Tweet
any body help me when i upload new software in openbox s9 clin option not show now how i enter cline in openbox
-
-
Re: how cline enter in openbox s9
Menu -> Network Local Settings
select CCcam Plug Setting
click the OK button.Is my post useful for you? Please press sigpic -
Re: how cline enter in openbox s9
If you don't want to enter it manually, you need to have a cc*m.cfg file, which contains your cl*ne. Then add this file to a usb stick then place the stick to the usb connector at rear of the receiver. Now go to menu/network local settings and select cc*am plug setting and click ok button. Then select 'update files by usb' and push ok button. Now, choose cc*m.cfg and press ok button, you should see a tick appear, which indicates that you selected the file. Once, the tick is shown, push the yellow button. Then choose 'cc*m plug setting' and click ok. Then select option one and push ok button. Then you can highlight each cl*ne you wish to activate.
If my post was useful to you, please push 'thanks' button.Comment
-
Re: how cline enter in openbox s9
1) Press the Menu button
2) Scroll down to Network Local Setting
3) Scroll across to CCcam plug setting
4) Click Manage Config Files
In manage Config files:
1) Select CCcam.cfg
2) Click on Add (Blue Button)
This is how to enter your information in the correct order:
Leave the protocol as CCcam
Host = IP Address or dyndns address
Port = Port Number
User = Username
Password = Password
So for exampe if your information looked like this:
C: 192.168.1.6 12000 example password
Then in Host you would enter: 192.168.1.6
In Port you would enter: 12000
For User you would enter: example
For Password you would enter: password
Once all the above steps are complete press the yellow button
You should now see the cline: C: 192.168.1.6 example 12000 Offline
Press the Green button and it will add a tick next to Offline
Exit the menu and it will tell you it's saving
Give the receiver a complete restart and providing you are connected on your local network/internet the receiver should connect to the server using the details you just entered.
If you are going to use a USB stick to send over the the Cccam.cfg file rather than entering it manually as detailed above then the best way is to make a notepad file and enter on the top line:
C: 192.168.1.6 12000 example password
Save the file as CCcam.cfg file and load it in using the options in the menu. Once loaded on again make sure the info is marked as active then give the receiver a restart. Again providing your network settings are good the receiver should now connect to the server using the details you've entered.Comment
-
Re: how cline enter in openbox s9
You can also enter using the lan tool IMO this is the best method because using
remote is time consuming and easy to make mistake by usb a pain if you have a
usb hard drive as well (plugging/unplugging).
On a side note remember if you are creating CCcam.cfg in note pad to follow this
procedure:
1.open note pad
2.copy and paste cline in to it
3.select save as
4.in the save type as option select all files option (not the default .txt)
5.type name exactly as CCcam.cfg
6.press save
If you don't follow this procedure you will end up with a .txt file instead of a .cfg.Liked my post then push the sigpic button.
Comment
-
Re: how cline enter in openbox s9
For those of you who for one reason or another, are experiancing difficulties adding clines, I have put together this basic tutorial showing how to add clines.
make new txt file and rename it cccam.cfg
put your active Cline in cccam.cfg and save it
Now add the cccam.cfg file to a USB Stick, do not zip the file, add it as is.
Then place the USB Stick that contains the cccam.cfg file, into the USB connector at the rear of the receiver.
Now goto Menu -> Network Local Settings and select CCcam Plug Setting and click the OK button
Now select CCcam,cfg [CCcam Plug] and click the OK button, you should then see a check mark or tick appear, indicating you have selected the file, if there is no tick shown, then you have not selected anything, and nothing will be installed.
Once the tick is displayed, click the Yellow button.
Now select CCcam Plug Setting and click the OK button.
Now select option 1 .. CCcam.cfg and click the OK button.
Now highlight each cline you wish to activate, by clicking the OK button, a tick will appear next to each cline you have activated.
Now reboot your receiver, and if all is okay, you may start viewing channels
CCcamComment
-
Re: how cline enter in openbox s9
You may use the software STBHD_LAN_MM on the PC. Enter the IP address and password of the decoder and go to put the cline in CCcam.cfg fileComment
-
Re: how cline enter in openbox s9
but cline option does not show in present software
any body give me software with cline optionComment
-
Liked my post then push the sigpic button.Comment
-
brothers smal clines enter and save in openbox s9
but when i enter satlover cline and try to save
cline not save due to satlover cline long length
satlover cline is not working two days ago
anybody tell me why its not working....
I am change daily cline in startrack 2015 hd plus
but previous 2 days cline not workComment
-
Re: how cline enter in openbox s9
Do you enter them manually? Did you try with a CCcam.cfg file (as posted here above) - really should work.
When entering manually: make sure you spell all correct (capitals, also mind the underscore '_' in satlover clines.Comment
-
Re: how cline enter in openbox s9
try this
--http://www.satlover.eu/forum/cccam/36218-cccam-in-openbox-s10-hd.html
--http://www.satlover.com/forum/cccam/32453-cccam-and-openbox-s10-problems.html
... too long ...
try this
- replace
cccam.myveryveryverylongservername.org
with
123.123.123.123Comment
-
Re: how cline enter in openbox s9
Try to use the dbox program to edit clines of your openbox, it is the easiest way to upgrade.
RegardsComment
Comment