Alert: Don't Use Hotmail Email Accounts for registration
Collapse
Before Access to all Forums and Trial accounts you must need to activate your account Email address
Sonicview
Collapse
X
-
Re: Sonicview
NewLink Setup Guide
Items Needed:
NewLink (NOT IHUB)
Sonicview8000, or Sonicview360 Elite, or Sonicview360 Premier, or Sonicview4000
USB Drive (Thumb Drive)
Category 5 Cable
Internet connection
Step 1: Download Zipped NewLink (use the correct file for your receiver) file to your desktop.
Step 2: Unzip the file putting the NewLink file on your desktop.
Step 3: Load NewLink file to your receiver. (S/W Upload)
Step 4: After the NewLink file is loaded to the receiver and reboots on its own, shut off the Sonicview receiver from the back.
Step 5: Connect Cat 5 cable to NewLink
Step 6: Connect NewLink to the Receiver at the serial port.
Step 7: Turn on the Sonicview receiver from the back..
You are Done!
Enjoy! -
Re: Sonicview
Sonicview Firmware SV360Premier TE v257 (Telefonica)Attached FilesComment
-
Re: Sonicview
NewLink Setup Guide
Items Needed:
NewLink (NOT IHUB)
Sonicview8000, or Sonicview360 Elite, or Sonicview360 Premier, or Sonicview4000
USB Drive (Thumb Drive)
Category 5 Cable
Internet connection
Step 1: Download Zipped NewLink (use the correct file for your receiver) file to your desktop.
Step 2: Unzip the file putting the NewLink file on your desktop.
Step 3: Load NewLink file to your receiver. (S/W Upload)
Step 4: After the NewLink file is loaded to the receiver and reboots on its own, shut off the Sonicview receiver from the back.
Step 5: Connect Cat 5 cable to NewLink
Step 6: Connect NewLink to the Receiver at the serial port.
Step 7: Turn on the Sonicview receiver from the back..
You are Done!
Enjoy!
thanks.cannon_29
DM 500sComment
Comment