Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Protex 9600-How to use newcamd on nano/protek/maxx

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hayalet18
    Senior Member
    • May 2011
    • 162

    Protex 9600-How to use newcamd on nano/protek/maxx

    How to use newcamd on nano/protek/maxx
    #1. You will need valid server, pay or other or valid test a/c using Newcamd protokol.
    #2. You will need s/w 1.30.8 or 1.38.4 and latest key.bin file 88/89.
    #3. After you have downloaded s/w, unzip and place on desktop or other easily accessed place on pc.
    #4. Using WEBLOADER, install s/w to the stb.
    #5. IMPORTANT.... make sure to download all channel data to pc also using WEBLOADER, BEFORE you add s/w to stb. this may be needed later to reload channel settings etc. back to stb afterwards.
    #6. Press MENU button on rcu and select INTERNET. Now turn OFF all settings, network connection, auto-update and proxy con.
    #7. Turn ON Newcamd and press 9949 and then the OK button...this will open the Newcamd server menu.
    #8. You will have 3 server options, allwith 6 ports, this will give you a total of 18 ports......PORTS=PACKAGES.
    #9. After you have entered all server details, exit all menus and re-boot using rcu.
    #10. "TRY TO NEWCAMD CONNECT" should appear on screen.
    #11. If you have a valid server, your selected channel should clear.
    #12. If you also wish to use available EMU, you need to turn OFF Newcamd and everything else back ON using the internet menu on the rcu.
    #13. Also c/s still works with s/w



    #1. Press menu button and select INTERNET



    #2. Select NETWORK SETTINGS
    Make sure settings are exactly as you see them in pic,



    #3. Press 9949 and press OK, this will bring you SERVER MENU, if not just repeat process, server set-up window will open



    #4. Enter all server details as you have been given, for each server address etc. Enter all PORT numbers exactly eg. 6789 will be entered 06789
    Repeat for all server ports...18 in total.
    Exit back to TV and RE-BOOT using RCU

Working...