Tweet
Starsat SR 2000 hd And Oscam plug
If you want to enable oscam plug in startsat sr 2000 hd.you make this.
1-press f1+345
2-turn off to on in the first window and press ok
3-turn off to on in the 2 window and press ok.
the oscam plug is actived
If you want to disable oscam plug you make the same steps.but turn on to off
and press ok in the two windows.
If you want to enter in the receiver by pc.
1 - disable All cas data clicking f1 ===> 000
2 - Runs oscam plug pressing f1 ===> 345
Window appears, turn off to on then ok
Other window appears turn also off to on then ok
Now been running oscam and must log in to the device to add cccam server
Go to the IE browser on the computer and write ip device followed by port as follows
Is so often the last number of the IP is that changes 192.168.1..:7070 then entrer
With this we enter to receiver and exact to the page oscam where change
In Top of page go to
files
Then
servers to which we add the data and is often as follows
If you want to enable oscam plug in startsat sr 2000 hd.you make this.
1-press f1+345
2-turn off to on in the first window and press ok
3-turn off to on in the 2 window and press ok.
the oscam plug is actived
If you want to disable oscam plug you make the same steps.but turn on to off
and press ok in the two windows.
If you want to enter in the receiver by pc.
1 - disable All cas data clicking f1 ===> 000
2 - Runs oscam plug pressing f1 ===> 345
Window appears, turn off to on then ok
Other window appears turn also off to on then ok
Now been running oscam and must log in to the device to add cccam server
Go to the IE browser on the computer and write ip device followed by port as follows
Is so often the last number of the IP is that changes 192.168.1..:7070 then entrer
With this we enter to receiver and exact to the page oscam where change
In Top of page go to
files
Then
servers to which we add the data and is often as follows
Code:
[reader] label = cccam_1 description = Serveur_Cccam_1 enable = 1 protocol = cccam device = ***xx.dyndns.com,port user = my user password = my pass fallback = 1 group = 1 cccversion = 2.0.11 ccckeepalive = 1
Comment