In this tutorial I will show how to configurate your Optibox receiver and your PC for cardsharing.
Hardware need :
1. Optibox FTA PRV Receiver
2. RS232 Cable (null modem)
3. PC with free com port*
4. Internet
5. Usb Flash Drive (for software update)
Software need :
1.SSSP CCcam with FLYCCcam for Microsoft Windows
Download SSSP FLYCCcam
2. Optibox fta pvr software v1.18.75 or later
Download Software for optibox
3.Cline for Card share
*If there are not Com Port on pc, Then use USB to COM cable
Step 1 : Receiver Configuration
1. Download optibox software, and transfer to USB flash memory. Put flash memory into USB port front on optibox receiver , and follow instruction on tv for software update .
2.Connect PC and BOX with RS232 cable
3.On Optibox remote control press button 'menu' then enter 8282 and choose Modem
4.Move left-right until see Ethernet Dongle[SSSP]
5. Confirm settings pressing button Menu again
PC configuration:
1. Download SSSP CCCam client for PC (microsoft windows)
2. Extract arhive and go to folder Plugins
3. Open FLYCCCAM.cfg and enter your Cline in this form :
C: server port username password no { 0:0:3 }
4.Open program SSSP_Cccam1.3.1 and configure like this :
Com Port : COM1 (default)*
Baudrate : 115200
Parity : None
Stop Bits : 2
Data bits : 8
5. Press the Start and watch all channels on your favorite optibox fta prv receiver.
*if your pc have more then one com port , then choose number of com port you pluged in cable
Hardware need :
1. Optibox FTA PRV Receiver
2. RS232 Cable (null modem)
3. PC with free com port*
4. Internet
5. Usb Flash Drive (for software update)
Software need :
1.SSSP CCcam with FLYCCcam for Microsoft Windows
Download SSSP FLYCCcam
2. Optibox fta pvr software v1.18.75 or later
Download Software for optibox
3.Cline for Card share
*If there are not Com Port on pc, Then use USB to COM cable
Step 1 : Receiver Configuration
1. Download optibox software, and transfer to USB flash memory. Put flash memory into USB port front on optibox receiver , and follow instruction on tv for software update .
2.Connect PC and BOX with RS232 cable
3.On Optibox remote control press button 'menu' then enter 8282 and choose Modem
4.Move left-right until see Ethernet Dongle[SSSP]
5. Confirm settings pressing button Menu again
PC configuration:
1. Download SSSP CCCam client for PC (microsoft windows)
2. Extract arhive and go to folder Plugins
3. Open FLYCCCAM.cfg and enter your Cline in this form :
C: server port username password no { 0:0:3 }
4.Open program SSSP_Cccam1.3.1 and configure like this :
Com Port : COM1 (default)*
Baudrate : 115200
Parity : None
Stop Bits : 2
Data bits : 8
5. Press the Start and watch all channels on your favorite optibox fta prv receiver.
*if your pc have more then one com port , then choose number of com port you pluged in cable
Comment