Showbox HD 5000 Vitamin-Media HD box with an Ethernet interface
The Korean company WINIX, known as a producer receivers Openbox, Showbox and Koscom, entered the market with a new receiver Showbox HD 5000 Vitamin.
After a simple and very popular Openbox, were complex and classic design Showbox SD, now a manufacturer returned to simplicity. The main assets of the brand remains in this case the hardware quality.
Remote control (same as model SD, otlichayuschietsya only the location of some buttons). The device can connect to your TV via SCART, and LCD or plasma via HDMI. After switching to the network under a basic program settings: on the front panel lights up blue LEDs (can be disabled via the menu or decrease the brightness) information on measures taken and additional channels of information displayed on the VFD display.
The receiver is equipped with reader or Conax. Apreygd can be done via USB or RS232. When you update via USB-just copy the file on a USB flash, and connect to the device, vyberat item "Update via USB". The process itself is less than a minute, and then reboot. After rebooting should make reset to factory settings. Available software version 098 of 24/02/2010. To update via the serial port RS232, need the STBupdater, which only works with COM1,-because of what may be a problem for the owners of certain types of USB-RS232 converters.
The unit supports connection DiSEqC 1.0,1.1, USALS, UNICABLE, search lasts about 10 minutes. The device can store up to 6000 TV and radio channels.
The receiver allows you to create up to 7 of favorite groups, sorted according to alphabet, coding systems and satellites.
Data on the access card are displayed properly. Tested receiver with two cards: Cryptoworks CS Link Skylink in card reader and access to the module IRDETO Cryptoworks,-the slightest problem. In the device can simultaneously install two access module CAM. Supported resolutions: 576i, 576p, 720p, 1080i, 1080p 25 Hz, 1080p 50 Hz. Under the removable front panel control buttons and the "Quick Access" - Sleep On / Off, Channel Up / Down, Menu, OK, Volume + / -; receiver can operate without a remote control.
EPG display is not quite correct, but it is only a software issue that will undoubtedly be eliminated at the other firmware. The device can display simple or advanced EPG for 7 days after clicking on DO. You can use the transition to the selected channel to a selected point EPG. TXT displayed correctly.
For information about the current program can be obtained by pressing "I" - channel number and name, time, type of software (for free, encrypted), blocking the channel, teletext, subtitles, AC3 sound, short and extended EPG and the remainder of the broadcast program.
Multimedia device:
The device is not designed to mount the internal drive - you can only connect an external drive is USB.
Playback and recording formats: MKV, XVID, DIVX, AVI; MP3 and JPEG files were tested on a USB Flash - Kingston Traveler 8GB.
Viewing records in the PC:
Device has a network connector RJ45, for connecting to the network is only supported for homesharing, the device supports the protocol CCcam, data on these servers are recruited Cccam_ServerInfo.txt via USB. Other functions of the network is not yet available. In the next firmware will be able to update the software through the network.
Main technical data devices:
-MPEG-4 is fully compatible with DVB-S/S2
-Max 6000 channels
-Channel Type: TV, Radio, Favorite, Satellite, coding
-EPG data for 7 days
-Language OSD: English, German, French, Spanish, Portuguese, Italian, Danish, Czech
-Access control: 2 slots for modules, 1 slot for Conax
-Playback functions (DivX, XviD, AVI, MKV, etc.)
Interface
-Satellite TV
-Connector Type 2 x F-Type, 75 Ohm
Demodulation-QPSK/8PSK (DVB-S/S2)
DiSEqC-compatible versions 1.0, 1.2, USALS
Processing of images and sound
-Video: MPEG-2 MP @ ML, MPEG4 HD HP @ L3, PAL
-Audio: MPEG-1 versions I, II, III, Dolby-AC3 Audio
Front:
-Display VFD, 2 x LED
-7 Buttons (Sleep, Menu and OK, VOL-, VOL +, CH-, CH +)
Slot 1-X Access Card
-2 Slots X AMU
Version USB 1.1/2.0 (5 V DC 1 max.)
Rear panel:
-2 X SCART
-2 X RCA (1 x Video, 2 x Audio, 1 x component)
-S / PDIF 1 x optical
-HDMI 1.3a (with support for the regime 1080p)
-RS-232C x 1 (9-pin)
Version USB 1.1/2.0 (5 V DC 1 max.)
-LAN RJ45 (MAC-address)
-Cord
-Sat: input-output
-Power Switch Off / On
Consumption:
-AC 90-250 V 50/60 Hz
-Power Consumption Max 45W
Consumption-off 0 W
-The consumption of 0,7 W in standby mode
Completeness:
Instruction in three languages
-Remote control, 2 batteries
Price on the Czech market is now around 5000, - CZK, which is certainly interesting for many.
