disecq and motor

[sideralgr]

is possible to connect a satellite receiver to a morized dish for same satellites and to diseqc switch for others?

[Mobley3]

Re: disecq and motor

is possible to connect a satellite receiver to a morized dish for same satellites and to diseqc switch for others?

Yes indeed , no problem, you just need to assign the Diseqc switch inputs in your receiver. I use such a system with 28E fixed dish on input 2 and my motorised dish on input one.

Regards Mobley 3

[kalpikos]

Re: disecq and motor

is possible to connect a satellite receiver to a morized dish for same satellites and to diseqc switch for others?

I can also confirm that you can

It is possible to do what you want.
In satellite setup select the non standard satellite setup and you will see all the extra setup options.
There you can choose which satellites will be received by the motor dish and which by the fixed dish.

[joseram2000]

Re: disecq and motor

Diseq is possible using two antennas for the diseq A would for example the motor and the fixed antenna B

[sideralgr]

Re: disecq and motor

and if I want to use 3 fixed dishes and one mobile dish on the same cable with diseqc is possible?

[Clark197]

Re: disecq and motor

hi,
what are you trying to do? If you have all equipements you can try it and tell us about the Problem you identify.
All setting depend on the Receiver you use.
#3 fixed dishes and one mobile dish on the same cable with diseqc# could not work on all receiver.

but if you only have one box why would you need a fixed dish? the motorised one will get all you need

Regards
Clark

[kalpikos]

Re: disecq and motor

and if I want to use 3 fixed dishes and one mobile dish on the same cable with diseqc is possible?

You need a diseqc 4x1.
Connect the 3 fixed dishes
and the one with motor in your diseqc
and you will get only one cable for your receiver.

Buy a good quality diseqc and connect:
Receiver->Motor->Switch->LNBs

[Mobley3]

Re: disecq and motor

and if I want to use 3 fixed dishes and one mobile dish on the same cable with diseqc is possible?

When you go to set it up assign the fixed dishes first, this will save confusion as it will remove them from the motorised input, as already mentioned you will need a 4 way Diseqc switch.

Regards Mobley 3

[sideralgr]

Re: disecq and motor

hi,
what are you trying to do? If you have all equipements you can try it and tell us about the Problem you identify.
All setting depend on the Receiver you use.
#3 fixed dishes and one mobile dish on the same cable with diseqc# could not work on all receiver.

but if you only have one box why would you need a fixed dish? the motorised one will get all you need

Regards
Clark

because my mobile dish is limited as dimension max 1m
i use the big fixed dishes for satellites with weak signal

[sucan]

Re: disecq and motor

To be able to view more channels I would prefer using big motorized dish and
fixed small dishes with diseq ( if you have a more free place for those dishes ).
It depends on your personal expectation.