Samsung Tools-Editors

[lulezim]

DSR CSStudio v.1.2

Quote:
Description: DSR_CSStudio_v 1.2
Bug Fix (DSR CardSharing Studio)
by plugin ACamd

[lulezim]

Re: Samsung Update

SetEditS9500 v1.12............................................. .......................................

[MIDO2010]

Re: Samsung Update

Canaldigitaal OK Astra 19.2
set Samsung to DSR_SSSP card sharing mode in emu 8.4;
set appropriate COM port and start inside plugin vPlug (activate).
enjoy as long it works. by mau 24.09.10

[lulezim]

Re: Samsung Update

Canal Digitaal ok,with exception of Ned1-2-3

[lulezim]

Re: Samsung Update

DSR CSStudio v.1.2
DSR CS Studio 1.2 and Canal Digitaal OK


info:
Canaldigitaal OK Astra 19.2 is back again
set Samsung to DSR_SSSP card sharing mode in emu 8.4;
set appropriate COM port and start inside plugin vPlug (activate).
enjoy as long it works. by mau 24.11.10



_http://www.multiupload.com/UDTR5ATW8U

[mikelo]

Re: Samsung Update

DSR CSStudio v 1.2

Description: DSR_CSStudio_v 1.2
Bug Fix (DSR CardSharing Studio)
by plugin ACamd

[benjo]

Re: Samsung Tools-Editors

must be used with emu revgold 8.3

[dinoel]

Re: Samsung Tools-Editors

This program allows you to share cards in the protocol Cline and nline.
Use a new firmware .... press Menu / 8282 / modem / Ethernet Dongle [SSSP]
In Windows 7 Launch the program as an administrator.
Connect the satellite and PC cabel RS232.

[spanky_1209]

Re: Samsung Tools-Editors

SemcoEditor

Samsung 9500 flash dump

[spanky_1209]

Re: Samsung Tools-Editors

HyperTerminal 6.3


Software updating via PC

Hyperterminal & Samsung.


Software Updating Via PC


1. Start the computer.
2. Select PROGRAM
3. Select ACCESSORIES
4. Select COMMUNICATIONS
5. Select HYPER TERMINAL

How to in HYPER TERMINAL

1. Click on HYPERTERMINAL.EXE
2. Choose a name (SAMSUNG 9500), and choose an icon, click on OK
3. Select direct to COM1, click on OK


ON PORT SETTING

1. Bits per second : 115200
2. Data Bit : 8
3. Parity : NONE
4. Stop Bit : 1
5. Flow Control : NONE klick on OK

HOWTO CHOOSE BINARY FILE

1. Select TRANSFER
2. Select SEND FILE
3. BROWSE <- select the binary file you wnat to load> (9500mc.bin)
4. Select 1KXmodem as Protocol
OBS! DON´T PUSH THE SEND BUTTON YET, WE WILL DO THAT LATER!

When you have done the above, connect your computer and DSR 9500 with a RS-232 cable.
Then you do like this:
1. Unplug your receiver from the "mains?", you can use the power switch on the back of the receiver. On the receivers frontpanel press the right arrow, and hold it, put the switch on the back of the receiver to on.
2. When you see the following apear (not earlier) release your finger from the right arrow button:

On your TV:set you see (if it is connected, not necessary):
"SAMSUNG LOADER (VER 1.0) ..................................."
On the receivers frontpanel you see "3-01"
On your PC,
it say´s "............. .................................. Loading"

If all of this is correct push the SEND button in HYPER TERMINAL

Then just relax until the loading is finished!

The next time you want to load a software, just click on the icon you just created,
all the selection you just made are saved, just choose file, put the receiver in "datamode"
and press send.

to receive from the receiver to pc
use hyperterminal same way as uploading software

than choose receive instead of send
instead of booting the box and hold right arrow key
u hold the left arrow key

[edin4o]

Re: Samsung Tools-Editors

DSR_Studio_v1.5.1

must be used with emu revgold 8.3 and 8.4

[aberdojde]

Re: Samsung Tools-Editors

Samsung TV Channel Editor v08 154910



SamsChannelEditor-v08.rar File size: 202.62 KB

http://www.fileserve.com/file/qJNrskP/SamsChannelEditor-v08.rar