Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Error E-AC and other Humax Error codes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • frezz
    Experienced Board Member
    • Mar 2010
    • 589

    Error E-AC and other Humax Error codes

    Here's a compilation of such codes that I have relating to the recent Humax models. Board members may fins this useful (they are not documented in the user guide)
    ------------------------------------------------------------

    E-HC/bC -- Incorrect header block(CRC-16)
    The software is damaged. Re-download the software.

    E-dC -- Incorrect data block(CRC-16)
    The software is damaged. Re-download the software.

    E-Hn/bF -- Invalid HDF version
    This error can occur when you attempt to download Non-Superset STB software to Superset or Vice-Versa. Please check the STB model and the software.

    E-Id -- Invalid system ID
    This error can occur when you attempt to download F1 software to F1-CI. Please check the STB model and the software.

    E-AC -- Incorrect application CRC-32
    Download latest version of application software.

    E-ut -- UART RX/TX time out
    There is communication problem between source and target
    1) Check whether the S/W is compressed or not and check whether you used the proper download tool for the software
    2) Reduce the download speed and try to download again
    3) Switch STB main power off/on and try to download again
    4) Reboot the PC and try to download again

    E-Ad -- Invalid address
    Humax created the hdf file with an invalid address. Please notify Humax of this error and wait until Humax releases fixed software.

    E-Ao -- Invalid offset address for upload(Odd offset)
    There was a mistake when Humax made hdf file from binary file. Please let Humax know immediately and wait for a fix

    E-Ft -- Flash program time out
    The flash memory in the STB seems damaged. Please try to download again. If you fail agian, send the receiver back to Humax to have the flash memory device replaced

    E-It/Et -- EEPROM program time out
    The EEPROM in the STB seems damaged. Please try to download again. If it fails again, replace the EEPROM device

    E-FE -- Fail compare after flash write
    Flash memory is damaged. Return the main board( CPU Board)

    E-HF -- Invalid HDF Format
    Humax made the hdf file with wrong version. Please notify Humax of this error and wait until a fix is released

    E-Fn -- Invalid flash device
    Flash memory is defect. Need to change the flash memory so please return the Main Board

    E-AS -- Incorrect application size
    Check the software version and STB hardware specification


    Red banner error Message

    These codes may appear on your screen in a blue/red message banner. It displays the so called CAID used by the specific channel and can mean that you don't have legal rights to view this channel.
Working...
X