The Korean company WINIX, known as a producer receivers Openbox, Showbox and Koscom, entered the market with a new receiver Showbox HD 5000 Vitamin.
After a simple and very popular Openbox, were complex and classic design Showbox SD, now a manufacturer returned to simplicity. The main assets of the brand remains in this case the hardware quality.
Remote control (same as model SD, otlichayuschietsya only the location of some buttons). The device can connect to your TV via SCART, and LCD or plasma via HDMI. After switching to the network under a basic program settings: on the front panel lights up blue LEDs (can be disabled via the menu or decrease the brightness) information on measures taken and additional channels of information displayed on the VFD display.
The receiver is equipped with reader or Conax. Apreygd can be done via USB or RS232. When you update via USB-just copy the file on a USB flash, and connect to the device, vyberat item "Update via USB". The process itself is less than a minute, and then reboot. After rebooting should make reset to factory settings. Available software version 098 of 24/02/2010. To update via the serial port RS232, need the STBupdater, which only works with COM1,-because of what may be a problem for the owners of certain types of USB-RS232 converters.
The unit supports connection DiSEqC 1.0,1.1, USALS, UNICABLE, search lasts about 10 minutes. The device can store up to 6000 TV and radio channels.
The receiver allows you to create up to 7 of favorite groups, sorted according to alphabet, coding systems and satellites.
Data on the access card are displayed properly. Tested receiver with two cards: Cryptoworks CS Link Skylink in card reader and access to the module IRDETO Cryptoworks,-the slightest problem. In the device can simultaneously install two access module CAM. Supported resolutions: 576i, 576p, 720p, 1080i, 1080p 25 Hz, 1080p 50 Hz. Under the removable front panel control buttons and the "Quick Access" - Sleep On / Off, Channel Up / Down, Menu, OK, Volume + / -; receiver can operate without a remote control.
EPG display is not quite correct, but it is only a software issue that will undoubtedly be eliminated at the other firmware. The device can display simple or advanced EPG for 7 days after clicking on DO. You can use the transition to the selected channel to a selected point EPG. TXT displayed correctly.
For information about the current program can be obtained by pressing "I" - channel number and name, time, type of software (for free, encrypted), blocking the channel, teletext, subtitles, AC3 sound, short and extended EPG and the remainder of the broadcast program.
Multimedia device:
The device is not designed to mount the internal drive - you can only connect an external drive is USB.
Playback and recording formats: MKV, XVID, DIVX, AVI; MP3 and JPEG files were tested on a USB Flash - Kingston Traveler 8GB.
Viewing records in the PC:
Device has a network connector RJ45, for connecting to the network is only supported for homesharing, the device supports the protocol CCcam, data on these servers are recruited Cccam_ServerInfo.txt via USB. Other functions of the network is not yet available. In the next firmware will be able to update the software through the network.
Main technical data devices:
-MPEG-4 is fully compatible with DVB-S/S2
-Max 6000 channels
-Channel Type: TV, Radio, Favorite, Satellite, coding
-EPG data for 7 days
-Language OSD: English, German, French, Spanish, Portuguese, Italian, Danish, Czech
-Access control: 2 slots for modules, 1 slot for Conax
-Playback functions (DivX, XviD, AVI, MKV, etc.)
Interface
-Satellite TV
-Connector Type 2 x F-Type, 75 Ohm
Demodulation-QPSK/8PSK (DVB-S/S2)
DiSEqC-compatible versions 1.0, 1.2, USALS
Processing of images and sound
-Video: MPEG-2 MP @ ML, MPEG4 HD HP @ L3, PAL
-Audio: MPEG-1 versions I, II, III, Dolby-AC3 Audio
Front:
-Display VFD, 2 x LED
-7 Buttons (Sleep, Menu and OK, VOL-, VOL +, CH-, CH +)
Slot 1-X Access Card
-2 Slots X AMU
Version USB 1.1/2.0 (5 V DC 1 max.)
Rear panel:
-2 X SCART
-2 X RCA (1 x Video, 2 x Audio, 1 x component)
-S / PDIF 1 x optical
-HDMI 1.3a (with support for the regime 1080p)
-RS-232C x 1 (9-pin)
Version USB 1.1/2.0 (5 V DC 1 max.)
-LAN RJ45 (MAC-address)
-Cord
-Sat: input-output
-Power Switch Off / On
Consumption:
-AC 90-250 V 50/60 Hz
-Power Consumption Max 45W
Consumption-off 0 W
-The consumption of 0,7 W in standby mode
Completeness:
Instruction in three languages
-Remote control, 2 batteries
Price on the Czech market is now around 5000, - CZK, which is certainly interesting for many.
Comment