Coolstream Update

[mikine56]

Coolstream HD settings

HotBird + Astra by Fatman

[mikine56]

Re: Coolstream Update

busybox 1.2.0 for Coolstream

busybox 1.2.0 with awk, nc, pivot_root, readlink and uname for original FW.Don't forget chmod to 755 and make links (ln -s busybox awk...).

[mikine56]

Re: Coolstream Update

Lastest Oscam for Coolstream HD1

Changeset [2680] by landlord
Update documentation: example of 'auprovid' and 'CAID' in 'oscam.server'.

[mikine56]

Re: Coolstream Update

Coolstream HD-1 Original Firmware 11.07.2010 v 1.82

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.

----------------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
11.07.2010

- Update to new kernel wich will fix Time
in standby mode
- Add new directfb driver
Fix Games and enable Sound while play
- Fade Menus (can be enabled in OSD Settings)
- Add Save/Restore Settings, you can have multiple
Setting by date. Check "Manage settings" for it.
- Fix Epg Plus
- Fix Frontpanel driver for some missing letters

http://hotfile.com/dl/54232418/4492377/cs182.img.html

[mikine56]

Re: Coolstream Update

Flash update tool
UpdateTool 1.4

Version 1.4 changes

- Alternative icons are in / var / share / icons searched / and copy to / usr / share / tuxbox / neutrino / icons offered /.
- Faster handling of the display window

[mikine56]

Re: Coolstream Update

Original Coolstream Image v1.84

Software Update Wizard - Agreement

Do not perform updates using any data other than the official update data from our website.
Using Software Updates You expressly acknowledge and agree that use of this Software is at
your own risk.
In no event shall Coolstream LTD be liable for any damages whatsever.
Contact info@coolstreamtech.com for any questions about our Software.
----------------------------------------------------------------------------------

Warning:

This release will upgrade your Kernel on first boot if not already done!!!
Please dont power off your receiver bevore Upgrade is done!
-----------------------------------------------------------------------------------
15.07.2010

- Fix TS clock conversion

http://hotfile.com/dl/54994480/d8e9fa7/cs184.img.html

[mikine56]

Re: Coolstream Update

Coolstream Neo Emergency Tool
16-07-2010

To Upgrade your Coolstream receiver please copy mtd1.img (kernel) and mtd2.img (filesystem) on USB STICK (must be FAT32 Formated).
Insert USB STICK in Coolstream USB Port, connect serial Cable between PC and Coolstream STB, and start the program on your Windows PC following the Instructions to update Kernel and/or Filesystem.

Note: If the Update doesnt succeed just change to another USB STICK, maybe this one you have is not supported by our bootloader! Or
just push serial/usb debug button and check output.

[mikine56]

Re: Coolstream Update

Oscam for coolstream

2764: loadbalance: better selection of readers

[mikine56]

Re: Coolstream Update

Coolstream HD-1 Tools/Dreamset
latest Dreamset version...also ready for neutrino HD

Dreamset Version 2.30Added:
- At 'Organize Settings' page, you can switch 'User Services' and 'Bouquet Services' lists to detail view (Right click on list and select 'List View' option). Detail view shows the same columns like 'All Services' list.
- At 'Edit settings' page added: tooltips on transpoders and services, 'Find' fumctionality.
- 'Statistics' Page, a new column added with the number of services has been placed in user lists.

Fixed:
- Fixed, translations (menus, dialogs etc)

Dreamset Version 230.zip, 4,813 KB

[mikine56]

Re: Coolstream Update

~reloaded~ BETA for CoolStrem NEO
I think this will be your joy prepare Image please test first without your changes and reported.
I like :gudu well and problems, I could not find the fast :thumbsup: it should be on the earlier CoolStream models running, but my oh so beloved HD1 has now Bazi ....
The SVN Version is 675 OScam is Version 2743

20100717-1343-mtd2(2).rar, 17,507 KB

[mikine56]

Re: Coolstream Update

Coolstream Emergency Tool for Neo
17-07-2010

NEVER USE NOT OFICIAL SOFTWARE, OR YOU DO IT ON YOUR OWN RISK

To Upgrade your Coolstream receiver please copy kernel.img (kernel) and sysroot.img.img (filesystem) on USB STICK (must be FAT32 Formated).
Insert USB STICK in Coolstream USB Port(front), connect serial Cable between PC and Coolstream STB, and start the program on your Windows PC following the Instructions to update Kernel and/or Filesystem. After the tool recognise your Coolstream please wait few seconds bevore push the button for kernel or filesys update.

Note: If the Update doesnt succeed just change to another USB STICK, maybe this one you have is not supported by our bootloader! Or if you use some usb to serial Cable the communication in windows may disturbed, so remove and insert it again.

Manual Update
-------------

You can flash over serial direct from bootloader, set your serial port to 115 200 baud and press enter after power up, you will get a prompt from the bootloader (dont forget to insert the usb stick with needed files):
Hdx>
there you have to use this command according to what you need to flash.

Kernel update:
-------------

HDx>usb start
HDx>fatload usb 0 0x0E000000 kernel.img


reading kernel.img
.................................................. .................................................. .................................................. .................................................. .

2060560 bytes read
HDx>erase 0xF0080000 +0x00400000


................................
Erased 32 sectors
HDx>cp.b 0x0E000000 0xF0080000 0x00400000

Copy to Flash... ................................
done
HDx>re
to reset STB

Filesystem Update:
------------------

HDx> usb start
(Re)start USB...
USB: ehci_hcd_init();
CX2450x init hccr e8000100 and hcor e8000140 hc_length 64
Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 2 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
HDx> fatload usb 0 0x0E000000 sysroot.img
reading sysroot.img
.
.................................................. ..............................
.................................................. ............

19239496 bytes read <-----here we must calculate and convert to HEX value, for example 23601412 / 4 = 5A0841
HDx> erase 0xF0480000 0xF1FFFFFF
.................................................. ..............................
.................................................. ..............................
Erased 220 sectors
HDx> cp 0x0E000000 0xF0480000 0x5A0841
Copy to Flash... .................................................. .............
.................................................. ....
done
HDx> re

Download

[mikine56]

Re: Coolstream Update

~reloaded~ BETA II vom 17.07.2010 SVN 679 für die CoolStrem NEO

So perhaps without new Version defects and Bazi's driver, although I have no difference is ....
The SVN Version is 679 OScam is Version 2769

20100717-2329-mtd2.rar, 17,544 KB

[mikine56]

Re: Coolstream Update

Oscam for coolstream

Changeset [2774]

Changed: 2 lines

1)add stapi target to Makefile

2)loadbalance: rc=4 now never called again, when ecm_count=0, so new
statistics have to start with ecm_count=0

[aaba]

Re: Coolstream Update

r2776 | schlocke | 2010-07-18 12:13:16 -0700 (Sun, 18 Jul 2010) | 3 lines

loadbalance: fixed saving provid (6 numbers instead of 4)
oscam.c when request_cw fails, reader is killed&restarted

[mikine56]

Re: Coolstream Update

Oscam for coolstream
2782: loadbalancer: cache1 check on chk_pending for faster response