Alert: Don't Use Hotmail Email Accounts for registration

**gcms** · 08-23-2012, 09:37 AM

Re: All OTHERS DIGITAL RECEIVERS==-MASTER CODE nadeem rafi

Can some tell me the master code tiger t600 2 usb hd

**nadeemrafi1963** · 08-23-2012, 09:38 AM

Re: All OTHERS DIGITAL RECEIVERS==-MASTER CODE nadeem rafi

TECNOSAT T-888 FTA

1. Press ?EXIT? button & ?6108? through RCU
(Remote Control Unit), activate patch.
2. Then go to Menu Parental Lock Input Password ?0000?.
3. Pay Channel Lock Status has to be ?OFF"
for the Scrambled Channels to work.
Method to change the key codes:
To view the Code Menu, go to Menu Information Code Edi
t. To update codes press ?EXIT &
8088? through RCU (Remote Control Unit).
Multi-picture Option:
Press ?Blue? button, Multi PIG with 9 pictures made available.

===============================================
Patch activation -Technosat Bodyguard 555

Procedure To Activate & De-activate Patch Soft-Ware
Steps to activate the patch:
Go to Menu Press Red, Green, Yellow and Blue color button.
Lock Menu appears with Lock Status -
Pay Channel Lock Status -
1. Always off
2. On
3. Off
? Select Always off option for the emulation to be active even after the power chord is
removed
? Select Off option for the emulation to be active, but this becomes inactive once the power
chord is removed
? Select On option for the emulation to be inactive
How to get Multi Picture Option?
Please select sort button through remote to get this option
Three options appear:
4 Channels
9 Channels
16 Channels
Select appropriately
.===============================================
Technosat T-1100 Plus FTA Receiver

Procedure To Activate Patch Soft-Ware On T-1100 Plus FTA Receiver
Pre-Requist:
1. The Soft-Ware version should be greater or equal to 5.0.
2. The last 4 digit of manufacturing serial no. of the receiver should be above 6000.
Note: Check the serial no. barcode on the back panel of the receiver.
Steps to activate the patch :
# There are basically two Methods to activate the Soft-Ware patch ?
Method 1 ?
1. Goto Menu User Installation Parental Lock Current password Press
?9911? from the RCU.
2. After pressing ?9911?, you can see a RED color button on the bottom will appear.
Which indicates the patch is enabled and can watch the scrambled channels.
Method 2 ?
1. Goto any one of the scrambled channels of ABsat, Multivision or Polsat.
2. Just Press ?9911? keys from the RCU.
3. The patch is activated.
Note: Once the patch is activated the emulation Soft-Ware will keep working even after
the receiver is switched ?OFF? and turned ?ON? again. The only way to deactivate the
emulation Soft-Ware is to bring receiver to Factory Default
=============================================
Technosat 2000Ultra

Activation of Emulation
Go to Menu and type 5400, emulation is made active with the display of Code Edit
Option in the Menu and vice versa for deactivation. To view the codes , press yellow
button from the remote .
Universal Password : 6789
===============================================
TECHNOSAT\5200FTA

Procedure To Activate Patch Soft-Ware On T-1100 Plus FTA Receiver
Pre-Requist:
1. The Soft-Ware version should be greater or equal to 5.0.
2. The last 4 digit of manufacturing serial no. of the receiver should be above 6000.
Note: Check the serial no. barcode on the back panel of the receiver.
Steps to activate the patch :
# There are basically two Methods to activate the Soft-Ware patch ?
Method 1 ?
1. Goto Menu User Installation Parental Lock Current password Press
?9911? from the RCU.
2. After pressing ?9911?, you can see a RED color button on the bottom will appear.
Which indicates the patch is enabled and can watch the scrambled channels.
Method 2 ?
1. Goto any one of the scrambled channels of ABsat, Multivision or Polsat.
2. Just Press ?9911? keys from the RCU.
3. The patch is activated.
Note: Once the patch is activated the emulation Soft-Ware will keep working even after
the receiver is switched ?OFF? and turned ?ON? again. The only way to deactivate the
emulation Soft-Ware is to bring receiver to Factory Default
===============================================
TECHNOSAT\6000Plus_PVR

