If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Welcome!
Welcome to Satlover forums, full of great people, ideas and excitement.
Please register if you would like to take part. link..
NanoXX 9500 contains several innovative features and sharp prestranda. Through MPEG-4 support delivers NanoXX 9500 razor-sharp picture from HD broadcasts, but also MPEG-2 broadcasts "lifted" securely via built-in Scaler! Recording is done on any external hard drive (optional) connected via USB input. Moving files to and from the hard drive connected through your network. Other features include a. integrated Media player with support for Xvid, MP3, JPG and more. Conax embedded. Updatable via USB memory makes alternative software easy to use.
Connect the NanoXX 9500HD and your internet router with an Ethernet-cable.
Open the menu "Multimedia -> Network -> TCPIP" and push the "OK" –key of your RCU. A green dot will appear next to DHCP. This is because the receiver needs to be allocated an IP-address by your DHCP in order to be allowed access to the internet. (modern routers do that automatically). Thereafter return to the menu by pressing the “Back”-key.
Now open the menu "Multimedia -> Network -> FTP Explorer" and select "NanoXX site" with the "OK" key.
Should the message "Network not available" appear, start the procedure from the beginning.
Now you can see the newest Firmware version.
Then push the red button on the RCU.
The upgrading process starts now. Wait until the receiver reboots, the upgrade is completed only after the receiver reboots automatically.
Comment