Tweet
PlugIn: CrossEPG WORKING ON STONE 1.0.0
03/10/2010 6:00 AM
Many thanks go to Mr. Sandro Cavazzoni for the support they have provided so that this plug-in, very important and necessary, have resumed work on our device sh4 Qbox Hd.
Following my request in its repository can be found at:
code.******.com/p/crossepg/
Which reached less than 24 hours ago, although not possessing the physical Qbox Hd, via a telnet session and a few hours of work and testing has led to a release (not without some minor bugs to be refined), which turns out to be, at least from the first test, fully compatible with that currently use the Stone Distribution.
I have personally tested from various points of view and I assure you that this release is working.
Improvements:
1) New Guinea intuitive graphical
2) Automatic recognition of the medium in which to save the EPG data
3) support XMLTV
4) Support OpentTV
5) Enable the user's choice of provider to be enabled to download
6) Full compatibility with STONE DISTRIBUTION 1.0.0
7) Compatibility with skin LT6HD, Infinity Modded By Ambrose
8) Compatibility with emu cam Active
9) Other
Bugs found but currently being resolved:
1) Following a complete restart of the receiver or the gui only, we do not receive the EPG beside the name of the channel.
2) Download the tune slower than the previous 0.3.2, which we were accustomed to using on QBoxHD
I did not understand if you need to patch E2 but those who want more information on this may apply directly to the reference site
code.******.com/p/crossepg/
I believe we have made a big step forward for the compatibility of CrossEPG on our device.
INSTALLATION:
(Manual expecting a update.sh ad hoc)
1) Using an FTP session with your decoder copied to the tmp folder the following file:
enigma2-plugin-systemplugins-crossepg_0.5.9999-svn-108_sh4.tar.gz
2) Open Putty or a telnet session with your cable box and once logged in, type these commands
cd / tmp [Enter]
tar zxf enigma2-plugin-systemplugins-crossepg_0.5.9999-svn-108_sh4.tar.gz-C / [ENTER]
Wait a few seconds to install
and then type
Reboot [ENTER]
You have now installed the CrossEPG.
Now you can configure the remote control to your liking:
1) menu
2) Setup menu
3) plugin
4) CrossEPG (panel configuration CrossEPG)
5) configure
6) storage device (I prefer to keep data on internalflash)
7) Allow import Csv NO
8) EPG Force on IT Boot
9) Download tune on NO
10) Scheduled Download DISABLED
11) To show how plugins
12) To show how extension is
Back
Providers menu, select Open TV OpenTV and Sky Italy enabled with the green button
You can choose to download it directly from here with the yellow button, or go back
Move on download now and wait for the download of EPG complete.
You can also download 's of your interest directly from the EPG menu plugin
selecting CrossEPG **********
or blue button on your remote and select CrossEPG **********.
03/10/2010 6:00 AM
Many thanks go to Mr. Sandro Cavazzoni for the support they have provided so that this plug-in, very important and necessary, have resumed work on our device sh4 Qbox Hd.
Following my request in its repository can be found at:
code.******.com/p/crossepg/
Which reached less than 24 hours ago, although not possessing the physical Qbox Hd, via a telnet session and a few hours of work and testing has led to a release (not without some minor bugs to be refined), which turns out to be, at least from the first test, fully compatible with that currently use the Stone Distribution.
I have personally tested from various points of view and I assure you that this release is working.
Improvements:
1) New Guinea intuitive graphical
2) Automatic recognition of the medium in which to save the EPG data
3) support XMLTV
4) Support OpentTV
5) Enable the user's choice of provider to be enabled to download
6) Full compatibility with STONE DISTRIBUTION 1.0.0
7) Compatibility with skin LT6HD, Infinity Modded By Ambrose
8) Compatibility with emu cam Active
9) Other
Bugs found but currently being resolved:
1) Following a complete restart of the receiver or the gui only, we do not receive the EPG beside the name of the channel.
2) Download the tune slower than the previous 0.3.2, which we were accustomed to using on QBoxHD
I did not understand if you need to patch E2 but those who want more information on this may apply directly to the reference site
code.******.com/p/crossepg/
I believe we have made a big step forward for the compatibility of CrossEPG on our device.
INSTALLATION:
(Manual expecting a update.sh ad hoc)
1) Using an FTP session with your decoder copied to the tmp folder the following file:
enigma2-plugin-systemplugins-crossepg_0.5.9999-svn-108_sh4.tar.gz
2) Open Putty or a telnet session with your cable box and once logged in, type these commands
cd / tmp [Enter]
tar zxf enigma2-plugin-systemplugins-crossepg_0.5.9999-svn-108_sh4.tar.gz-C / [ENTER]
Wait a few seconds to install
and then type
Reboot [ENTER]
You have now installed the CrossEPG.
Now you can configure the remote control to your liking:
1) menu
2) Setup menu
3) plugin
4) CrossEPG (panel configuration CrossEPG)
5) configure
6) storage device (I prefer to keep data on internalflash)
7) Allow import Csv NO
8) EPG Force on IT Boot
9) Download tune on NO
10) Scheduled Download DISABLED
11) To show how plugins
12) To show how extension is
Back
Providers menu, select Open TV OpenTV and Sky Italy enabled with the green button
You can choose to download it directly from here with the yellow button, or go back
Move on download now and wait for the download of EPG complete.
You can also download 's of your interest directly from the EPG menu plugin
selecting CrossEPG **********
or blue button on your remote and select CrossEPG **********.