Procedure To Activate & De-activate Patch Soft-Ware
Steps to activate the patch:
# There are basically two Methods to activate the Soft-Ware patch ?
Method 1 ?
1. Goto Menu User Installation Parental Lock Current password Press ?9911? from
the RCU.
2. After pressing ?9911?, you can see a RED color button on the bottom will appear. Which
indicates the patch is enabled and can watch the scrambled channels.
Method 2 ?
1. Goto any one of the scrambled channels of ABsat, Multivision or Polsat.
2. Wait till you see on ?0000: Scrambled? message on the right-top corner of the TV screen.
3. Then, Press ?9911? keys from the RCU.
4. The patch is activated.
Note: Once the patch is activated the emulation Soft-Ware will keep working even after the
receiver is switched ?OFF? and turned ?ON? again.
Conditional Access System:
If you need to watch channels using any original Smart Cards (Like Irdeto, Viaccess,
Mediaguard, Nagravision, etc.) on the embedded slot you need to De-activate the emulation
Soft-Ware (patch) to allow the embedded slot to function correctly with the original Smart Card.
Steps to de-activate the patch:
# There are basically two Methods to de-activate the Soft-Ware patch ?
Method 1 ?
3. Goto Menu User Installation Parental Lock Current password Press ?9911? from
the RCU.
4. After pressing ?9911?, you can see a RED color button on the bottom will disappear.
Which indicates the patch is disabled and you cannot watch the scrambled channels.
Method 2 ?
5. Goto any one of the scrambled channels of ABsat, Multivision or Polsat.
6. Then, Press ?9911? keys from the RCU.
7. The patch is de-activated.
Note: Once the patch is de-activated the emulation Soft-Ware will not work even after the
receiver is switched ?OFF? and turned ?ON? again

Tiger T600 HD 2USB V2.66 23-07-2012
manual enter :-
1:Goes to patch menu and select Biss
2:Press Red button or edit any key
3: Press F1 and enter ptv sport key frequency
4: Enter compete key and press OK
1)add lock RCU Function (F1+222)
2)when the RCU Status is Lock.then only F1 KEY and num_2 KEY can be used
Tiger * T600 HD CA 2USB LAN - Digital satellite receiver for receiving satellite television programs, high-definition HDTV, with an installed network card (LAN) to view the free and pay channels with the ability to record via USB. The main difference with the younger model Tiger * T500 HD is a new, more powerful processor company NXP, VFD display with channel name, and the presence of an additional USB connector. Also in komlpekt supply includes an HDMI cable.

The model supports all the major technological advances:
* Signal reception standard DVB-S2;
* Decoding of MPEG-4 video (H.264 AVC) as a standard definition and high definition;
* Availability of HDMI interface with HDCP.
* Built meditsentr loses AVI, MKV * Support WIFI, FTP, SAMBA, ******* * clear and trouble free record HD on Flash Drives

Of the interesting features of this tuner is also worth mentioning: the existence of a universal card reader, a USB connector to be able to write very fast scanning and channel change, channel search by first letters, channel management (sorting, procedures, renaming), PIP (Picture in Picture in within the same transponder), a timer to switch channels, change the Soft-Ware via USB.

Specifications

Specifications Tiger * T600 HD CA 2USB LAN:

* The new chip Philips / NXP 8735E
* Flash Memory: 64 MB
* SDRAM Memory: 128 MB
* Tuner: sharp6306
* Standards Support: SD / HD (MPEG2 / MPEG4 H.264), DVB-S, DVB-S2
* DiSEqC Control - 1,0; 1,1; 1,2 / USALS
* PVR - for setting up and record / playback
* Memory up to 10,000 channels (TV and radio)
* Multi-language menu
* Fast switching between channels
* Convenient opportunity to create their own lists of favorite channels
* Electronic Programme Guide - EPG
* Support for subtitles on the screen
* Teletext supported by VBI and OSD
* The 'Child Protection'
* Feature picture in picture �(PIP)
* Soft-Ware update via USB and RS-232
* Time Shift (for connecting USB-drive)
* Video recording and playback (when connected to USB-drive)
* Ability to view one channel and record another within the same transponder
* Support format USB FAT & FAT32. NTFS (read only)
* Support format files playable: AVI, MKV, MP4, Mov, 3gp, MPG, PS, vob, dat, ts, m2ts, flv, asf

Front panel Tiger * T600 HD CA 2USB LAN:

* VFD Display
* CA - card reader
* USB - to connect an external USB-device
* Control keys menu

Rear panel Tiger * T600 HD CA 2USB LAN:

* HDMI - HD-digital video / audio output
* Digital Audio S / PDIF coaxial
* TV SCART - analog TV connection
* LNB IF input - input satellite dish
* LNB IF Loop - through-out the satellite dish
* RCA Stereo - Analog Audio
* 0/12V 50mA max-connection of an additional switch converters
* USB - to connect an external USB-device
* LAN 10/100 Mbps Ethernet - to connect to the LAN and the Internet
* RS 232 - connection to COM-port
* Power switch

Options:

* Receiver TIGER * T600 HD
* HDMI cable.
* User Guide
* Control panel
* Batteries NADEEM RAFI 03009622864

Welcome!

Alert: Don't Use Hotmail Email Accounts for registration

Re: All OTHERS DIGITAL RECEIVERS==-MASTER CODE nadeem rafi

Re: All OTHERS DIGITAL RECEIVERS==-MASTER CODE nadeem rafi

Comment

Comment