Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

EMU Firmware C-Tech HD

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mikine56
    Banned
    • Mar 2010
    • 3258

    EMU Firmware C-Tech HD

    Firmware Clarke Tech 5000 HD Combo Plus

    F16 New Firmware 231p for Clarke Tech 5000 HD Combo Plus

    - Fixed critical bug - Malfunctioning LOOP function. In shutdown mode the thermometer bug leads to excessive heating in the mode stendbay. Especially if the previous channel was switched off with the transponder with vertical polarization.

    Not has the Italian language in the menu

    NOTE:
    FW is not the usual team, so do not say "official"
    Not being official, is at your own risk installing this firmware!


    1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

    2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

    It 's always better before you do this and save the settings and softcam and reset the decoder!

    Regards

    VeRDe

    F16_231p.rar
  • mikine56
    Banned
    • Mar 2010
    • 3258

    #2
    Re: EMU Firmware C-Tech HD

    Update 06/07/2010

    >softcam clarke-tech<

    >rcs digi tv new key01<(0.8-1.0°W)only channels N*gra 2
    >tv globo ok<(13°E)
    >mediatech ok<(4°W)only channels seca
    >rai seca ok<(13°E)
    Attached Files

    Comment

    • mikine56
      Banned
      • Mar 2010
      • 3258

      #3
      Re: EMU Firmware C-Tech HD

      09-07-10


      Code:
      >TV Globo new Key 00 
      >RCS DigiTv key 00 ok
      >rai seca  key ok
      >mediatech key ok
      Attached Files

      Comment

      • mikine56
        Banned
        • Mar 2010
        • 3258

        #4
        Re: EMU Firmware C-Tech HD

        Firmware Clarke Tech 5000 HD Combo Plus

        EMU Firmware F16 for C-Tech HD 5000C plus
        Firmware Clarke Tech 5000 HD Combo Plus

        F16 New Firmware 232p for Clarke Tech 5000 HD Combo Plus

        - Being tested to operate the exchange in a series of maps 52y reader receiver, as well as in multikas DRE CAM mode is added for decoding lightweight 5 channel Tricolor (First, Russia, NTV, Sports, News), in fact it is not used when you view them. The regime officially turned provider for non-recommended equipment for the action the draw and will not last forever ....
        - Fix multikas VIA CAM to work with Kinoreysami 1,2,3 c maps NTV + in reader
        - Auto resolution - it is now possible to disable apskeyler receiver, if apskeyler telecom cooler!!
        - Small pleasant Revised

        Not has the Italian language in the menu!

        Code:

        NOTE: FW is not the usual team, so do not say "official" Not being official, is at your own risk installing this firmware!



        1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

        2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

        It 's always better before you do this and save the settings and softcam and reset the decoder!
        F16_232p.rar

        Comment

        • aidasj
          Member
          • Feb 2010
          • 56

          #5
          Re: EMU Firmware C-Tech HD

          Firmware Clarke Tech 5000 HD Combo Plus

          F16 New Firmware 235p for Clarke Tech 5000 HD Combo Plus

          -Added a command to activate the card tricolor. It is necessary for the convenience of early use of the card. Map does not require a native wood-kam to activate and run in the Doctors reader. The emergence of markets an extensive party official maps of the Tricolor receivers GS8300, but separately and at a reasonable price (in Minsk, for example, 135ue. 600руб of them in the account to activate an annual subscription optimum) necessitated the addition of software Doctors able to activate these cards directly to the reader receiver. A nice addition compared with the use of these cards in inexpensive Chinese clones oupenov 820 is the ability to watch and package SUPER OPTIMUM from transponder 11,804 in DVB-S2 MPEG4 SD test mode. What many have noticed that the Doctor, as HD receivers, even if only slightly, but still gives Kartika on the LCD panel better than any SDshnikov plus hdmi digital output. An important advantage of such a kit is much more secure access to content providers than using connections to external cards, but in some cases only one possible. Of course full support for the exchange of cards Series 52 and others - also works.

          Not has the Italian language in the menu!

          NOTE:
          FW is not the usual team, so do not say "official"
          Not being official, is at your own risk installing
          this firmware!


          1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

          2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

          It 's always better before you do this and save the settings and softcam and reset the decoder!

          Download http://www.2shared.com/file/8RXPKNl5/F16_235p.html

          Comment

          • aidasj
            Member
            • Feb 2010
            • 56

            #6
            Re: EMU Firmware C-Tech HD

            Firmware Clarke Tech 5000 HD Combo Plus

            F16 New Firmware 237p for Clarke Tech 5000 HD Combo Plus

            Not has the Italian language in the menu!

            NOTE: FW is not the usual team, so do not say "official"
            Not being official, is at your own risk installing this firmware!




            1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

            2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

            It 's always better before you do this and save the settings and softcam and reset the decoder!

            Download: http://www22.zippyshare.com/v/93112330/file.html

            Comment

            Working...