receiving information from a server that is why satlover shows up in the servers page.

A client would show up if you where sharing a card with someone else, Dont get them mixed up.

So say you where sharing your card with your mate across the street then the line you sent him would show up in the Client page.

Everything else you have done correctly.

[mickr]

Re: Set up cline

Thanks for that Digicon , I imaged that I would be able to see tv channels that I could connect to. So all the free clines are for you to set up your own connection with a friend who agrees to connect with you or vice versa. Is that also true of the servers in the premium membership. There seems to be a lot to take in with linux receivers. I have managed to set up the motorised dish o\k all be it that some times when I go to another satellite it does not appear to lock on it and I get the flashing dish, I then have to send the dish to goto 0 and resent to the satellite in question and it ok. I have checked the signal strength on the satellites and they all appear quite good.

with thanks
Mickr

[bokkie]

Re: Set up cline

[QUOTE=mickr;215525]I have managed to set up the motorised dish o\k all be it that some times when I go to another satellite it does not appear to lock on it and I get the flashing dish, I then have to send the dish to goto 0 and resent to the satellite in question and it ok. I have checked the signal strength on the satellites and they all appear quite good.

with thanks
Mickr[/QUOTE]

I am getting the same problem as you. I am in contact with the seller of my clone duo to try and resolve this issue. He seems to think it is a software conflict and advised me to use blackhole 1.6.6.
I am going to install it tomorrow and see how it goes.
I sometimes even have to reboot the reciever before the dish will move and lock on.
There seems to be a couple of people with this problem on other forums as well.

[mickr]

Re: Set up cline

I was going to try switching usals off and setting up manually, but it would take quite a while. I may give it a try offer weekend.I am using blackhole 1.7.3

Mickr

[bokkie]

Re: Set up cline

I've been using vix 2.3 and blackhole 1.7.2.
Will try blackhole 1.6.6 over the weekend and see how it goes.

[digicon]

Re: Set up cline

Well My clone has been working fine since day one with USALS and i have tried nearly every image that has come out so it cant be an image problem

[bokkie]

Re: Set up cline

[QUOTE=mickr;215554]I was going to try switching usals off and setting up manually, but it would take quite a while. I may give it a try offer weekend.I am using blackhole 1.7.3

Mickr[/QUOTE]

I tried. Blackhole 1.6.6 but still had the same problem. Could I ask you what motor you have Mick?
I remember reading that the openbox had compatability issues with certain motors. I'm beginning to wonder if the clone duo has the same problem.

[digicon]

Re: Set up cline

It wont be a motor issue either i have tried Darkmotor,technomate,Nikkai and Motek and they have all worked with the clone.

[damiensk]

Re: Set up cline

ive not heard of an image having a problem moving a dish, but it may be a power issue.
i was given a eagle box to sort out, but it had issues with moving dish, not enough juice coming out of the box.
dont think the power adapter kicked enough out.

now that might not be the case with the duo, but just throwing it out there.

[bokkie]

Re: Set up cline

[QUOTE=damiensk;218364]ive not heard of an image having a problem moving a dish, but it may be a power issue.
i was given a eagle box to sort out, but it had issues with moving dish, not enough juice coming out of the box.
dont think the power adapter kicked enough out.

now that might not be the case with the duo, but just throwing it out there.[/QUOTE]

The bloke I got my clone from has acknowledged that there is a problem.
He is getting a delivery of the latest revision of clones and has agreed to exchange mine for a new one.
Hopefully that'll sort it.

[toby69]

Re: Set up cline

that chap bokkie exchanging your box, has he verified the problem , perhaps would be useful for others to know, keep site informed.

[bokkie]

Re: Set up cline

Yes he has. He is a british reseller and says he's had the problem with a couple of clones. Took a few weeks of me emailing him and he eventually agreed.